After the tile is pasted, when should I do the beauty seam?

After pasting the tiles, you need to ventilate, and wait until the tile cement is completely dry before you can carry out the beautiful seam, otherwise it is easy to cause the tile to bulge, so the beautiful seam is generally done after half a month after the tile is pasted.

At. Home décor.

There are many opportunities for us to actually use ceramic tiles, such as kitchens, bathrooms, balcony walls, etc. There will be a certain gap between each tile and the tile, if these gaps can not be filled, after a long time, there will be dust, mildew, pollution blackening, not easy to clean the problem, it is easy to affect the appearance, but also affect people's good mood. At this time, the beauty seam is very important, it can make the ground and wall smooth, high strength, good wear resistance, easy to clean, clean and clean, tile can be scrubbed, dirt is not easy to store, avoid gaps, prevent the breeding of bacteria to cause hidden dangers to human health.

After the tile is sewn, it can also effectively waterproof and anti-fouling, so that the joints of the tiles will never be dirty and black, and increase the service life of the floor tiles.

In terms of time, shop.

Good tiles. later, there will be a certain static.

Solidification time. Because the tile that has just been pasted has not yet dried, if you do a beautiful seam at this time, it will affect the effect of the beautiful seam, so you can only deal with it after that.

From the point of view of the order of decoration, because the tile joints have high requirements for the on-site construction environment, it is best to make beautiful seams after the construction process, because it is easy to produce dust and dirt during decoration, such as water and electricity, carpentry, etc., in addition, the temperature of the construction site should be kept at about 5 degrees to 30 degrees.

If it rains. You also need to wait until the weather is sunny to ensure that the tiles have been completely fitted before you can start to do beautiful seams to ensure the effect of beautiful seams.

After the tile is pasted, you should wait until the tile joints are all dry before you can start to make beautiful seams, because then the effect will be very good.

Generally speaking, the time to do tile seam is a week after the tile is pasted, or even longer, and the specific time depends on the adhesive of the tile, that is, the dryness of the cement glue.

After 1 to 3 days, it is necessary to rest the gaps for about a week after the tiles are applied and before the gaps are treated. Otherwise, if the tile is not dry, it will shrink when the tile is dry, and the gap will be easy to become larger, so that the beauty of the seam will not be full, which will affect the overall aesthetic effect.

Laying tiles generally requires the use of cement slurry, and the tiles are fixed after the cement grout is dry. However, because the tiles just pasted are very wet, this environment is not suitable for beautiful seams, and you need to wait for the tiles to dry thoroughly before you can do beautiful seams.

If you have a rainy day, the wait time may be longer. Dry tiles are the most suitable for beauty seams, the gaps at this time are very dry, and there are no impurities and dust, eliminating the step of cleaning the joints, and the beauty joint agent can also be firmly glued together with the tiles.

The walls are generally painted with stucco, which will produce a lot of garbage during the construction process, and latex paint is also easy to drip on the tiles or in the cracks. If you do a good job of sewing in advance, it will be more troublesome to clean later, and it is easy to destroy the sewing agent, so you can do it after completing the wall work.

Kitchens and bathrooms need to install a lot of cabinets, and owners who want to make beautiful seams on the walls and floors must do it before installing cabinets. Because the cabinet will press the tiles, when making beautiful seams, the space is relatively narrow, the construction is limited, and the beautiful seams made are not perfect, and there will be some places that cannot be done.

This will affect the overall appearance and will also affect the use, so remember to do the beauty sewing before installing the cabinet.

2. Under normal circumstances, it takes about 7 days after pasting the floor tiles before you can start to make beautiful seams, and if you encounter rainy season, cloudy days and other weather conditions during the period, the waiting time will be longer.

3. From the point of view of decoration order, after completing a series of work such as cabinets and water and electricity, you can start to do beautiful sewing without dust. At the same time, it is necessary to wait until the floor tile base material is completely solidified and dry before making beautiful joints, and it is necessary to keep the ground gaps neat and clean before doing it, otherwise the overall effect will be affected.

<> "A few days after the tile is pasted, you can sew beautifully:

Normally, the tile can be sewn after 1 week, but if the local temperature is low or it is rainy, it may take longer to make the sewing. If the tile joint is not dry, the joint will be easy to become larger in the later stage, resulting in the joint agent is not full, which will affect the appearance. In addition, before doing the seam, in addition to keeping the tile joints dry, there should be no debris such as cement or sand particles, otherwise it will also affect the bonding of the seam.

What to pay attention to in tile joints:

1. The quality of the sewing agent should not be too bad.

When choosing a sewing agent, you should choose a brand, and the quality of the sewing agent that is too poor not only has a short life, but also has a poor visual effect. At the same time, it will also emit toxic gases, which will affect human health.

2. The best time to do beautiful sewing.

The best time to do beautiful seams is after the tiles are laid, after the tiles are laid, the surface and gaps are relatively clean, and the gaps are exposed to the outside of the hall, without any furniture to cover them, which is easy to operate. If it is operated in the later stage, the ceiling, wall decoration, etc. will produce sand falling, stuck in the brick joint, difficult to remove, and will affect the effect of the beautiful seam.

3. Prepare for filling and sewing before sewing.

Before making beautiful sewing, clean the sanitation and remove all construction waste. And deep treatment of brick joints, it is best to use a vacuum cleaner to suck off the sand and dust in the joints, otherwise it will affect the bonding of the sewing agent.

4. The construction environment should be dry.

During the construction of the seam, the surrounding environment should be kept dry, otherwise it will affect the curing of the seam agent, if the brick joint is wet, it can be dried and then constructed. In addition, it should be noted that if the tile has a hollowing problem, it cannot be made a beautiful seam.

Tiles can be sewn after 7 days of paving.

After pasting the tiles, you need to wait for a while to be able to do the beautiful seams, which should be determined according to the strength of the tiles. There is a rule in the industry that generally speaking, 7 days can be used before the sewing can be processed.

Because after the tiles are pasted, there is a time for curing. Whether it is cement mortar or tile adhesive, it has not dried thoroughly and cannot be used for beautiful seams. If it is passed or stepped on it, it will affect the strength of the tile, and the wall tile is prone to hollowing and falling off.

When is the best time to do beauty sewing?

1. It is also necessary to grasp the time to do beautiful seams indoors, and after pasting the tiles, you can do it in a week. Because by this time the adhesive of the tile has completely dried, the tile is most susceptible to moisture if it is not cured before. At this time, it is likely that the sewing agent will change color and fall off due to moisture.

2. If you need to make a ceiling or install a cabinet, it is best to do a good job of sewing first. If the ceiling is made or the cabinet is made in the room, some of it will be blocked, resulting in incomplete construction. And in the kitchen or bathroom, there is oil and moisture, and if it is humid for a long time, there will be the problem of mildew, so generally speaking, before the ceiling, it is necessary to do a good job of sewing it.

3. Try to arrange all the furniture and so on in place to ensure the effect of decoration. It can also reduce the number of cleanings, and after the home is cleaned, the floor will be sewn again, and the effect will be better.

It is not allowed to do beauty seams within 24 hours after laying the floor tiles, and the beauty sewing agent should be carried out 1-3 days after the tiles are paved. Under normal circumstances, that is, after the tile is pasted in sunny weather, it is necessary to wait until the tile gap is completely dry before the beautiful seam can be carried out, generally about two or three days. If you encounter successive rainy days, the waiting time may be longer, it may take a week or more than a week, because the construction of the sewing agent is also related to environmental factors, and the room temperature must be kept at about 5-30, so as not to affect the construction effect of the sewing agent.

Therefore, under normal circumstances, the tile seam should be tiled 1-3 days after or a week or more before it can be carried out, at this time the tile joint has basically dried, when doing tile seam glue, the adhesion between the tile joint and the tile joint will be better.

Just after the paving, it is not suitable for immediate sewing.

After the tile paving is completed, the cement mortar or tile adhesive used is still in a wet state, and nothing can be done at this time. When the seam is beautiful, it is necessary to pull out the tile clip in order to adjust the size of the seam when laying the tile, so when the tile and the base surface are not firm, it may cause irregular gaps between bricks and even cause wall tiles to fall.

Moreover, when the tile is just laid, it is a little damp, if you do it at this time, the adhesion between the beauty joint agent and the tile will be reduced, and the beauty joint agent is easier to fall off. Therefore, it is best to apply the tile joint 1-2 weeks after the tile is paved.

Decoration Da Cui explained the problem of sewing and the best time for sewing, hoping to help you in decoration.

2. From the order of the decoration process, because the ceramic tile joint has high requirements for the on-site construction environment, it is best to carry out the tile joint after the construction process that is easy to produce dust and dirt, such as water and electricity, carpentry, etc.

3. In addition, the temperature of the construction site should be kept at about 5 °C to 30 °C, if it is a rainy day, you need to wait until the weather is sunny before proceeding, so as to ensure the effect of tile joints.

4 Finally, due to the different functional areas of home decoration, the best time for tile seaming is also slightly different.

5. The beauty of living room tiles is generally after all the furniture in the living room enters the scene, so that on the one hand, it can ensure the decorative effect of the beautiful seams, and on the other hand, it can also reduce the number of cleaning times and keep it clean and tidy. It should take a week for the living room tiles of the new house and the furniture to be sewn after entering the site.

6 The bathroom and kitchen are one of the most important functional areas in the home, and the tiles can be sewn after a week of resting, remember to be in front of the ceiling and cabinets! In this way, the integrity of the sewing can be guaranteed.

Beautiful sewing, be sure to pay attention to these points!! A must do!

1. Be sure to choose a big brand for the beauty sewing agent! It's still very reliable to buy! There are many large and small brands of sewing agents, and the quality of big brands is more guaranteed.

The smaller the details, the better you have to buy. Online shopping is also cheaper. 2. Be sure to do beautiful sewing before the furniture enters the field!

After the furniture enters the field, it is very difficult to do beautiful sewing!

3. The tile seam is more than 2 mm! In this way, it is easy to do beautiful sewing, and the effect is better.

4. Floor heating must be made with special sewing agent for floor heating. Because of the high temperature of floor heating, the non-floor heating special sewing agent is not so durable. Because my house has floor heating, I chose a special sewing agent for floor heating. I didn't have it at the sewing master, so I bought it online.

5. Choose a color, you can choose a strong contrast, or you can choose a similar one. I chose the color close. It feels a little more harmonious. It is very important that the color is well considered and well matched.

6. The size of the tile and the charge are not the same. A set of beauty sewing agent 8 to 10 square meters, in general. You can do the math yourself.

7. Be sure to do it yourself, and don't let the master change the materials!! The quality of the poor sewing agent is really poor!

After the tile is paved, it is necessary to leave a joint, mainly because it prevents the thermal expansion and contraction of the tile from cracking and reducing the service life of the tile.

Generally speaking, it takes a period of time to recuperate between the application of tiles and the treatment of the gaps, and this cycle is about a week. Because the adhesive of the tile just pasted is not dry, before the tile dries out, the tile shrinks when it dries, the gap becomes larger, and the beauty seam is not easy to fill, which affects the overall appearance.

After laying the floor tiles for 24 hours, it is not possible to do beautiful seams, and beautiful seams should be carried out after 1-3 days of tiling. Clean up the gaps to be filled to avoid impurities in the sewing agent after use. Then paste masking paper on both sides of the gap, do not cover the gap, but at the same time cover the floor tiles on both sides of the gap to avoid the beauty grout on the floor tiles.

Load the sewing agent on the glue gun to play the sewing agent, pay attention to the slow time when playing the sewing agent to ensure that the sewing agent is evenly beaten. After the sewing agent is laid, use a scraper to scrape the sewing agent smoothly, so as not to have a bunch of sewing agent. After shaving, slowly peel off the masking paper gently.

After laying the bricks, let the ground dry for at least one day, before you can do the beautiful seams, so as not to wet the ground, and the moisture can not run out after the beautiful seams. When sewing, the ground must be cleaned and done, otherwise it is easy to break.

When making beautiful sewings, all the gaps should be cleaned, and the edges should also be cleaned to keep them dry and ventilated.

Generally speaking, after the tile is paved, it is necessary to wait for the moisture of the tile joint to completely disappear in the tile seam, and the conventional situation needs to be constructed two days later.

After each time, the discharge port is sealed with tape to prevent overflow waste, and there is a little self-overflow in the discharge nozzle when the seam is hooked, which can be erased with newspaper.

After cleaning the garbage and floor in the house, if the cabinets and other things are ready, you can make a joint. Generally, the owner needs to buy the grout by himself for the construction of this half-pack of grouts, and it is generally recommended not to buy a particularly white grout.