Can the other outlet of the water heater be connected to the hot water of the washbasin?

When the water heater comes out, another port can be connected to the washbasin for hot water, but a tee needs to be installed to connect it.

The method of connecting the water heater to the basin is as follows: connect the water pipe to the basin at the other outlet of the water heater, and the hot water can be successfully connected.

The installation of water heater pipes and the installation of water heaters is a unified process, considering the installation of water heater pipes to determine the installation position of water heaters, this position has certain requirements, this requirement is to choose the wall position to ensure that it can withstand twice the weight of the water heater filled with water, and the fixtures of the water heater are installed, and it can also ensure that the water storage water heater has room for maintenance.

If you install an electric water heater, the main task is to install the upper and lower pipes of the water heater. The water heater water heater water supply pipe into the hot water tank end will be provided with a soft plastic hose, and the lower end of the water supply pipe is provided with a mixing valve, this mixing valve and the home water pipe and sprinkler head are connected separately, and the other end of the hot water tank has a connecting pipe for air intake in the upper part.

It's very simple, first of all, your basin faucet should be hot and cold, and then switch there to get a tee, one end to the tap water inlet pipe, one end to the basin faucet, and the last end to the shower, you can do it.

On the hot water pipe, connect a tee, and then connect a water pipe with inner wire at both ends from the top of the tee to the basin faucet, and you're good to go.

Before the renovation, it is necessary to make the hot water pre-buried pipe between the washbasin and the water heater.

Connect a T-shaped tee to the water heater outlet so that the hot water can be diverted to the shower (the shower needs to be installed with a control switch), the washbasin and the kitchen.

Connect the embedded hot water pipe to the hot water tap inlet on the washbasin with a hose, and then connect the cold tap inlet on the washbasin to the tap water.

In this way, hot water can flow out of the tap and the water temperature can be adjusted.

Connect the water pipe to the basin at the other outlet of the water heater.

It's a very, very profound question.

Hello dear!We will be glad to answer your questions. How to get the washbasin to quickly shout rotten water heater answer, pro:

From the cold water pipe of the wash basin, add a tee, and connect the cold water pipe on one side;One side is connected to the original wash basin with cold water;The other side is connected to the inlet water of the water heater. Water Heater Outlet (Hot Water Pipe) Connection: If you only need to connect to the wash basin, connect it directly;If you still need to connect to other places, add a tee to the outlet pipe, you need two water points, you can have any questions, you can give me feedback in time!

The user can directly connect the hot water outlet of the electric water heater to the wash basin through the pipe.

Electric water heaters can be divided into three types: water storage type (also known as volumetric type or heat storage type), instant heating type, and rapid heat type (also known as semi-water storage type) according to the heating power. Although the volume of ordinary quick-heating electric water heaters and dual-mode electric water heaters is about the same, the internal structure is very different, and the quick-heating electric water heater is only smaller in size and more powerful than the storage electric water heater;

Therefore, it is indeed faster than the storage electric water heater in terms of heating speed, but it cannot achieve instant heating in spring and autumn, and it needs to be preheated, that is, it needs to wait, while the dual-mode electric water heater can be used in the instantaneous mode in spring, summer and autumn, which is instantaneous and hot.

A faucet with a mixing function for the wash basin will do.

1. Install a tee pipe fitting on the hot water outlet pipe of the water heater.

2. Connect the hot water pipe to the wash basin from this tee fitting.

3. Install a hot and cold double water inlet mixing faucet on the wash basin and connect it with the hot water pipe.

4. In this way, there are both hot and cold water, and the appropriate water temperature can be adjusted according to the need to mix water.

The following is a double inlet hot and cold faucet.