Can an iron bucket be used to grow flowers, and can an iron bucket be used as a flower pot?

Iron buckets can grow flowers, iron rusts into ferric oxide, and iron is also a nutrient needed for plants. How to plant flowers in Tietong:

Tools: 1 can of spray green, 1 can of silver white, pliers, copper wire, scissors.

Steps: First of all, spray all the iron buckets green, and pay attention to the best newspapers on the ground. Avoid spray paint staining the floor;

Then cut a small circle out of cardboard and place it on the iron bucket. Spray one on the left and one for the eyes;

After spraying, spray a mouth and nose in the same way;

After combustion, the tape lifted from the iron drum is interrupted with scissors. and tie it with a thin copper wire, as shown in the figure below, tie it on both sides and keep it for ears;

Finally, the ears are sprayed green with green spray paint. This is shown in the figure below. Such a cute flower pot kun came out.

Precautions: Be careful not to spray paint on your hands and not to wash them, and don't hurt your hands with scissors.

The iron bucket is a relatively small flower raising tool, suitable for raising tiger piran and gardenia.

Sunflower, aloe vera, caryophyllus, Milanese flower, petunia, begonia flower, jasmine.

Narcissus, Gentleman's Orchid, Fugui Bamboo, Cactus, Succulent, Rose, Fortune Dang, Moon Flower.

Pothos, anthurium, camellia and other plants. The inner wall of the iron bucket will become ferric oxide if it rusts, and iron is also one of the nutrients needed for flowers, which has a good role in promoting the growth and development of flowers.

What kind of flowers are suitable for iron buckets.

Iron bucket is a relatively small flower raising tool, and the inner wall of the iron bucket rust will become ferric oxide, iron is also one of the nutrients required for flowers, has a good role in promoting the growth and development of flowers, want to use iron buckets to raise flowers, you can breed some flowers with relatively small flower types, and iron buckets are also longer than plastic flower pots and ceramic flower pots to raise flowers.

What kind of plants are suitable for iron buckets?

The iron bucket is suitable for raising tiger piran, gardenia, sunflower, aloe vera, caryophyllus, Milan flower, petunia, begonia flower, jasmine, narcissus, junzi orchid, rich bamboo, cactus, succulent, rose, fortune head, moon flower, pothos, anthurium, camellia and other plants.

Precautions for iron drum maintenance.

It should be noted that the iron bucket itself has poor drainage and air permeability, so it is necessary to give the iron pass before raising flowers.

Make a few holes at the bottom to drain the water, and use the iron bucket to raise flowers, you need to put some plastic sheeting or waste newspapers under the iron bucket, so as not to rust the iron bucket and dirty the ground.

A tin bucket can be used as a flower pot.

Before opening the discarded iron bucket, add some soapy water to it, roll it in the yard for about 10 minutes, and store it in a ventilated and light-filled place until it has no smell at all before it can be used to plant plants. Before cutting, you need to prepare some cutters, thick gloves, and goggles.

The iron bucket is relatively easy to cut, so be sure to wear goggles and heavy gloves to avoid injuring the edges of your hands.

Precautions. Before cutting, use chalk to draw a line on the top of the barrel to identify the cutting position, here is an ordinary cutting machine, when cutting to ensure that the incision is smooth, you can use sandpaper to polish it later, to avoid excessive sharpness of the incision.

At the bottom of the iron barrel, you need to drill a row of small holes, which is conducive to drainage, and you can't raise flowers without drainage holes at the bottom.

Because the bottom of the bucket is round, to make a bottom for it, here is a wooden support, so that it will look more natural, these woods are some discarded scraps, after picking it up, you can cut it properly.

Keeping a semi-circular shape, two more wooden planks are prepared next to it, and when they are spliced together, it becomes a wooden base, and the iron bucket can be placed directly on it.

After cutting, the bucket can be placed on top of the wooden pallet, and some pebbles are placed on the bottom of the bucket, and a layer of cinder is spread, so that you can put it in the soil and plant all kinds of shallow-rooted plants, I chose pansies, summer pansies and some small daisies. In the other bucket I planted some of the more common petunias, pines and some hornbeams.

Hello: Tin cans can be used to grow flowers.

As long as the following three conditions are met:

First, open drainage holes at the bottom.

The cultivation of flowers is inseparable from sunlight and water, and reasonable watering is a necessary condition to ensure the growth of flowers. As long as the tin can has a round hole about 3 cm in diameter at the bottom, it can meet the normal drainage required by the plant.

Second, make sure that the bulbs of the flowers are smaller than the tin cans.

The reason for this requirement is to ensure that there is enough soil, generally speaking, the jar is larger than the bulb, and after planting, a finger can be inserted into the edge of the pot, so it is appropriate.

Third, try to choose herbaceous plants for planting.

The rhizomes of herbaceous plants are slender, which can better adapt to the internal space of the tin jar, and there is no need to change pots frequently.

The respondent has a friend who loves to work with flowers and plants, and she suggested that the best way to raise flowers and plants is to use ceramic pots, which are breathable and beneficial to the growth of flowers and plants.

Can the iron bucket be planted with flowers?

Generally speaking, the iron bucket can be patted to plant the flowers. Because the iron in the iron bucket will turn into iron oxide when it rusts, it is rich in iron, which is conducive to plant growth. However, if it is an iron bucket without drainage holes, it is best not to plant flowers, because it is easy to produce water, which is not conducive to plant growth.

Key points for planting flowers in iron buckets.

What kind of flowers are suitable for growing iron buckets.

The iron bucket is mainly used as a pot to raise flowers, so there are no too high requirements for plants. The larger iron bucket can be used to raise foliage plants such as rich trees, large-leaved umbrellas, and happy trees, and the smaller ones can be used to raise cacti, pothos, junzi orchid and other plants.

How to plant flowers in an iron bucket.

1.Clean the iron bucket: pour the soapy water into the iron bucket, then roll it manually for about 10 minutes, then pour out the water and put it in the sun, until the iron bucket is completely gone.

2.Cut iron bucket: The bottom of the iron bucket needs to cut a row of small holes, which is conducive to drainage and ventilation.

3.Fill planting: Put the prepared soil into it, plant the plants.

Precautions for planting flowers in iron buckets.

1.Do not use a drums without drilling, as this is not conducive to the discharge of excess water. 2.The iron bucket must be cleaned before use, otherwise the residue inside will affect the growth of plants.

The iron bucket orange stove can be used to plant flowers, because the iron in the iron bucket will become ferric oxide after rusting, which is rich in iron, which is conducive to plant growth, but if it is an iron bucket without drainage holes, it is best not to use it to raise flowers, because it is easy to produce stagnant water, which is not conducive to the growth of plants, and the iron bucket must be cleaned before use, otherwise the residue inside will affect the growth of the plant.

Can the iron bucket be planted with flowers?

In general, iron buckets can be used to grow flowers. Because the iron in the iron bucket will turn into ferric oxide when it rusts, it is rich in iron, which is conducive to the growth of plants. However, if it is an iron bucket without drainage holes, it is best not to use it to raise flowers, because it is easy to produce stagnant water, which is not conducive to the growth of plants.

Iron bucket flower planting points iron bucket suitable for planting flowers.

The iron bucket is mainly used as a flower pot to raise flowers, so there is no too high requirement for plants, and the relatively large iron bucket can be used to raise foliage plants such as fortune trees, large-leaved umbrellas, and happiness trees, and smaller ones can raise cacti, pothos, junzi orchid and other plants.

How to plant flowers in an iron bucket.

1. Clean the iron bucket:Pour soapy water into the bucket, then roll it manually for about 10 minutes, then pour out the water and place it in the sun until the bucket is completely gone.

2. Cutting iron buckets:A row of small holes need to be cut at the bottom of the iron drum slag dust to facilitate drainage and ventilation.

3. Fill the soil and plant:Put the prepared soil in it and plant the plants in it.

Precautions for planting flowers in iron buckets.

1. Do not directly use iron buckets without drilling, which is not conducive to the discharge of excess water.

2. The iron bucket must be cleaned before use, otherwise the residue inside will affect the growth of the plant.

I think it should be okay, the iron rusts and turns into ferric oxide, which should have no effect on flowers and plants, isn't there a lot of iron in the southern red soil?

I'm also thinking about this problem, there are a lot of babies who drink empty milk powder buckets, I don't know if they can be used to plant flowers @46$

I have an iron bucket at home, there is no drainage measure, that is, some gravel is padded at the bottom, and I throw it outside (on the flower stand) to wind and rain casually, and I don't take it in when it rains, and I planted a mulberry tree, which grows well. Don't just follow me.

After the above analysis and some people's practice, I think it is indeed feasible to grow flowers in iron buckets.

It's not possible to be rusty for sure! But you can definitely grow something, it depends on what you plant.

Stainless steel buckets are not suitable for growing plants, if you must use stainless steel buckets to raise plants, you need to put a plastic sleeve in the bucket, and perforate the bottom of the bucket to ensure that excess water can be drained.

Reasons: 1. Raise flowers in early-closed metal containers, and the secreted acids will corrode the container during the first infiltration growth of flower roots;

2. The cut flower preservative will make the plant growth environment acidic, and the acidic solution will replace the metal ions on the broken metal vase of Lu Qin, so that the concentration of metal ions is high, and dissolve in the solution, which will produce plant toxins, which will lead to serious leaf burning and petal wilting of plants.