The ceiling is plasterboard, how to suspend the ceiling

A new type of gypsum board system that can effectively prevent the decoration of seven fears.

Seven fears of decoration: seven common problems in decoration projects.

One is afraid of artificial springing lines.

Second, I am afraid that the standards are different.

Third, I am afraid that the spacing is too large.

Fourth, I am afraid that the nails will be uneven.

Five are afraid of hitting the air crookedly.

Sixth, I am afraid that the seams will crack.

Seven are afraid of drumming and deforming.

Abbreviated as decoration "seven fears".

Prevention function: It can effectively prevent seven common problems in decoration projects.

One is afraid of artificial springing lines.

The cost of manual elastic wire increases.

1. Two people can play up to 180 pieces of gypsum board a day, which is a waste of labor costs;

2. During the elastic line, the fracture rate of gypsum board is as high as about 5% due to the error of the artificial platen;

3. Low efficacy, resulting in project delay.

Second, I am afraid that the standards are different.

The disadvantages of different standards.

1. There is no clear standard control, and the quality of the project is not guaranteed;

2. There is no clear standard, and the acceptance of the project by the acceptance personnel is more troublesome;

3. There is no standard, and it is difficult to supervise;

4. There is also the possibility of stealing beams and replacing columns.

Third, I am afraid that the spacing is too large.

The disadvantages of too much spacing.

1. There is a phenomenon that the keel spacing is too large and the construction is not standardized, and the project quality is poor;

2. The keel spacing is large, and the performance of sound insulation and fire prevention is greatly reduced;

3. The keel spacing is too large, which is easy to cause gypsum board deformation.

Fourth, I am afraid that the nails will be uneven.

The disadvantages of uneven nailing.

1. The spacing between nails is uneven, which is easy to produce internal stress, which in turn causes deformation;

2. The uneven nailing is a great shortening of the life of the project decoration.

Five are afraid of hitting the air crookedly.

The disadvantages brought by the shortfall and crookedness.

1. The screws are hollowed out and crooked, which greatly reduces the sound insulation and fire protection performance of gypsum board;

2. Playing crookedly leads to uneven force, which is easy to cause gypsum board deformation and reduce the quality of the project.

Sixth, I am afraid that the seams will crack.

The disadvantages of cracked joints.

1. The crack of the joint causes the project to be redecorated;

2. Crack joints bring losses of manpower, material and financial resources.

Seven are afraid of drumming and deforming.

Unfavorable factors caused by drum deformation.

1. The drum is deformed and the project is redecorated;

2. The deformation of the drum reduces the aesthetics of the decoration.

This is very simple, first do the skeleton grid above, there are two kinds of materials, metal and wood strips, it is easier to decorate with wooden strips, and then pave them one by one, fix them with steam nails and grub screws, and then scrape putty ash on the ceiling, remember to stick a layer of asbestos mesh at the interface of each piece of plaster to prevent cracking, and you are done.

You can find a professional construction team to do it, the quality is ***, Luwen professional subcontracting ** has a lot of information about the construction team, you can go to see it, or release your project information.

After the house has been renovated for a long time, it is inevitable that there will be some problems, such as ceiling cracking, etc., how to repair the crack of the ceiling? How do I install a roof? Next, I will introduce you to the relevant content, so that we can take a look at the lack of our state.

Plasterboard ceiling repairFirst, go to the building materials market and buy foam sealant. The sealant is aesthetically pleasing and can be used for painting. If you buy a bottle sealer, it is more convenient and can be used directly on the glue gun.

If you buy a barrel sealer, you need to mix and mix.

Plasterboard ceiling repairAfter agitating the caulk, fill the caulk with a glue gun along the cracks. When filling, some layers of paper must be placed on the floor to prevent it from falling onto the floor and staining the floor. Then use a scraper to flatten the liquid covering the gap, remember to scrape a few times, and finally remove the sealant from the gap.

Plasterboard ceiling repairWait for two or three days, the cement slurry will be completely solidified, pay attention to the foam around the first cleaning, it is difficult to clean after it is completely solidified. After repairing the cracks in the roof, it will be different from the surrounding walls. You can consider using some small objects to cover the cracks, which is more aesthetically pleasing.

Plasterboard ceiling repairLet's take the installation of 3 5 square house dress stuffy roof frame as an example. First of all, we had to prepare 15 three-dimensional roofing products, which are expected to be installed in a good wooden roof frame. Start by measuring, comparing the size of the product and the skeleton square, and if there is an error, adjust it.

Plasterboard ceiling repairThen install in order, first install the second column, install left and right after installation, the installation order is the center row of a single row first, then left and right in turn. The principle of installation from the inside to the outside is to make each product of the three-dimensional ceiling symmetrical and homogeneous, and no different dimensions will be produced due to the finishing factor of the three-dimensional ceiling.

That's my rightPlasterboard ceiling repairI hope it can help you.

You can get it for free

When people decorate roofs, they will choose suspended ceilings, and some people will be more concernedCeiling ceiling gypsum boardand see if you decide to choose it. When deciding to use this material, people will worry about the quality of ceiling gypsum and the quality of this material.

Ceiling ceiling gypsum board1. The first decorative gypsum board, which is made of gypsum, is mostly gypsum. It is a newest and most practical material that can be used in all our interiors. Architectural decorative gypsum board has the characteristics of light weight, moisture-proof, non-deformation, flame retardant and so on.

In addition, it has the advantages of simpler construction and can be sawed and brushed for bonding. Its main varieties are: several flat and patterned plates, semi-perforated and perforated plates and waterproof plates.

The board embossing is suitable for living room, bedroom and study on the roof of the living room, in the hue of the pattern vivid, fresh and generous, waterproof board, mainly used in kitchen, toilet and other high humidity places, also suitable for medium and high decoration.

Ceiling ceiling gypsum board2. The second type of gypsum board is made of gypsum slurry as the core and paper as the board on both sides of the face. Gyppool board is used for interior wall partitions and ceilings. It can be fireproof and waterproof, and is very practical for high humidity walls, such as bathrooms, kitchens, etc.

This material sound-absorbing based paper is made of gypsum board paper as the base material, the surface is coated and perforated, and has the characteristics of fire prevention, leakage and sound insulation, heat insulation, vibration resistance, and good convenient construction.

Ceiling ceiling gypsum board3. The third is fiberboard gypsum board is the main material of building gypsum, and adding an appropriate amount of fiber to mix together can make the material better. The board has greater bending resistance than drywall and can be used for interior walls and partitions, as well as wood. In traditional drywall, the production of gypsum board and chain beam decorative gyplight is increasing, and the production of drywall is decreasing.

There are also new products, such as gypsum acoustic panels, laminate boards, heat insulation boards and composite gypsum boards. Gypsum board specifications are also moving towards high thickness and large size.

Ceiling ceiling gypsum board4. The fourth hollow gypsum strip is a gypsum based structure, and the keel will not be used during installation, and it is a faster developing ceiling material.

Here's what we've learnedCeiling ceiling gypsum boardThere are several types, it can be seen that there are many types to choose from, and we can also choose these materials when we are suspended ceilings.

You can get it for free

In renovations, plaster lines are usually installed on the ceiling. But I'm sure many people are the same as I thought, that is, no matter what the plaster line is handled, the shape of the ceiling is the most basic. In other words, in order to achieve a good result, the shape of the ceiling must not be unsightly, otherwise even if plaster lines are installed, the effect will be mediocre and may also lead to visual confusion.

In fact, when I saw what my neighbors were doing, I realized I was wrong. It turns out that the installation of gypsum ceiling corner flowers, to achieve beauty, the shape of the ceiling is not important.

From the neighbor's house, their plaster ceiling corner flowers mainly surround the flash. The only difference is that the ceiling in the living room is constructed of a sloping and broken roof, and the ceiling in the dining room and event area is mainly equipped with air conditioning. The shape of this piece is common.

However, it is also such a common gypsum ceiling corner flower shape, and after installing the gypsum line, the effect is very good. And it's not hard to see that neighbors are much more careful when installing plaster lines than when modeling ceilings.

For example, the plaster line on the ceiling of the living room, the neighbors not only covered the original top surface, but also added plaster ceiling corner flowers around the perimeter. At the same time, to the top corners, the neighbors also installed 3 cm wide lines. Of course, there is also an 8 cm line at the bottom of the slope top.

Another example is the pre-ceiling plum board in the dining room and event area. Neighbors install plaster ceiling corner flowers in each shade corner. So even if the latex paint hasn't been painted yet, it's not hard to see that there are many layers on the entire ceiling and it looks exquisite.

Some friends may say that in the case of so much silver in the gypsum line and gypsum ceiling corner flowers, the oilman should be more troublesome to work. In fact, it's true. But the neighbor's oilers were willing to do it.

According to the master, although it is troublesome to build such a house, the neighbors will also give a little more remuneration so that the basic salary can be guaranteed every day. At the same time, due to such a good new house effect, they can also be used as model homes. So, no matter how you look at it, it's worth it.

Therefore, through the above, we also remind everyone not to pay too much attention to the design of the ceiling when decorating. For example, as long as the plaster line can be well matched, mostly on the plaster line matching, take some time, then no matter how ugly the shape of the ceiling is, the overall effect will not be bad. Again, the cost of the gypsum production line is not high, so it is worth it.

I wonder if you used a lot of plaster lines and gypsum ceiling corner flowers to decorate your house when you renovated.

You can get it for free

Many people are familiar with gypsum board, it is also one of the most common materials in our ceiling, it is also relatively cheap in terms of **, and the shape made is also very beautiful, favored by many owners, then next, we will introduce it to all of youLoading letters and sending to repair gypsum board ceilings1. How to decorate gypsum board ceilings?

1. How to decorate the gypsum board ceiling - make preparations before installation, check the net height of the house and the ceiling equipment, and pop up the elevation line on the wall, and pop up the control line of the layout point of the boom at the bottom of the floor slab.

2. How to decorate the gypsum board ceiling - drill holes in the position of the boom, connect the boom with the structure with expansion bolts, and then connect the main keel with the suspension bar with the hanging piece, and then complete the installation and fixation of the side keel, the secondary keel and the cross brace keel in turn, but during the installation should be adjusted in accordance with the construction specifications, and the ceiling arch is 1 200 of the short span.

3. How to decorate the gypsum board ceiling - to choose the appropriate gypsum board, and then use self-tapping screws to fix the gypsum board on the secondary keel and the cross brace keel, but to control the nail distance when operating, the nail head is embedded in the gypsum board is appropriate, and the top hat should be coated with anti-rust paint and smoothed with putty.

4. How to decorate the gypsum board ceiling - after the gypsum board is installed, the board should be filled with caulking putty, then select the appropriate seam paper tape, and paste the seam paper tape on the joint with adhesive.

5. How to decorate the gypsum board ceiling - apply putty on the gypsum board, pay attention to the joints and ends of the putty when applying, after each layer of putty is dry, polish it with sandpaper, scrape it 1 time and polish it 3 times.

6. How to decorate the gypsum board ceiling - after the putty is applied, use a roller brush or spraying machine to apply decorative paint. However, when using the spraying machine, it is necessary to control the spraying pressure, spraying distance and sequence.

Second, gypsum board ceiling installation needs precautions.

1. Precautions are required for the installation of gypsum board ceilings: the installed keel cannot be stepped on, and other pendants or heavy objects cannot be hung on the light steel keel.

2. Gypsum board ceiling installation needs precautions: during the construction of the ceiling, it is necessary to pay attention to the protection of the installed line pipe, and the boom and keel of the light steel keel cannot be installed in the ventilation pipe and other equipment.

3. Precautions are required for the installation of gypsum board ceilings: the installed ceiling is strictly forbidden to collide and pollute.

The above content is an introduction to how to do gypsum board ceilings and the precautions required for gypsum board ceiling installation.

Gypsum ceilings have a low cost, so they are popular with many friends. Then the gypsum ceiling has the effect of fire protection and heat preservation, which is also very practical. As an airtight gel substance, it has a good sound and heat insulation effect.

Gypsum can carve out a variety of patterns, then combined with some creative ideas, plus gypsum can be dyed into a variety of different colors, then the effect it presents is certainly no less than fine decoration, cost-effective.

Disadvantages: It is not waterproof, if the upstairs shelter family leaks, then Hongqin will erode the gypsum board of their own home, which will affect the service life of the gypsum board, easy to cause falling off, deformation, which will bring great inconvenience to life, so that there are potential safety hazards.