What to do if the screen of your Xiaomi phone is not sensitive

The inner screen is damaged and needs to be replaced.

If the screen of your phone is not sensitive or the touch screen is malfunctioning, please follow the steps below.

1. Hardware failure:

If the screen is damaged or the screen is not sensitive, or if you have replaced an unofficial screen, back up important data in advance and bring the purchase receipt to the Huawei Customer Service Center for inspection.

2. Influence of external environmental factors:

1) If there is a strong electromagnetic field nearby (microwave oven, induction cooker, power station, etc.): It is recommended to move away from the strong magnetic field to see if the screen function returns to normal. Environments with strong electromagnetic fields can have an impact on the touchscreen functionality.

2) If the ambient temperature is abnormal (higher than 50°C or lower than -20°C), it is recommended to wait until you move to another place and try again. Abnormal ambient temperature will cause abnormal screen display and touch function.

3. Hardware and accessories:

1) If the screen is stained with water, sweat or dirt: Please keep your phone clean and try again after wiping the phone screen clean. Water, sweat stains, dirt, etc. on the screen will affect the screen touch response.

2) If there is a film on the screen of the phone: please confirm whether the thickness of the film is more than mm. It is recommended to use a film with a thickness of no more than mm, as too thick the screen film will affect the touch sensitivity of the screen.

3) If you find that the screen is abnormal during charging with a non-standard charger and data cable: please replace the standard charger. The non-standard charger has a weak ability to shield interference, which will affect the touch screen function of the mobile phone.

4. Software functions or settings affect:

1) If the phone has installed a third-party lock screen software: It is recommended to uninstall the third-party lock screen software and confirm whether it is back to normal. Some third-party lock software may conflict with the system's built-in lock screen function, resulting in screen jumping, such as:

The screen suddenly jumps to the lock screen or camera interface, etc. If you want to quickly lock the screen but don't want to use the power button to lock the screen, it is recommended to use the "one-click lock screen" tool that comes with Huawei phones. How:

Press and hold on the blank space of the home screen for about 3 seconds to enter the desktop settings interface, tap the window widget, swipe left and right on the small toolbar at the bottom of the screen, find the one-key lock screen, press and hold the tool icon and drag it to the home screen. Subsequently, tap the one-key lock screen widget on the home screen to quickly lock the screen.

Summary. Hello dear, it's a pleasure to serve you. The Xiaomi phone screen fails to move the solution.

1.Restart the law. Please keep pressing and holding the power and off button of your Xiaomi phone.

After about 20 seconds, the phone will be forced to shut down and restart. Wait for the reboot to test the screen again.

Hello dear, it's a pleasure to serve you. The Xiaomi phone screen fails to move the solution. 1.

Respect the law. Please keep pressing and holding the power and off button of your Xiaomi phone. After about 20 seconds, the phone will be forced to shut down and turn on.

Wait for the re-brightening family to start and test the screen again.

2.If the phone still appears, it cannot be touched normally. In this case, you turn on your phone and keep it on the wifi network.

Then find another mobile phone and log in to the official website of Xiaomi Cloud Service. Log in to your Xiaomi, and then erase the data of this Xiaomi phone by looking for the power leakage of the mobile phone, and then wait for the phone to reactivate.

3.If you go through the two methods 1 and 2, the screen of the mobile phone still cannot be touched normally. Then yes, it must be a broken screen of a Xiaomi phone.

Here you can find a maintenance master to replace the screen for you, the TP layer is the touch layer, if you can't replace it, you can only replace the empty Qiao, the whole is always slow.

In addition, some Shenmai Xiaomi mobile phones fail because of static electricity. These classics generally come from mobile phone cases, mobile phone charging data cables, and tempered films. You'd better rule out these things and test them again.

Hello, method.

First of all, we need to detect whether there is a fault in the hardware of the touch screen: enter the "Settings" interface of the Xiaomi mobile phone, and click the "About the phone" item to enter the detailed information interface about the mobile phone.

After entering the "About Phone" interface, clicking the "Kernel Version" item several times in a row will enter "Xiaomi Mi 4".

Hardware" detection interface. When you click on "Kernel Version", there will be a corresponding "Only X steps are required to enter the CIT" prompt.

When entering the "Hardware Detection" interface of the Xiaomi Mi 4 mobile phone, click the "Touch Screen Testing" item to enter the Xiaomi Mi 4 touch screen hardware detection interface.

After entering the "Touch Screen Test" interface, you can detect the capacitive screen at the corresponding screen point position by tapping the screen or swiping.

Good and bad situations. This is used to determine whether the touch screen has a dead pixel.

or other failures.

Of course, when the mobile phone is low on battery, the touch screen will also be insensitive. To do this, you can select the "Power Test" button in the "Hardware Detection" interface.

Then, from the "Test to display the current battery remaining percentage value" interface, compare the remaining battery value with the battery level in the system status bar to ensure that the phone has enough power.

In addition, when the Xiaomi Mi 4 has a malfunction where the touch screen is not sensitive or unresponsive, it can also be caused by improper system settings or software bugs. We can solve the problem by "Clear user data". Turn off your Xiaomi phone 4 completely

Press "Volume +" and "Power Button" at the same time to enter recovery mode. Select "Chinese Simplified" using the "Volume Key" here, and press the "Power Button" to confirm the entry.

From the "Main Menu" interface that opens, select the "Clear Data" item and press the "Power Key" to confirm the entry.

Then, "Clear Cache", "Clear User Data", and "Clear All Data" are executed. Here you can use the "Volume key" to make a selection, and the "Power" key to determine the action.

Finally, restart your phone, select the mode of "Recently Used" in the "Mode" list to reboot into the Xiaomi system. Can.

There are many reasons for this situation, some are poor contact, some are broken screens, some are software problems, and some are compatibility problems, there are too many reasons, I still recommend you to go to the after-sales service to take a look.

What does this need to look at? It doesn't work, if it's caused by Caton, if it doesn't work, then you need to clean up the phone, load some of the programs inside, if it's your phone screen is broken, then you need to replace the screen to solve it.

You can tear off the film first, and then try to see, if it doesn't work, you have to go to the mobile phone repair shop to repair it.

The touch screen of your mobile phone is not sensitive, how to solve the problem of going to the repair shop to find the repair master for repair? If you really can't change your phone.

Xiaomi mobile phone touch screen failure repair tips process.

It should be a mobile phone problem! In this case, it is recommended that you take your mobile phone to the repair shop to find a master to repair your mobile phone!

Go to the local mobile phone after-sales service center for consultation, and the staff will help you solve it.

If the touch screen of your mobile phone does not respond to a certain click, the screen occasionally jumps, or the touch screen fails, it is recommended that you:

1.whether there is any man-made damage to the phone's screen (such as cracks or water ingress);

2.whether to use a non-original film; Whether to use a non-original adapter and use it while charging;

3.Dial interface input * * to enter the hardware detection mode, click "touch screen test", slide your finger on the screen, test the touch screen, see if the sliding line is broken, whether there are unnecessary lines in the non-sliding area;

4.Virtual keystrokes can be asked in the dial interface by entering ** into the hardware detection mode "Keystroke Test"."menu"/"back"It is a virtual button, and the test is whether the button can be successful;

5.If the test fails or fails to calibrate in hardware detection mode, we recommend that you update to the latest MIUI version or factory reset.

6.If none of the above methods are effective, it is recommended to conduct after-sales testing.

PS: Due to the characteristics of the capacitive screen, if the two fingers touch the points too closely, it will be recognized as a point.

The touch of the Xiaomi mobile phone is not sensitive, has the landlord charged the mobile phone? If the phone is not charging, it is not sensitive in the standby situation, it is recommended that the landlord can restart the phone to try to correct the screen when necessary, if it doesn't work, then I will go to the after-sales service to check it, there may be a problem with the screen.

First, open the Device Manager, confirm whether the relevant equipment is installed, and check whether the hardware circuit of the device is faulty; If it is not listed, the hardware circuit of the device is faulty, resulting in them being unable to be recognized, at this time, the laptop should be sent for repair, if the device status is abnormal, reinstall the relevant driver, and the abnormal state of the device can be solved.

No matter what brand of mobile phone touch is not sensitive, it is generally because of the long-term use of the screen, there is a little problem, you can go to the mobile phone store to replace a screen, if you don't like this mobile phone, you can go directly to buy a new one, the mobile phone is not sensitive, or quite common, because the time has been used for a long time.

Turn off your phone and rest for a while, wait for the static electricity to dissipate before turning it on.

Xiaomi mobile phone touch screen failure repair tips process.

After the Xiaomi mobile phone changes the screen, the touch screen is not effective, and the sensitive means that there is a problem with the screen, and when it is replaced, it must be the choice of a cheaper screen, which can only be repaired by going to a repair shop, or changing the screen again.