How do you restore the shine of tiles? How to wipe the tiles cleaner and brighter

Updated on home 2024-07-13
12 answers
  1. Anonymous users2024-02-12

    How to restore the brightness of tiles after a long time 1. Dish soap, soap, etc. can be used for daily cleaning of tiles. 2. Clean the tiles with a mixture of soap and a little ammonia and turpentine, which can make the tiles cleaner and brighter. 3. If there are tea, coffee, beer, ice cream, grease and other pollutants attached to the surface of the tile, it should be scrubbed in time, and sodium hydroxide or potassium bicarbonate solution can be used to decontaminate if necessary.

  2. Anonymous users2024-02-11

    In order to restore the brightness of the tile, the most important thing is to clean the tile regularly and wipe the dust off the surface of the tile with a rag.

  3. Anonymous users2024-02-10

    Therefore, after using it for a period of time, it will be not too bright, and if you want to restore its luster, you need to polish it.

  4. Anonymous users2024-02-09

    1. Usually pay attention to mopping the floor, if there are some stains on the tile and often not cleaned, it will also cause the tile to be foggy and dusty. To do a good job of daily cleaning, every time you mop the floor, you can add a certain amount of baking soda to clean water, or 84 for disinfection. Try to squeeze the mop dry before wiping, and finally wipe it with a dry rag, and at the same time open the window for ventilation and let the natural wind dry the moisture on the tile wall.

    Especially in summer or rainy season, be sure to wipe it again with a dry cloth, or turn on the air conditioner to dehumidify, which can also effectively protect the tiles.

    2. If the tile is still gray after mopping, fill the plastic bottle with water, add washing powder or soap to mix, add flour and white vinegar, shake it fully, and wet it with a rag to clean the tile, which can not only effectively remove the stains on the tile, but also maintain the luster of the tile.

    3. If the tiles are still foggy, we can wax them every six months by waxing, which can also fully ensure that the tiles are as bright as new.

    Second, how to maintain tiles.

    1. Pay attention to when pasting tiles at the beginning, including in the process of transportation, do not destroy the wax layer on the surface of the tile, otherwise it will cause the tile to not shine. After purchasing, if there are tiles that are not bright or of poor quality, we can ask the merchant to re-wax the tiles to restore its beauty.

    2. When cleaning ceramic tiles, you also need to pay attention not to use some detergents indiscriminately, because some detergents have more acid and alkali components, which are easy to corrode the tiles, make the surface lose its luster, and it is easy to get dirty.

  5. Anonymous users2024-02-08

    Soapy water with a little ammonia and turpentine mixture to clean the tiles can make them more shiny. Also scratch the love toothpaste and dry cloth wipe suction repair.

  6. Anonymous users2024-02-07

    When the tiles are dirty, they can't be wiped clean with water, and the cleaning aunt teaches a trick to wipe them quickly and cleanly.

  7. Anonymous users2024-02-06

    1. We can use the baking soda we usually use to clean up. Tiles that have been blackened are actually very difficult to clean. We can try to use baking soda and dish soap to deal with it, and the above little toothpaste has a whitening effect, and after pouring water, you can stir these things to finish.

    Prepare a brush and use the brush to dip a little water in the most prepared cleaner. Next, use a brush to gently brush the black gaps on the top of the tiles. After use, wipe it with a towel and it will be as bright as new.

    This method is suitable for small blackened tiles.

    2. The above is the first method, and the second method can take tile grout. The first thing to do for this gap is to choose one that is similar in color to the tile. That's what you need for a silicone gun.

    The first step is to clean the tiles and then clean them with a brush. Wipe dry with a dry towel during the cleaning process. Because tiles are not allowed to have moisture.

    This is followed by the filling of the tiles. Squeeze out the tile caulk as much as possible along the edge line. When squeezing, you should squeeze along the line, do not bend and bend, uneven up and down, you can also put on gloves first, and then slowly fill in the gaps.

    In this way, the caulking is carried out in a straight line until the black patches of these gaps are gone, and the hairy gaps are smooth. Once all is filled, wait about 2 to 3 minutes to dig up the remaining scraps. After waiting for two hours, all the strain will condense.

    At this time, we can see that the black gaps in the tiles are gone, replaced by new raw materials that have been filled. After filling, it is actually a wipe that does not affect the ground.

    3. Note that there is no moisture in the process of processing. Because once water is added, the caulk that tends to make our caulking becomes less solidified because of the water dilution. At the same time, we will not affect the beauty of the tiles because of dust.

    The tiles in the home should also be cleaned in time.

  8. Anonymous users2024-02-05

    First, the cause of blackening is mainly due to moisture, mildew or sewage erosion. Second, treatment methods: 1. Clean with dish soap (note not to hurt the ceramic tile glaze), 2. If the effect is not good, scrape with a steel wool ball or knife, 3. Dry the treated parts with a dry soft cloth or paper, 4. Apply tile joint waterproof material at the joints (white liquid is transparent after drying) Third, daily maintenance, wipe the tiles frequently with a clean wet towel to keep them dry and clean.

  9. Anonymous users2024-02-04

    You can spray some detergent on the floor first, then wipe it with a rag, and if you come across a stain that is difficult to clean, spray more detergent.

  10. Anonymous users2024-02-03

    Drinking water, alkali and disinfectant are mixed in the container, which not only has the practical effect of decontamination, but also has the effect of sterilization and disinfection. Wash it with a rag and you're good to go.

  11. Anonymous users2024-02-02

    1. Dish soap, soap, etc. can be used for daily cleaning of ceramic tiles.

    2. Clean the tiles with a mixture of soap and a little ammonia and turpentine, which can make the tiles more dry and clear.

    3. If there are tea, coffee, beer, ice cream, grease and other pollutants attached to the surface of the tile, it should be scrubbed in time, and sodium hydroxide or potassium bicarbonate solution can be used to decontaminate if necessary. Ink, cement and other pollutants can use diluted solutions of hydrochloric acid and nitric acid to raise their hands, while paints, coatings and other pollutants are best to use special cleaners.

    4. If there are a few slight scratches on the brick surface, you can apply toothpaste to the scratches and wipe them vigorously with a soft dry cloth to repair them. If the damage is serious, it should be replaced in time or repaired by professionals to avoid personal injury.

    5. Polished tiles should be waxed regularly, and it is advisable to wax them once every 2-3 months. The gaps between the bricks can be cleaned with stain remover from time to time, and then brush a layer of waterproofing agent on the gaps with a brush to prevent mold growth.

  12. Anonymous users2024-02-01

    1. First sweep all the stains on the tiles thoroughly, then pour the water-based wax into a clean dry mop, and evenly apply the wax to the floor tiles. After waxing, remember to let the surface of the tile dry on its own and wait until it is dry before stepping on it. It will take 8 hours after waxing to completely dry, and the floor tiles will become very shiny and as good as new.

    2. Daily maintenance methods of ceramic tiles:

    1) When washing and cleaning tiles in daily life, you can use detergent and soap.

    2) Clean the tiles with a mixture of soap and a little ammonia and turpentine, which can make the tiles clean and bright.

    3) If the surface of the tile is stained with tea, coffee, beer, ice cream, grease and other pollutants, it should be scrubbed in time, and sodium hydroxide or potassium bicarbonate solution can be used to remove the stain if necessary. Ink, cement and other pollutants can use hydrochloric acid, nitric acid dilution solution, but paint, paint and other pollutants are best to use special detergents.

Related questions
9 answers2024-07-13

Through the floor tiles. One of the differences with high-grade floor tiles is whether the surface has been well sealed. The surface of ordinary tiles is full of pores, which have a strong adsorption force for colors and stains. It's hard to get rid of it. High-quality tiles, especially high-grade polished tiles. >>>More

15 answers2024-07-13

1. Dish soap, soap, etc. can be used for daily cleaning of ceramic tiles. >>>More

12 answers2024-07-13

You can choose a special cleaner for floor tiles, pour an appropriate amount of detergent into the water, wipe the floor with a rag, and wipe the serious place directly with the cleaning agent stock solution. It can also be treated with warm water with a household mild neutral detergent, preferably with a special floor cleaning protector that goes with the tiles. >>>More

6 answers2024-07-13

The most essential thing for a family is to have a kitchen. >>>More

7 answers2024-07-13

My home renovation is nearing the end, tired and happy, the most unhappy thing in the middle is candy tiles. >>>More