What problems need to be paid attention to in the process of decoration of WPC decking?

In the process of decorating, there are waterproof quality problems that need to be paid attention to. WPC decking is no stranger to everyone, this is an excellent flooring. Unlike traditional hardwood flooring and laminate flooring, it can be used not only indoors but also outdoors because it has excellent corrosion resistance when manufactured, so it can also be used outdoors.

It is difficult to maintain strict consistency in the color of WPC flooring, so it is necessary to distinguish when laying, concentrate the colors on the same line as much as possible, and then lay WPC flooring step by step.

1.WPC has the characteristics of slight thermal expansion and cold contraction. In addition, taking into account the cleaning and other reasons, when installing WPC profiles, edges and edges; There must be a proper clearance between the two ends.

The reservation of this gap is also closely related to the climate and temperature during construction. When the construction conditions of the construction site floor are poor and the main structure cannot be stable, the steel keel should be used instead of the wood-plastic keel. Galvanized steel should be used just now, welding slag should be removed, and the rear seat should be rust-proof.

2.In general, when installing the floor, cement or adhesive is generally used, but if it is a plastic wood flooring installation, it will be a bit special. You'll need to use screws and other types of parts.

You can choose stainless steel screws to tighten and fix the keel, which is both delicate and stable. In order to ensure that the buyer can complete the installation related operations by himself in the process of using WPC flooring, the manufacturer will simplify the installation steps and procedures and give detailed instructions. In the process of installing WPC flooring, the installation can be completed in strict accordance with the steps in the manual.

3.For curved WPC decking, it is necessary to cut both ends of each WPC decking according to the length and angle of the curve before laying. There is a professional calculation method for the head-to-head clearance of WPC flooring, and usually experienced teams know how to use it.

Therefore, when installing, it is necessary to find a regular manufacturer to ensure that the installation project can be completed within the scheduled time, and the quality is the best. The above is the answer to the question of what problems need to be paid attention to in the process of decoration of WPC decking.

It is necessary to pay attention to the reasonable planning of the area, the selection of materials, and the decoration situation, and must ask professional personnel to decorate, pay attention to the design of the paving, and do a good job in waterway management.

The problem that needs to be paid attention to in the process of decoration is that it is necessary to choose a better quality, and then also choose a waterproof one, preferably one that is resistant to high temperatures, so that the life can be extended after decoration, and it can be used for a few more years.

Be sure to pay attention to the problem of waterproofing, and pay attention to the problem of heat insulation. At the same time, we should also pay attention to the cost-effective problem of decoration, and we should also pay attention to the plate problem of the vertical board, and we should pay attention to the best problem.

Be sure to pay attention to the flatness of the ground, pay attention to the condition of the ground, pay attention to the temperature when installing, pay attention to the size of the ground, and pay attention to the details of the processing.

Now there are more and more new materials in home decoration, plastic wood flooring is a new flooring material that has both the characteristics of wood and the performance of plastic, and the anti-corrosion performance is very good, so it is suitable for use in more humid places.

Precautions for the construction of plastic wood flooring:

1. Plastic wood can be cut, sawed, drilled and tenoned by ordinary woodworking machinery.

2. Use the expansion tube to fix the plastic wood keel on the floor, the spacing between the fixing points of the expansion tube is 500mm-600mm, the screw cap is lower than the surface of the wooden keel, and the wooden keel needs to be fixed as a whole.

3. Self-tapping screws can be used to fasten between WPC and WPC, and stainless steel self-tapping screws are recommended for outdoor use; Self-drilling and tapping screws should be used for plastic wood and steel plates.

4. When using punching self-tapping screws between plastic wood and plastic wood, the hole should be piloted first, that is, pre-drilled. The diameter of the pre-drilled hole should be less than 3 4 of the diameter of the screw.

5. When installing the outdoor floor, a screw should be used between the plastic wood profile and each keel.

6. The junction points between the plastic wood flooring and the keel are connected and fixed with plastic buckles.

Key points for the installation of WPC decking:

1. Plastic wood has the characteristics of slight heat expansion and cold contraction, and considering the cleaning and other reasons, the plastic wood profile is installed side by side; There must be a proper gap between the ends. The reservation of this gap is also closely related to the climate and temperature at the time of construction.

2. When installing WPC flooring, it is best to install the profile on the keel. According to the thickness of the profile (20mm-40mm), the spacing of the keel is generally between 400mm-500mm.

Plastic wood flooring is more stable than wood flooring, it will not be easy to crack and warp, and the performance of waterproof, anti-corrosion and moisture resistance is very superior, and it is also low and easy to maintain, so now home decoration is also more and more used. The above is an introduction to the construction of plastic wood flooring, if you want to know more about the construction of plastic wood flooring, please continue to pay attention to the first home network.

The waterproof performance of WPC decking is particularly good, so it is widely used in various outdoor construction places, but if the indoor toilet and kitchen floor are relatively wet, the use of WPC flooring is also a good choice, not only has strong wear resistance, but also has good anti-slip performance, so what are the advantages of WPC indoor flooring? What should I pay attention to when installing? Let's take a look!

1. What are the advantages of WPC indoor flooring - waterproof and moisture-proof.

We all know that wood products are prone to rot, expansion and deformation after absorbing water and moisture in a humid and watery environment, and if you use WPC flooring, you don't have to worry about this problem, which is not only moisture-proof, but also has the effect of preventing insects and ants, so that the floor has a longer service life.

2. What are the advantages of wood-plastic indoor flooring - the compartment effect is good.

WPC decking also has the characteristics of good sound absorption, and can save more than 30% of energy compared with other indoor paving materials.

3. What are the advantages of wood-plastic indoor flooring - high environmental protection and recyclability.

WPC decking itself does not contain any benzene substances, and the formaldehyde content is only lower than the national EO standard, and the material can be recycled, which not only saves the amount of wood used, but also benefits the society.

4. What are the advantages of WPC indoor flooring - high fire resistance.

WPC decking has high efficiency flame retardancy, fire rating reaches B1 level, can be automatically extinguished in case of fire, and will not produce any harmful gases.

5. What are the advantages of WPC indoor flooring - strong plasticity.

WPC decking has the characteristics of easy processing, which can be ordered, planed, sawn and painted according to the actual needs of users to meet the application of different styles.

6. What are the advantages of WPC indoor flooring - simple installation.

The installation of WPC decking is also very simple, without complicated construction process, which not only saves installation time, but also saves a lot of costs.

7. What are the advantages of WPC indoor flooring - easy to clean.

WPC flooring is not easy to crack, deformation, no special care is required in the later stage, cleaning is also very convenient, usually as long as you wipe it with water, compared to the period it wood material floor less repair and maintenance costs.

Precautions for installation of WPC decking:

1. The density of WPC decking itself is larger, so when using self-tapping screws, it is necessary to use a drill bit to guide the hole, and then fasten the self-tapping screws, and the pre-drilled hole diameter should be about 1 4 smaller than the diameter of the screw.

2. When nailing on the WPC floor, if you directly use the full force to nail, it may cause the phenomenon of straight nails flying out, it is recommended to gently knock the nails into the centimeter first, and then use all the strength to drive in.

3. When the width of the profile is greater than 8cm, it is recommended to add two screws to each end to fix it.

4. The spacing of the self-trembling sensitive tapping screws for fixing the edge banding WPC floor is best kept at 400mm and 600mm. Of course, other metal materials can also be selected for edge banding.

How is WPC decking made? It is mainly used to use PE and wood powder or bamboo powder, after adding additives, high-speed mixing, granulation, and then using an extruder to extrude the pellets into the molding wood. This type of flooring is mostly used for outdoor platforms such as garden landscapes and villas.

Below, we mainly introduce the advantages and disadvantages of WPC decking.

First, the advantages. 1.Convenient construction.

The WPC surface does not need to be painted. In the construction, WPC is very convenient, and the maintenance cost of WPC is far lower than that of WPC.

2.Minimal attrition.

WPC is a kind of profile, and there are many specifications of hollow. The wood plastic is hollow, and the material is saved. Not only can you reduce the weight, but also increase the strength.

3.Service life.

The service life of WPC decking can generally reach 3-4 times that of ordinary wood, and according to the data, WPC can be used for 10-50 years.

4.Good physical properties.

Good strength, high hardness, anti-slip, wear-resistant, non-cracking, non-moth-eaten, low water absorption, good sound absorption, aging resistance, corrosion resistance, antistatic and ultraviolet rays, insulation, heat insulation, flame retardant, can resist 75 high temperature and -40 low temperature.

5.Easy to process.

WPC decking has the secondary processing properties of wood, such as sawing, planing, bonding, fixing with nails or screws, various profile specifications and standards, fast and convenient construction and installation. It can be processed into various facilities and products through conventional work.

6.Healthy and environmentally friendly.

Ecological wood, environmentally friendly wood, renewable, does not contain toxic substances, dangerous chemical components, preservatives, etc., no formaldehyde, benzene and other harmful substances are released, will not cause air pollution and environmental pollution, 100% reuse, biodegradable.

7.Quaint and generous.

It has the natural appearance and texture of wood. There are no knots in the wood, no cracks, warping, and deformation. Strong plasticity, can achieve personalized modeling, the product can be made into a variety of colors, the surface does not need to be painted twice, and can be kept new for a long time.

Second, the shortcomings. 1.The texture is crispy.

The texture of this material is brittle, the toughness is not enough, and the impact resistance is not strong. This is determined by its internal structure and production process. Therefore, during use, it is necessary to avoid the impact or collision of heavy objects.

2.It's hard to tell the real from the fake.

There are many unscrupulous businesses that use bad wood powder and plastic to produce WPC, because it is not visible to the naked eye and cannot be detected, so it will be deformed after a few years of use, so we must go to a place with quality assurance to buy WPC flooring to avoid ripping with merchants in the later stage.