Why do you have to separate households? Can I turn off the heating without separate heating?

The control of heating households can improve the heating quality and the flexibility of users' heat consumption, and solve the situation that heat users are controlled by each other in the past. At present, all new residential buildings have realized heating control by household.

Household heating, also called independent heating, burns the heating of your own home, and the temperature can be adjusted at will.

Winter heating in northern China burns 100 million tons of standard coal every year, accounting for more than 50% of building energy consumption, which is significantly higher than the level of developed countries under the same climatic conditions, and the serious waste can be seen. For this reason, as early as more than ten years ago, the state piloted household heating in northern cities such as Shenyang and Changchun.

The state has issued a specific plan, the "Twelfth Five-Year Plan" period to complete the first issue of the northern heating area of the existing residential building heat metering and energy-saving renovation area of more than 400 million square meters, and require all localities to complete the transformation task in strict accordance with the agreement. For buildings that have been metered, the area-based charges will be completely abolished, and the actual heat charges will be unconditionally implemented.

Why do you have to separate households? A: Because some residents do not like to pay, late to pay the heat fee, or even do not pay the heat fee. If there is no such thing, the heating company is sick, and it has money to renovate the pipe network.

We didn't say that the division of households is bad, but there is no need to change the old house. New houses can be adopted. Household heating also has its shortcomings, don't say he is perfect.

If a building is used as a whole heating, it should still be used in a vertical way, through the pipe, so as to save materials, the original heating method saves energy and materials, the temperature of each house in the building is different, and the gas stop needs to be stopped in one building together, but these are not problems, and the uneven heating can be changed by speeding up the cycle. If we use a building as your unit, isn't it also an independent sub-household heating? What's the difference between the two?

Don't take the old man for a fool.

How many homes have been dismantled by the heating company? They can't count it themselves, and they have a lot of methods, they have a set for families in need, and if you don't pay the heating bill, you will go to your house to turn off the heating.

No, a few days ago, they also posted notices in the middle of the night in our community, and then after a few days, when there were few people, they made holes in the corridors and both sides of the gate in several units without electronic doors, and some old men and women almost didn't do it with them But, if it's really as Yiran said, then I really thank the leaders of the city As for the reason for the heating company to find a sub-household, what is the reason for the aging of the pipe, I personally think that the heating bill we pay every year should include the cost of repair and maintenance The outdoor ones are broken, and they should pay out of their own pockets! In addition, it is really expensive to take 10,000 steps back, and you can also explain it to the people, everyone is some, which is understandable, but it is too much to say that we have to toss a good house face up

Household heating is simply the heating of each household, that is, each household has an independent heating system, and different independent heating is realized according to the different equipment and heat sources.

Users of household heating can choose the heating method according to their preferences, and the heat can also be measured separately. In general, the heating method used can adjust the room temperature independently, and the heating time is completely controlled.

The state stipulates that under normal weather conditions and when the heating system is operating normally, the heating business enterprise shall ensure that the heating temperature in the user's bedroom and living room is not lower than 18.

Legal analysis: It can't be stopped, because it does not have the conditions for separate heat stopping, and it belongs to the series connection of a single pipe string, and you can apply for heat stopping, but you also have to pay the corresponding proportion of heating fees.

Legal basis: "Property Management Regulations" Article 51 Units of water supply, power supply, gas supply, heat supply, communications, cable television, etc., shall bear the responsibility for the maintenance and maintenance of relevant pipelines and facilities and equipment in the property management area in accordance with the law. Where the units provided for in the preceding paragraph temporarily occupy or excavate roads or sites due to the need for repairs or maintenance, they shall promptly restore them to their original state.

Household heating, central heating, and independent heating are explained as follows:

Central heating: It usually refers to municipal central heating, which is used by the heating equipment of the thermal branch power plant to transport water vapor or heating water to the heat exchange station of each community, and then the heating water is pressurized by the community and then transported to the user's home.

Household heating: refers to the purchase and installation of small heating equipment for heating by users, such as small boilers, gas wall-hung boilers, electric heaters, air conditioners, etc.

Independent heating: It usually refers to the purchase and installation of heating equipment by a community to heat the users in the community. Sometimes it also refers to separate heating.

Legal analysis: It is necessary to decide whether to comply with the regulations according to the local rock mitigation policy, for example, the newly built residential houses in Shenyang must be heated by separate households.

Legal basis: "National Standard of the People's Republic of China - Urban Heating Service" Article 5 Under normal weather conditions and the normal operation of the heating system, the heating business enterprise shall ensure that the heating temperature in the user's bedroom and living room is not less than 18.

Legal analysis: It is necessary to decide whether to comply with the regulations according to the local early difference policy, for example, new residential buildings in Shenyang must be heated by separate households.

Legal basis: National Standard of the People's Republic of China - Urban Potato Marketing Heating Service》 Article 5 Under normal weather conditions and when the heating system is operating normally, the heating business enterprise shall ensure that the heating temperature of the user's bedroom and living room is not less than 18.

The radiator heating system consists of a heat source, a heat medium transmission pipe and a radiator. It is divided into central heating and household heating. So, what is the difference between central heating and household heating. Let's follow the golden flagship flag brother to find out.

Radiator central heating heat source** is mainly generated by burning coal in thermal power plants, due to the large user group can not be flexibly adjusted, the annual heating time is fixed. If this winter is early, radiator users will be frozen! Radiator central heating has obvious deficiencies in flexibility, energy saving and environmental protection.

The thermal energy of radiator central heating is mainly generated by the combustion of coal in thermal power plants. The combustion produces a large amount of exhaust gas, which seriously pollutes the environment, and fine dust particles can also affect human health. The sulfides and nitrides produced by the combustion of coal will form acid rain and are highly corrosive.

The heating heat will also be affected by many factors such as boiler operation, distance and pipeline conditions, water pressure, etc., resulting in uneven indoor temperature for different users, and users must also passively accept it. From the perspective of energy saving, the heating time and temperature of central heating are not adjustable, and the central heating cannot be stopped due to work trips or long-term absence, resulting in a waste of resources. Some households do a good job of insulating their homes and don't need much heat to maintain room temperature, but the heat is coming in.

Radiator independent heating is relative to central heating, whether from the user or the entire heating industry, there needs to be an efficient, environmentally friendly, energy-saving method to replace the traditional radiator heating system. This is where the independent heating system comes in. Independent heating is the use of separate heating for each household.

It is not affected by other adjacent residents. It can flexibly adjust the temperature of the radiator, turn on and off the radiator at will, use economically, save energy, and the heat is comfortable, the heating is rapid, adapt to the environment, energy saving and environmental protection. Nowadays, the world is advocating an energy-saving economy, so independent household heating is a new heating system that fits the national conditions.

Summary. The household heating device can be divided into the building thermal inlet device and the indoor heating system home device. Filters should be installed for both the heat inlet supply and return pipes.

The water supply pipe should be equipped with two filters, the first stage is coarse filtration in the direction of water flow, and the pore size of the filter screen should not be greater than that, and the second stage is fine filtration, and the filter screen specification should be the goal). The indoor heating system of new buildings is generally located in the heating pipe well, and the renovation project should be set up in the special heating meter box in the stairwell, and the space for installation, inspection and maintenance of the heat meter is ensured.

How to control household heating.

Hello, is it the sub-household heating of the house, the house is generally set up with a switch.

The household heating device can be divided into the building thermal inlet device and the indoor heating system home device. Filters should be installed for both the heat inlet supply and return pipes. The water supply pipe should be equipped with two filters, the first stage along the water flow direction is coarse filtration, the pore size of the filter screen should not be greater than, the second stage is fine filtration, and the filter screen specification should be the goal).

The indoor heating system of new buildings is generally located in the heating pipe well, and the renovation project should be set up in the special heating meter box in the stairwell, and the installation, inspection and maintenance space of the heat meter in the Baolu section are also protected.