Is it necessary to separate dry and wet in a bathroom of less than 4 square meters? Why?

Housing prices are getting higher and higher, so there are many small apartment types in the living area to meet the living needs of the people who just need it. The area of commercial housing is not there, in the past, our house area was so large, especially in the big city, every inch of land is expensive, and there are few bathrooms and shower rooms like this. Of course, you have to do it, the water vapor in the bath can't come out, and the bathroom will get wet everywhere after taking a bath.

While removing water vapor, it can also protect the electrical appliances in the bathroom, which is safe, healthy and comfortable. Very comfortable! It is relatively troublesome from the sanitation to clean up, and the bathroom is cleaned up after each bath to ensure that it is clean as a whole, and it is also for safety considerations, because the wet ground is easy to slip and fall, resulting in safety problems.

When it comes to bathroom decoration, some people will inevitably talk about "dry and wet separation" - the so-called dry and wet separation refers to the use of partitions to separate the shower area from other functional areas (washbasin, toilet). The shower area is the wet area, and the other functional areas are the dry area. Dry and wet separation is not good enough will greatly shorten the service life of bathroom products, especially the wet ground is prone to accidents, the previous decoration has also used water retaining strips, but found that it is not good-looking, now the home is installed is the shower room, that is, beautiful and practical, the big transparent glass makes people look comfortable.

When it comes to bathroom decoration, some people will inevitably talk about "dry and wet separation" - the so-called dry and wet separation refers to the use of partitions to separate the shower area from other functional areas (washbasin, toilet). The shower area is the wet area, and the other functional areas are the dry area. Dry and wet separation is not good enough will greatly shorten the service life of bathroom products, especially the wet ground is prone to accidents, the previous decoration has also used water retaining strips, but found that it is not good-looking, now the home is installed is the shower room, that is, beautiful and practical, the big transparent glass makes people look comfortable.

The so-called separation of dry and wet in the bathroom, dry: toilet, makeup area. Wet:

Shower and bathtub, wash basin, washing machine. There are conditions to divide, the area should be large, and the current thinking is two bathrooms and three bathrooms to reflect the pattern of the house, and the design should also be reformed! Moist air stays in the bathroom for a long time, causing poor air circulation and even breeding bacteria.

The concept of wet and dry separation refers to the separation of the sink and bathroom, or the separation of the shower area from the toilet and basin area. Dry refers to the sink, wet refers to the bathroom.

There is no need to do dry and wet separation in the bathroom of less than 4 square meters, if you do dry and wet separation, it will be a waste of space, and the field of vision will be very small.

I think this is too small, so there is no need to do a wet and dry separation, because if you do the wet and dry separation, there is not much space left in it.

The 4-square-meter bathroom is still a bit too small, and I personally feel that there is no need to do dry and wet separation, because it will make the space more cramped, and it is not very convenient to use.

There are many advantages to separating wet and dry in the bathroom, waterproof, moisture-proof, mildew-proof, and anti-electric shock. But now most of the new houses are small houses, with bathrooms of less than 3 square meters. It's too hard to make partitions in such a small space.

Wet and dry separation is not a safety regulation and can therefore be omitted naturally. The most commonly used way to separate dry and wet in a small bathroom is to separate the shower area in the bathroom, use a glass partition, or make a shower curtain water retaining strip, although this method is not a real separation of dry and wet, it can also solve the problem of bathing and wetting the bathroom.

It is recommended to do dry and wet separation, which can make our life more comfortable and convenient. If you have the following two conditions, you can also do not want to separate dry and wet. If your shower area and wash area are separated, it is divided into two areas, and the separation of wet and dry works well as well.

This shower room is made of high-quality tempered glass, which is safe, healthy and durable. The automatic cleaning technology based on the lotus leaf principle makes the cleaning more convenient and labor-saving.

It is very convenient to use stainless steel slide bar in the aging chamber, it is very convenient to use stainless steel slide bar, it is very durable, and it is very safe to use. If you think the shower still takes up too much space, you can use a curved shower curtain, which is a good deal, but remember to make a retainer underneath.

If you feel that the shower still takes up a bit of space, it is highly recommended that you use a shower curtain, which not only perfectly separates dry and wet, but also decorates the monotonous bathroom environment with various patterns and patterns. The shape is very unique, beautiful and full of character. The curved slider made of high-quality stainless steel is sturdy and durable, and has an excellent load-bearing effect.

It will not rust after long-term use. The high-quality fabric is waterproof and hangs beautifully in the bathroom. The large bright yellow pattern is printed on the shower curtain.

The shape is simple and atmospheric. The selection of high-quality polyester fabric, soft and comfortable feel, excellent breathability. The exquisite sewing process can effectively prolong the service life.

Hanging in the bathroom is also a beautiful sight.

I think it's necessary to do it. Because of the small area, there should be toilets and showers. There is separation, and it can be relatively independent. It's also more convenient to use.

It is also necessary to do dry and wet separation in a small bathroom. There are so many benefits of doing a dry and wet separation in the bathroom - waterproof, moisture-proof, mildew-proof, and anti-electric shock.

For the bathroom with a relatively small area, you can do some hierarchical design, and it is not necessary to do dry and wet separation, and it is easy to store if there is a sense of hierarchy.

Dry and wet separation is a very good bathroom design, which can not only achieve reasonable space planning but also save a lot of time for users, but also ensure the dryness outside the shower area, giving people a refreshing and tidy bathroom environment. So small one4 square meters of bathroom dry and wet separationHow to design it? I will write it down for the owners below4 square meters of bathroom dry and wet separation4 square meters bathroom dry and wet separation design skills

1. Dry and wet do not have to be in the same space.

As long as you break the idea, it is not necessary to place the dry and wet partitions in the bathroom, the toilet and shower can be placed in the bathroom, and the wash basin can be placed outside, which is a very clever solution to the big problem of dry and wet in the world.

2. Semi-open glass separation.

The separation of the shower with glass can achieve the separation of dry and wet in minutes, and the shower room on the market today has two types: corner and slotted. As for which type to choose, it depends on the layout of the bathroom.

3. Wall partition.

The wall partition is very fashionable, and there are generally three designs for the practice, namely a low wall, a half wall, and a whole wall, and its dry and wet separation effect is needless to say, right? You can design the method according to your favorite style. For example, I really like the half-wall, half-glass design, which is very retro.

4. Install water retaining strips in the bathroom.

The water strip is to block the running water when showering, the area of flowing water can be intercepted, so that the bathroom is kept dry at all times, the height of the water strip is generally about 40mm-50mm, and the style can be selected according to the house type. Its material is basically made of artificial stone or marble, basically artificial stone is used more, the surface of the material is flat and smooth, and it is very easy to clean.

5. Shower curtain partition.

Shower curtain partition is the simplest practice in dry and wet, although the waterproof is relatively poor, but it is very cheap and simple, large and small apartments can be used, when the waterproof strip is relatively high, the shower curtain is relatively more OK, but here is a reminder, because the fabric is often wet, it is easy to mold, so you need to pay attention to the ventilation and moisture dispersion of the bathroom. If it is still moldy, replace it, ** is not expensive, and you can also change it to a new fancy shower curtain.

That's it for the design tips. This article will introduce to you that no matter how small the bathroom can be designed for both wet and dry purposes, I believe that everyone hopes that the bathroom at home is separated from dry and wet, and friends can design their own bathrooms to their heart's content!