How about using finger joints for wardrobe decoration? How to identify the quality of solid wood fin

What is a finger joint?

Finger jointing board, in fact, it uses solid wood, and the specific processing process is to process solid wood into boards, and then process small pieces of solid wood after deep processing. These small pieces of solid wood are like fingers, and then the way of splicing is to take the way of ten finger plug splicing, so that the spliced board is called finger joint board, also called solid wood finger joint board.

Advantages of solid wood finger joint board: Because the log strips of solid wood finger joint board are crossed and combined, the structure of this combination has a good binding force on the body. A small amount of glue will be applied during the production process, so the environmental performance of solid wood finger jointed board is indeed better than that of multi-layer board and large core board.

Solid wood finger-jointed boards are not as strict as the requirements for edge banding. And its overall processing performance and cutability are very good. It retains the texture of natural wood and retains the fragrance of natural wood.

To put it bluntly, some of the characteristics of solid wood are basically realized. For example, the thermal insulation performance is good, breathable, and hygroscopic, so the effect is relatively good.

Disadvantages of solid wood finger jointing board: Since the solid wood finger joint board is made by finger jointing, if the span of the board is too large, it may be deformed. The surface of the solid wood finger joint board may have finger marks on the surface of the board, resulting in surface unevenness.

Finger joints may crack due to processing or use. In addition, the raw materials used in the solid wood finger joint board are basically pine, in fact, the wood of pine is not very good, and it is prone to the problem of high moisture content, so it may crack after being affected by the weather.

How to identify the quality of solid wood finger jointing board?

1. Look at the core material growth rings. The larger the rings, the longer the tree, the better the material of the finger-jointed board.

2. Look at the tooth marks. Finger joints are usually divided into open teeth and dark teeth, among which the finger joint plate with dark teeth is the best.

3. Look at the hardness of the wood. The harder the wood, the better the quality of the finger joint board, because it has much less deformation than the average board, and the pattern is more beautiful.

It is also better, and it will make the decoration atmosphere of the home look better, and it can also make the wardrobe better to use, and it can be moisture-proof. It can be identified by the brand, but also by the cut on the side.

It is a good choice, which needs to be judged according to the material and the weight, so that the specific situation can be better determined.

In the process of decoration, you can choose finger jointing board to make a wardrobe, but you should pay attention to choosing a better material. Try to choose eco-friendly materials, which are good for the body.

Solid wood multi-layer board to make wardrobe advantages.

Multi-layer solid wood is a very good custom wardrobe material, it is made of three or more layers of solid wood glue, hot pressing, so multi-layer solid wood is more hard and stable than other materials. In addition, the multi-layer solid wood wardrobe is very good shaped, and the touch is also very good; The last advantage is that the multi-layer solid wood wardrobe is extremely environmentally friendly and can regulate the temperature and humidity in the room.

Solid wood multi-layer board to make wardrobe disadvantages.

The solid wood multi-layer board wardrobe is not perfect, and its shortcomings are mainly reflected in two aspects: on the one hand, it is more difficult to process multi-layer solid wood boards, and the requirements for the process are very high, such as sanding, cold pressing, etc., and the technical ability requirements of the wardrobe manufacturer are also relatively high; On the other hand, if the bad business uses poor quality glue, it may cause the separation and deformation of the plate, resulting in a reduction in the service life. Therefore, it is best to go to the formal channels to buy materials, and carefully check whether the quality of multi-layer solid wood materials is qualified.

Advantages and disadvantages of using finger joints for wardrobes.

Advantages: 1. The surface of the finger joint board is generally brushed with clear water paint, and the environmental protection effect of the paint seal is better;

2. The finger joint board is relatively cheap at present, generally in 110-180 a piece, which is not much more expensive than a good woodworking board.

Disadvantages: 1. The wardrobe made of finger jointing board is not actually a solid wood wardrobe in the traditional sense, the real solid wood wardrobe refers to the flat wood wardrobe, the connection is connected with a wedge or the like, and the finger joint board is still made by a nail carpenter, so it does not have the durability of the solid wood wardrobe in the traditional sense;

2. The finger joint board is generally used in the wood of the forest, this kind of wood species are generally pine, cypress these are not very good, and the process of air drying is generally not very long, the water content is relatively large, so it is easy to deform the list;

3. Now the commonly used finger joint board is divided into a single-layer finger-joint board and a three-layer finger-joint board, and the way the three-layer finger-joint board is much stronger than the single-layer finger joint board for the anti-deformation ability, so we choose the three-layer finger joint board when choosing the splicing board.

Solid wood multi-layer boards are more suitable for wardrobes.

Regardless of the cost, solid wood multi-layer boards are better. The finger joint board also has to be painted, which is more annoying in terms of environmental protection and production process.

The wardrobe is one of the indispensable pieces of furniture in our lives. There are many materials to choose from for making wardrobes, such as solid wood boards, composite boards, plastic boards, etc., and the wardrobes made are relatively good. Finger joint board is also a common board, some people think that finger joint board is not suitable for wardrobe, thenIs it good to make a wardrobe with a finger jointing board

The purpose of finger joint board is the same as that of woodworking board, but the amount of glue used in the production process of finger joint board is much less than that of woodworking board, so it is a more environmentally friendly board than woodworking board, and more and more people have begun to choose finger joint board to replace woodworking board. There are four common thicknesses of finger joints: 12mm, 14mm, 16mm, and 20mm, and the thickest can reach 36mm. There is no need to paste the splint up and down the finger joint board, and the amount of glue used is greatly reduced.

The glue used for finger jointing board is generally milky white glue, that is, the aqueous solution of polyvinyl acetate, which is made of water as a flux, which is non-toxic and tasteless, and even if it is decomposed, it is acetic acid and non-toxic.

First, the advantages of oak finger-jointed board wardrobe.

1. The environmental protection of the oak finger joint board is very good, and the surface of the oak finger joint board is brushed with a layer of clear water paint, and if it is sealed with paint, the environmental protection effect is better.

2. For the time being, the best of oak finger jointing board is still okay, and it will not be much more expensive than woodworking board.

3. Oak finger jointing board belongs to solid wood furniture, so its durability is still very good.

Second, the shortcomings of the oak finger-jointed board wardrobe.

1. Oak finger joints are made of Zen beam solid wood furniture is very elegant, for solid wood furniture is air-dried square material, and workers will consider the problem of connection when doing it, generally speaking, the tree species of square material is better; The material of the oak finger joint board is the wood of the forest, which is cut into a small base through the way of finger jointing, and then the blanking, they will not be very long in the process of air drying, so the moisture content is relatively high, and it is easy to deform.

2. Because the oak finger joint board is not a real sense of the number of solid wood furniture, the real sense of solid wood furniture refers to the flat wood furniture, when connecting, the use of wedges and other things to connect, is the purchase of solid wood square material into the wrench to make, and the oak finger joint board is made by a nail maker, so it is not completely durable.

3. The oak finger joint board is easy to deform, and the best brand door will not use the oak finger joint board as a raw material.

The above is the detailed answer about it, I don't know if you are satisfied with our introduction.

1. Environmental protection is different.

The environmental performance of the plug-in board will be worse, because the plug-in board is basically connected with glue, and the solid wood board has fewer connections and less glue, so the environmental performance is better than that of the plug-in board.

2. The bearing capacity is different.

The bearing capacity and deformation of solid wood boards are much stronger than those of plug-in boards, so solid wood boards will be more cost-effective.

3. **Different.

Because the finger joint board refers to the solid wood board is relatively small, connected together with a plastic bottle, and the solid wood board refers to a whole piece of wood, so the plug-in board is much cheaper than the solid wood board.

4. The effect is different.

The finger joint board looks messy, that is, the pattern and color of the whole board are different, while the solid wood board will not, so the effect is also different.

5. The quality is different.

Solid wood boards are workable and can be cut, drilled, sawn and shaped, while solid wood finger joints are prone to deformation and cracking.