Is it good to install a hard pipe or a hose for an electric water heater?

Updated on home 2024-07-25
32 answers
  1. Anonymous users2024-02-13

    It is best to use a metal hose.

    It has a good resistance to high temperatures, and the resistance of metal hoses is relatively good, and it is more durable than hoses and is not easy to break.

    on electric water heaters.

    On the one hand, it has a long service life and can effectively prevent and control water leakage from the inlet and outlet of the water heater;

    On the other hand, it can effectively avoid the frequent jumping of the power switch of the water heater due to secondary grounding, so it is said that it does not meet the safety and installation specifications when connected with metal pipes.

  2. Anonymous users2024-02-12

    Hello: The hose for the installation of the electric water heater is better, because the hard pipe is easy to crack and easy to harden, if it is a hose, it is relatively durable and better!

    So the electric water heater is installed with a hose! Hope it helps, hope, thank you!

  3. Anonymous users2024-02-11

    Water heaters often oversupply hot water, so it is more appropriate to use a hose.

  4. Anonymous users2024-02-10

    Of course, the installation of the electric water heater is good with a hard pipe, because the power of the electric water heater is relatively large, sometimes it will heat up when the contact is not good, and if it is a hose, there may be a risk of being burned.

  5. Anonymous users2024-02-09

    I think it's better to install an electric water heater or use a hard pipe, which is not easy to deform during use.

  6. Anonymous users2024-02-08

    It is better to use a hard pipe or a hose for the installation of an electric water heater, of course, it is better to use a hard pipe. Compared to hoses, rigid pipes are superior to hoses in terms of life and maintenance.

  7. Anonymous users2024-02-07

    The hose has strong connectivity, strong importability, bending resistance, free expansion and contraction, although the broken pipe looks neat and beautiful after finishing, it is easy to age and crack, so it is better to say that the hose is good!

  8. Anonymous users2024-02-06

    It is better to install a hard pipe than a hose for the water heater water pipe, so that it will not be affected by too hot water and is durable.

  9. Anonymous users2024-02-05

    I think the hose is a little better because the hard pipe is easy to freeze out.

  10. Anonymous users2024-02-04

    It is better to install a hose on an electric water heater because the hose is not easy to break. Safe and durable.

  11. Anonymous users2024-02-03

    Of course, the electric water heater needs to use a hose when installing, because if the hose is used, it will not cause the hose to rupture or cause any accidents when it is heated. Although many people think that a hard pipe is beautiful, if you use a hose with a hard aluminum layer, it is similar to a hard pipe.

  12. Anonymous users2024-02-02

    It is better to use a hose for the installation of an electric water heater, the hose is more durable, and the performance is better than that of a hard pipe, so in this case, it is necessary to use a hose to be more practical.

  13. Anonymous users2024-02-01

    Regarding the question of whether to use a hard pipe or a hose for the installation of electric water heaters, in fact, each has its own benefits. To put it simply, if a hose is used, the installation distance is limited, after all, the hose itself does not have the advantage of stabilizing the water flow force.

    In addition, since the space of the modern family bathroom is becoming larger and larger, and even the installation of the water heater is becoming farther and farther away from the toilet water source, it is the best choice for stability and durability.

    Of course, the hard pipe is not used casually. PPR pipes are generally recommended, and those with thin pipe walls and blue lines are cold water pipes; If there are red lines on the wall of the pipe, it is a hot water pipe.

  14. Anonymous users2024-01-31

    It is better to choose a hose because the hose can be folded and bent.

  15. Anonymous users2024-01-30

    At present, the installation of electric Ricky is made of hard pipes. The hose has low heat resistance, and despite its long use, the hose itself is not prone to aging.

  16. Anonymous users2024-01-29

    It is better to choose a hose, which is particularly convenient and flexible when using the hose, and is more suitable for the application of electric water heaters. The use of hard pipes is not conducive to operation and is not flexible.

  17. Anonymous users2024-01-28

    Personally, I think it's better to use a hose, because in this way, it's convenient to run water, and besides, the water heater needs some plug-in power to heat, so that the water can be boiled through some electric heat, so that it is convenient for us to wash dishes in the winter and so on.

  18. Anonymous users2024-01-27

    Of course, the hard pipe is good, the pressure resistance, the hose is not durable, and it will leak after a few years of use, and it needs to be replaced.

  19. Anonymous users2024-01-26

    I think the electric water heater installation should be better with a hose installation because of the hose. It's more convenient to use, and it's not resistant to breaking, so it's probably better than a hard pipe.

  20. Anonymous users2024-01-25

    Of course, it is better to install an electric water heater with a hard pipe, and the first inlet and outlet water volume is not so large if the hose is installed, and there is a hose, well, there may be a burst pipe after a long period of use.

  21. Anonymous users2024-01-24

    I think it would be better to use a hose for the water heater installation, so that it is more convenient to use.

  22. Anonymous users2024-01-23

    Use a hard tube, i.e. a PPR tube, not a hose.

    Because the water pipeline arranged during the decoration of the home needs to be fixed on the wall in addition to the buried, the buried will be pressurized, especially during the decoration period, and the fixed on the wall needs to use the pipeline fixing card to jam the water pipe.

    If a hose is used, it is easy to have problems.

    After the water pipeline is laid, it is necessary to suppress the leak detection.

  23. Anonymous users2024-01-22

    It is better to install a hose for electric water heaters, metal hoses, convenient and flexible, and high durability.

  24. Anonymous users2024-01-21

    The electric water heater is still good for installing a smoke pipe, although there is scale on the hard pipe, but the hose can be cleaned, I think it is not hardened, I use a hard pipe, I feel OK.

  25. Anonymous users2024-01-20

    I personally believe that in the process of installation, it is better to use a hose, if you use a hard pipe, relatively speaking, it is not conducive to long-term use, and it is not conducive to the narrow space of the bathroom.

  26. Anonymous users2024-01-19

    Electric water heaters should be installed with hoses for easy installation and removal. It is very convenient for future inspection and maintenance. It is best to use plastic pipes, which are beneficial to prevent electric shock.

  27. Anonymous users2024-01-18

    Hoses, look at the feeling is almost the same, the water heater is mostly hot water, I guess the relative hose is more durable.

  28. Anonymous users2024-01-17

    No, because the hose is susceptible to oxidation and corrosion, and has a short service life. PPR hot water pipes and PE pipes are commonly used for the installation of water heaters.

    PPR hot water pipes are generally used as heating connection pipes, and can also be used for hot water pipes of water heaters. PPR is a random copolymer of propylene and ethylene. The PE pipe for the laughing water is specified as blue or black with blue stripes. The color of gas PE pipes is yellow or black with yellow stripes.

    Compared with traditional cast iron pipes, galvanized steel pipes, cement pipes and other pipes, PPR pipes have the advantages of energy saving, environmental protection, light weight and high strength, corrosion resistance, smooth inner wall and no scaling, easy construction and maintenance, long service life, etc., and are widely used in building water supply and drainage, urban and rural water supply and drainage, urban gas, electricity and optical cable sheathing, industrial fluid transportation, agricultural irrigation and other construction, municipal, industrial and agricultural fields.

  29. Anonymous users2024-01-16

    The feasibility of using hoses when installing a water heater depends on several factors, including local building codes, safety requirements, and manufacturer's recommendations. While hoses can be used to connect to water heaters in some cases, metal pipes are generally recommended.

    Here are some considerations:

    Local Regulations: In some areas, building codes may require the use of Gingham Hao piping to connect water heaters. This is to ensure the security and reliability of the connection. Before installing a water heater, local building codes and regulations should be consulted to determine if a hose can be used.

    Safety: Water heaters need to handle high-temperature water, which may generate high water pressure during use. Metal pipes are generally more resistant to high temperature and pressure conditions than hoses, reducing the risk of leaks and failures.

    Hoses may be more susceptible to wear, age, or crack, especially in long-term use and high-temperature environments.

    Manufacturer Recommendations: Water heater manufacturers often provide installation guides that include recommended pipe types and connections. Following the manufacturer's recommendations will ensure that the water heater ruler belt is working properly and that the product warranty is maintained.

  30. Anonymous users2024-01-15

    When installing a water heater, the way you use the hose depends on your local regulations and the requirements of your water heater. In some cases, the use of hoses can serve as the inlet and outlet pipes for the water heater, but in other cases, it may be necessary to use a fixed metal pipe or other specified material pipe.

    Here are some factors to consider:

    Local regulations: First, understand the building codes and safety standards in your area. Some areas may require the use of metal pipes or specific types of pipes to connect water heaters to ensure a safe hole and compliance with building codes.

    Water Heater Requirements: Review the installation guide and manufacturer's requirements for the water heater you are purchasing. These documents often contain recommendations and requirements for suitable pipe materials and sizes. Following the manufacturer's guidelines is an important step in ensuring that your water heater is functioning properly and that your warranty is valid.

    Professional Installation: In order to ensure the proper installation and safe use of the water heater, it is recommended to seek the help of a professional installer. They have the expertise and experience to select the right plumbing materials and install them correctly according to local regulations and water heater requirements.

  31. Anonymous users2024-01-14

    It is best to use a metal hose, which has a better resistance to high temperatures, and a metal hose that is more durable than a hose and is not easy to break.

    For electric water heaters, the industry now requires the use of PPR pipes to weld its inlet and outlet, on the one hand, it has a long service life and can effectively prevent and control water leakage at the inlet and outlet of the water heater;

    On the other hand, it can effectively avoid the frequent jumping of the power switch of the water heater due to the secondary grounding, so it is said that it does not meet the safety and beam closure specifications when connected with metal pipes.

  32. Anonymous users2024-01-13

    No way. The hose is susceptible to oxidation and corrosion, and has a short service life, making it unsuitable for hot water and gas pipelines. Therefore, the water heater cannot all use hoses as connecting pipes.

    PPR hot water pipes and PE pipes are commonly used for the installation of water heaters, which are resistant to high temperature and high pressure, and are very suitable for household installation pipes.

    PPR hot water pipes are generally used as heating connection cover pipes, and can also be used for hot water pipes of water heaters, because this material has the characteristics of high temperature resistance and high pressure resistance. Envy.

    PE pipes are generally used for gas pipelines and water pipes, and it is stated in the relevant regulations that PE water supply pipes are blue or black with blue strips, and PE gas pipes are yellow or black with yellow strips.

Related questions
5 answers2024-07-25

The height is above meters, the spacing does not matter, and the stainless steel bellows connection between the water heater and the water pipe link is used, and the length can be arbitrary. >>>More

16 answers2024-07-25

Heating: It is easy and quick to use, but the installation requirements are extremely high, and it cannot be installed indoors (carbon monoxide will be produced), and if it is installed outdoors, it is long and gas and water-consuming, and it is not environmentally friendly. The technology is mature and the failure rate is low. >>>More

14 answers2024-07-25

Gas water heaters heat up quickly and have a temperature adjustment device, so as long as they are adjusted to a comfortable temperature when they are first used, the hot water will always be at this temperature in the future. The electric water heater is a volumetric type, after heating a tank of water, due to the high temperature (generally about 80) when it is first used, it is necessary to use cold water to eject the heated water, and at the same time to mix a part of the cold water. In the process of ejection, the water temperature is high at the beginning, and the water temperature will gradually decrease with use, so it is necessary to constantly adjust the ratio of cold and hot water when using. >>>More

5 answers2024-07-25

If it is two heating pipes, it can heat a small amount of water, only start one to heat the upper part of the water, if it is a tube, it is not possible.

14 answers2024-07-25

Solar water heater is a one-time investment, energy saving and environmental protection, Shanxi where the sun intensity is very good, the installation of solar energy is indeed good, and the solar water heater itself has an auxiliary electric heater, if the weather is not good when the water temperature is not enough, the water temperature in the tank can be raised through the auxiliary electric heater, which is convenient for users to use, but your floor is too low, you need to put a lot of cold water hot water to come out. >>>More