Now the newly opened real estate, how is the waterproof, thermal insulation and noise proof effect o

Although the current construction technology is constantly developing, the waterproofing and thermal insulation of the top floor of the new house have also been perfected, and many good friends have lived in the top floor of the building for many years without leakage. 。In fact, the roofing works on the top floors of buildings have strict building design codes.

After the application of cast-in-place concrete, coupled with the double-layer treatment process of thermal insulation layer, waterproof material pavement, hot melt edging, waterproof material, protective layer, etc., it is also necessary to carry out no less than 24 hours of irrigation test, and only after observing that there is no leakage can it be considered to be up to standard.

Roof waterproofing also has a strict service life, and residential buildings generally have a 15-year moral bottom line.

Stipulate. However, there will always be conscientious real estate developers and contractors who do not ensure that the flat roof of the building meets the regulations. Within a few years, it leaked, and even became a water curtain hole in Huaguo Mountain just after delivery, so it is not difficult to understand the resistance of some buyers to the roof.

For the problem of heat on the top floor of the building caused by direct sunlight on the roof in summer, if the construction technology of the insulation layer is compared with the middle floor, the temperature difference is likely to be very large. However, if the insulation layer is not done well, the top floor of the building will be relatively hot.

This needs to be determined by looking at the details of the waterproofing of this building No matter how long the moisture-proof on the top floor of this building has been carried out, even if it has just been made for moisture-proofing, it is very likely that the situation will be different. What you just did is not necessarily better than what you did a few years ago, and it depends on the construction of the project.

In the case of moisture-proof how to do the quality. In some houses, the roof leaks are found in the process of taking the house, and that is because the waterproofing material on the top floor of the building is poorly done. And there are some houses that have not been waterproof for decades, and that is because they were built to prevent moisture very well.

If the insulation is not done well, it will be super hot in summer and colder in winter, so thermal insulation is a must! In addition to the thermal insulation board of the roof, another layer of thermal insulation board can be added to the decoration ceiling to improve the function of thermal insulation. If the home is a paper gypsum ceiling, it is recommended to choose fiberglass wool as a heat insulation board.

Since glass fiber wool is made of man-made chemical fiber, some friends will be allergic to it, and choose paper gypsum board ceilings.

I can seal the fiberglass wool in the ceiling.

In the suspended ceiling, it immediately blocks the generation of ** allergies. Fiberglass wool can not be assembled independently suspended in the air, so it is proposed to be built into a double layer to achieve a stronger practical effect. If you use a calcium silicate board ceiling, you can chooseExtruded polystyrene boardor foam board as a heat insulation board.

There is no problem with the waterproof insulation of the top floor, and the sound insulation effect is also very good, mainly depending on how the developer copes with the construction of the building on the top floor.

Most of them are relatively good, and there are many new types of materials, which are better used and can effectively insulate and waterproof.

Now the newly opened real estate, the waterproof, thermal insulation and noise-proof effect on the top floor is very good, you can go to the field to investigate.