How to deal with mold in the dormitory? What to do if the dormitory bed board is moldy Is it toxic

To deal with the problem of mold in the dormitory, the following methods can be adopted:

1.Use dehumidifiers: Place some dehumidifiers in the dormitory, such as desiccant, activated carbon, etc., which can absorb moisture in the air and prevent moisture.

2.Use an air dehydrating breather: Buying an air dehydrating breather can effectively concentrate and expel moisture to prevent moisture.

3.Air conditioner dehumidification: Use the dehumidification function of the air conditioner to reduce indoor humidity, which can effectively prevent mold.

4.Lime and bamboo charcoal dehumidification: Placing an appropriate amount of lime or bamboo charcoal in the corner of the dormitory can absorb moisture in the air, reduce indoor humidity, and prevent mold.

5.Regular cleaning: Regular cleaning of dormitories, especially in hygienic corners, can prevent mold growth.

6.Open windows for ventilation: Keeping dormitories ventilated and allowing air to flow can help reduce indoor humidity and prevent mold.

7.Avoid excessive moisture indoors: Reduce water use, avoid standing water on the floor after bathing and laundry, and avoid living in humid environments.

If none of the above methods can solve the problem, it is recommended to contact the relevant person in charge of the school or the property management personnel to deal with it.

Mold likes to live in a dark and damp place, if there is mold in the dormitory, you can wipe it with a rag first, and then use 84 disinfectant to dilute it by multiple and spray it indoors, and ventilate it for 24 hours. In this way, the mold and unpleasant musty smell will disappear.

Most molds are non-toxic, and some molds are harmful to people. Mold can be removed with chemicals.

Wipe the surface of the bed board with a towel first, and then brush the mold with an old toothbrush dipped in sodium hypochlorite bleach dilute hydrogen peroxide (3%). Finally, use a hair dryer to dry the plank.

Mold index

With the arrival of the rainy season, the south has entered the rainy season, and the rainy weather in these days has made the air extremely humid. Due to the heavy rain and high humidity of the air, the items in the home are very prone to mildew at this time. Grain mildew, resulting in waste; If the medicine becomes moldy, it will deteriorate.

Preventing mildew is not only a concern for large warehouse departments, but also important for people living at home.

In this regard, according to the meteorological and environmental conditions that are prone to mildew, the meteorological department has produced a mildew index. How to use the mildew index? When the mildew index is 0, mildew is generally not easy to occur; When the mildew index is 1-7, mild mildew is prone to occur, and the goods should be ventilated and cooled to reduce the speed of mildew.

When the mildew index is 8-13, moderate mildew is likely to occur, and the product should be stored in a low-temperature environment; When the mildew index is 14-20, severe mildew will occur, and the goods should be placed in a sealed environment to prevent moisture from entering and accelerating mildew.

The cause of mildew in articles is caused by the reproduction and growth of microorganisms on articles (such as food, cigarettes, textiles, etc.) under certain temperature conditions.

1.The main cause of mold in wooden beds.

The main problem with moldy wooden beds is dampness. This has a lot to do with the dryness and humidity of the raw materials selected in the production and manufacturing of the wooden bed, if the wood is not dry or in the environment with heavy water content, then the wooden bed is prone to the risk of mold, of course, the necessary condition for the mold bed is that the wood bed itself can provide nutrients for the growth and reproduction of mold. Wooden beds, wooden items, contain a large amount of fiber, starch and other nutrients for mold growth and reproduction, so as long as the temperature is suitable, the space environment is humid and stable, there will be a great risk of mold.

2.Wooden bed anti-mildew and anti-mildew measures.

As usual, remove the bed, scrub it with dish soap or laundry, and let it dry.

If you can't brush it off, even if you still leave obvious plaque, you can use a mold remover to treat it, and the mold remover can go deep into the wooden bed to decompose the mold and the pigment secreted by the mold, and dry it, be sure to dry it.

After the mold is cleaned, in order to prevent the wooden bed from becoming moldy again, the anti-mildew and antibacterial spray GNCE5700-F is sprayed to make the wooden bed have a certain anti-mildew ability.

For new beds, be sure to confirm whether the bed is dry enough before use, to avoid too much moisture inside the bed wood and cause mold in the later stage.

Pay attention to the position of the bed and avoid placing it in a humid environment.

It is recommended that you throw away the moldy mattress directly. Mold is difficult to remove completely and has a very negative effect on the body.

In the future, it is necessary to pay attention to frequent ventilation indoors, and the bedding should be dried at least once a month.

Can't dismantle the bedding? Nailed together with the bed slats??

To prevent mold in the dormitory, first of all, we must pay attention to the hygiene of the dormitory, do not let the dormitory be too humid, and always be hygienic.

1. The sun.

The ultraviolet rays emitted by the sun are the best source of disinfection, take the moldy quilt to the sun for an afternoon, and then brush it with a brush in the evening, so that the mold spots are gone. However, natural silk and down wool are not suitable for sun exposure.

2. Alcohol. Wipe with alcohol for about 20 minutes, the mold spots will disappear, and the alcohol can also play a role in disinfection, and the quilt is not easy to mold again after that.

3. Soapy hot water.

The method that is easy for students to get. Soak the soap in hot water and wash the quilt with soapy water, the higher the concentration, the more thorough the disinfection.

4. Rice water.

I have the impression that washing rice water is very suitable for anything, and moldy quilts are also suitable. Soak it in rice washing water all day, and the mold spots can be washed away.

5. Turpentine.

Turpentine is only aimed at the mildew spots on the silk wool fabric, and after wiping with turpentine, put it in the sun to dry, the mildew spots will also disappear.

6. Bleach.

Bleach can remove large areas of mildew spots on the quilt, but most of the bleach is very harmful to the human body, so it is not recommended to use it.

The dormitory should be cleaned once, and the windows should be opened for frequent ventilation, because the dormitory is damp and unclean, and it is easy to mold.

Most people will choose to clean with a rag or use alcohol to remove the mold that grows in the dormitory, this practice is wrong, this can only remove the mold on the surface, but there is no way to remove the mold that grows inside, no matter how you wipe it, it will still grow. Meiboss mold remover can help you solve the problem. Remove mold that penetrates deep into the interior.

1. Open the window for ventilation, the musty smell in the room is mostly caused by the lack of indoor air circulation and long-term uninhabited, it is recommended to open the windows of the room frequently to keep indoor and outdoor air circulation, which can not only remove the musty smell, but also maintain a healthy body and mind.

2. Turn on the dehumidification function of the air conditioner, the humid environment is also the main reason for the musty smell in the room, it is recommended to turn on the dehumidification function of the air conditioner to reduce the indoor humidity and reduce the possibility of mold breeding.

3. Tea dregs, put the dried tea dregs into gauze bags and place them everywhere, which can not only remove the musty smell, but also exude a trace of fragrance.

4. Air spray, once you smell the musty smell in the bedroom, you can use the air spray to evenly spray every corner of the bedroom, this spray has good dispersion, and has a good elimination effect on common molds and bacteria. This protects the products in the space from mold.

1. Open the doors and windows of the dormitory for ventilation.

2. If the clothes, bedding, etc. are moldy, soak the moldy clothes in hot water, wash them, and expose them to the sun.

3. If the wall is moldy, you can use a dry toothbrush to brush away the mold stains, and then wipe it with a soft cloth dipped in alcohol.