-
It's easy to start a fire but it's hard to put out a fire, so be sure to remember that! Before starting a fire, be sure to observe the surrounding environment, prepare fire extinguishing items such as sand or water, and pay attention to the influence of other factors such as wind direction on the fire. Before leaving, make sure that all the flames are extinguished.
-
You can pick up a few stones and put them together. Or dig a hole. Find some dry wood and light it. Pay attention to any flammable objects around. Extinguish the water with water when you leave, or cover the fire with dirt and sand.
-
Matches are the most convenient tool for igniting a fire. Carry some more marked with them"Non-secure"、"You can paddle anywhere"The marked matches are tied into a bundle and placed in a waterproof container to prevent them from rubbing against each other, spontaneous combustion, and also to prevent the matches from becoming damp themselves.
Striking stones for fire is to strike downward with the back of a knife or a small piece of steel"Flint"to make the sparks fall on the large fire. A hacksaw with toothed edges produces more sparks than a regular knife. When the fire starts to smoke, slowly blow or fan it to ignite an open flame.
Of course, not all stones can ignite a fire, and the spark struck by the stone must have a certain amount of heat and duration to ignite the fire.
The battery fire mainly uses a battery with a large amount of power, and the positive and negative poles are connected to the two ends of the pencil lead with wood peeled, and in an instant, the pencil lead will burn red like an electric furnace wire.
-
If there is a fire source, you can directly make a fire, and if there is no fire source, there are four kinds of fire: hitting stones for fire, battery for fire, rattan for fire, and convex mirror for fire, as follows:
1. Make a fire directly.
If there is a source of fire, such as a lighter, you can simply gather dry branches and leaves to make a fire.
2. Hit stones to make fire.
This method is commonly found in ** and TV dramas, and it needs to be carried with flint and steel, and the method is to use the back of a knife or a small piece of steel to strike down"Flint"Generate a spark and then let the spark fall on the large fire to live.
3. The battery is on fire.
The principle of battery fire is to convert electrical energy into heat energy, and then use high temperature to make a fire, so this fire method needs to use a battery with a large amount of power, and connect the positive and negative poles together, that is, to cause a short circuit, the battery short circuit will produce high temperature, and the high temperature generated by the short circuit can be used for ignition.
4. Make fire with rattan.
The rattan is to find a dry tree trunk, split it at one end, and open the crack, plug the fire, use a rattan about two feet long, wear it behind the fire, step on the trunk with both feet, and quickly twitch the rattan left and right to make it rub and heat and ignite the fire.
5. Convex mirror for fire.
Convex mirror ignition is the use of any convex lens (such as telescope) with a diameter of two inches or larger, in bright sunlight, can be used to gather the sun's rays, so that they can shine on the prepared ignition object, can ignite the ignition object.
-
Found 7 ways to start a fire without a match, share it here.
The first type: the classical method of drilling wood for fire.
This is one of the most widely understood, but at the same time the most difficult.
First of all, find the right wood for drill boards, dried aspen, willow, etc. will be a good choice because of their softer texture. Then find a suitable branch to make a drill bit, which is relatively hard, and the conditions are not as harsh as the drill plate.
Then, drill the edge of the drill plate into a small inverted "V" shaped groove.
Finally, put a flammable velvet or dead leaf under the drill plate and drill vigorously with both hands until the fire is drilled.
The second type: the classic two-person drilling method.
The other steps are the same as the first method, except that this time two people work together.
One person fastens the drill shaft to the drill plate with a grooved wooden cover, and the other person wraps the drill shaft several times with a rope or rattan with more friction and then pulls it back and forth quickly. This two-player collaboration is much more efficient than the first one.
The third type: simple planer fire method.
Dig a long groove in the softwood plank, place flammable velvet in front of the groove, and push it forward with a hardwood strip until the spark ignites the velvet.
Fourth: Iroquois fire.
Invented by the Iroquois, this device is quite efficient at igniting fire. One end of the drill shaft is wound with two ropes, and the other end of the rope is fixed to a rigid transverse plate. A hardwood wheel is used as an accelerator in the middle of the drill shaft.
When the rope is wound and pressed down on the transverse plate, the drill shaft can be rotated extremely fast and sparks will be drilled.
The fifth: bowstring drilling method.
Similar to the second type of double drilling, except that it can be done by one person.
The drill shaft is likewise covered with a fluted lid and then pulled quickly with a bowstring-like tool.
Sixth: the classic fire retention method of the cave age.
Whether it is a fire made by drilling wood or any other method, a suitable medium is required to cooperate with the combustion of the fire. When the surrounding environment is very humid, it is difficult for the general material to ignite.
Coiled into a bird's nest shape with dry material, hollowed out in the middle to keep as fluffy as possible, and then covered with a layer of velvet. This allows it to ignite even in wet weather.
Seventh: flint fire method.
This kind of is not very high-tech, using flint and steel to hit hard materials, such as steel knives, granite, and so on.
The flint is topped with flammable velvet or charred cloth, and the blow ignites. One thing to note here: the more angular the stone, the better it is to hit the flint, and when the edge of a hard stone is too rounded, you need to break it on the boulder so that the sharp edges and corners can be revealed.
-
Fire is an intense oxidation reaction that takes place during the combustion of matter, and its energy is released in the form of light and heat, in addition to producing a large number of products.
-
There is no sun magnifying glass to make a fire in the wild.
-
Pay attention to the direction of the wind when making a fire, see if it is a headwind, and secondly, see if there is enough water around you, as for making a fire, then you can do it casually.
-
If you have a fire, find some dry wood. Hay lit or dry wood or something... If there is no source of fire, yes. Drilling wood for fire·· Hey hey
-
Domestic camping can make fires, but this kind of living situation generally occurs in unmanaged wild areas; In general, there are rules for restricting the use of fire at camping bases. The original methods of domestic camping fires are: 1. Using a convex lens, after the strong sunlight is focused through the convex lens, enough heat can be generated to ignite the fire; Second, the use of the most primitive and traditional way to drill wood for fire and bow wood for fire.
1. Wugong Mountain.
Wugong Mountain is not only a good place for hiking, but also a holy place for camping. Every year, a grand tent festival is held here, attracting camping enthusiasts from all over the country. Set up a tent, indulge in the mountains, lie on the wide meadow, look up at the starry sky and enjoy the fun of the outdoors, and your body seems to have blended into nature.
2. Hulunbuir grassland.
Hulunbuir grassland is one of the four major grasslands in the world and is known as the best grassland in the world. It has four distinct seasons, spanning three zones: forest steppe, meadow steppe and arid steppe, and is known as the world's most beautiful garden. Camping in the steppe, you can not only taste Mongolian special food, but also enjoy the beautiful galaxy.
3. Yushan Island.
Yushan Island has a rare blue sea and blue sky landscape in Zhejiang waters, and is known as the first sea fishing ground in AsiaThere are a few simple camping areas on the east and north sides of the island, and you need to bring your own camping equipment. Leisure activities include watching the sea view, watching the sunrise on the sea, swimming, sea fishing, touching conch fish, and catching crabs, which is very suitable for relaxation.
-
Making a fire requires skills, how to find a leeward place, how to make a fire without smoking yourself with black ashes, how to choose the right fire, how to add firewood without extinguishing the fire, if you are interested or find someone who often plays outdoors to teach you, you will soon be able to light up the skills. If you study it yourself, you have to explore for a while, but it is not too difficult, pay attention to the arson measures, and set fire to the bottom of the mountain prison to sit through. In order to avoid being sprayed with keyboards for outdoor parties.
Let me show you a few pictures of me making a fire in the wild.
I like to look at it hands-on.
Peel raw chestnuts quickly.
Cut the chestnut into two pieces with a knife, remove the shell and put it in a basin, pour boiling water, soak it for a while, stir it with chopsticks, and the skin of the chestnut will come off. However, it should be noted that the soaking time should not be too long, so as not to lose the nutrients of the chestnut. >>>More
There are quick ways to peel and peel raw chestnuts:
1. Hot water immersion method. Wash the raw chestnuts and put them in a utensil, add a little refined salt, soak them in boiling water, and cover the pot. After 5 minutes, take out the chestnuts and cut them, and the chestnut skin will fall off together with the chestnut shell, which removes the chestnut skin and saves time and effort. >>>More
How to open unspeakable oysters.
1.Place the oysters flat side up on a cloth. You can open it on your hands, but it is recommended to open oysters on the table for Chinese New Year's Eve. >>>More
The method of steaming oysters is as follows:1. Brush the oysters with a brush and put them on the steamer. >>>More