Do I need to buy a new one if the toilet angle valve is broken?

You'll need an angle valve (about 30 yuan, good ones are more expensive), a roll of raw meal belt (3 yuan), and a medium-sized wrench.

Wrap the raw meal around the screw nozzle of the angle valve slightly thicker (to prevent water leakage). Close the water valve of the toilet, remove the angle valve, and see that your connecting hose has rusted from the **, it is recommended to replace it with a new one. After removing it, press the angle valve with the raw material belt and tighten it with a wrench, and connect the hose to it.

If you go outside to find workers, people have to ask for 50 yuan in wages, it's not worth it, it's better to get it yourself, materials and hardware stores have sold them.

If you don't understand, you can ask, hope.

Yes. Here's how to replace it:

1. Usually the inlet angle valve is installed on the wall with a height of 200mm from the ground on the side of the toilet. For this type of high-back toilet, the angle valve is installed on the back of the toilet and is blocked by the toilet after installation.

2. In order to facilitate maintenance, manufacturers generally have maintenance holes in the lower part of the toilet in consideration of these reasons during production.

During maintenance, you can enter the internal switch water inlet angle valve from the maintenance hole, or open the water tank cover from the upper part of the water tank for maintenance, or move the whole set of products away for maintenance.

The main use of the toilet angle valve is to control the water pressure under the condition of unstable water pressure or excessive water pressure, to prevent the water parts in the toilet from bursting due to excessive water pressure, and the failure of the sealing ring to cause leakage, but also to facilitate future maintenance and replacement of hoses, although most of the angle valves are rarely used after installation, but there is better than nothing.

The toilet needs an angle valve, mainly for the water pipe, whether it is a toilet or a squatting toilet, the water tank needs to be connected to the angle valve, and the angle valve next to the toilet is slightly special, you need to buy a check valve, so that the water flow can be controlled, and it will be more convenient to flush the toilet bowl after use.

Yes, but if you are worried about the poor quality, you can buy the brand angle valve separately.

The angle valve used in the ordinary toilet is not the same as the automatic toilet, my previous single outlet angle valve was also removed by the master, the automatic toilet manufacturer will come with a two-way angle valve, because this angle valve should have the function of filtering water, and it is a double water channel, the fuselage comes with another layer of filtration and check valve, buttock washing, women's washing is more friendly.

Controlled water flow, explosion-proof.

The toilet must be equipped with an angle valve hose to install, if you buy online, you can negotiate with customer service to send an angle valve hose; If you buy a smart toilet, in addition to the angle valve hose, you should also reserve a socket (the toilet needs to reserve a place to plug in the seat includes: bathroom cabinet side hair dryer, smart toilet, washing machine, electric water heater, if you want to install an electric towel rack, you may reserve an outlet).

Two washbasin faucets, two vegetable basin faucets, it is recommended to choose one with hot and cold logos, good distinction, two water heaters, it is best to buy them in advance, they are all unified national standard sizes, water heater installation is not sent, there is no installation site and you also need to buy it with the master, it is better to choose one in advance.

The angle valve of the toilet bowl needs one, and you must choose one with a check valve to prevent the water from the toilet from pouring back into the pipeline.

The angle valve should be made of pure copper, which is pressure-resistant, explosion-proof, and rusty.

Choose ceramic spool, resistant to high and low temperatures, no corrosion.

Inferior angle valves are easy to rust and break after being used for a long time, which brings potential safety hazards to the air distribution at home.

Try to choose a big brand, with high quality and warranty.

Dear, hello, I'm glad to solve the problem for you, the toilet block angle valve can't be installed, how to deal with it, is the three poor solutions: the first is to replace the angle valve and replace the straight handle with a rotary valve, which is conducive to the operation to save space and the lowest cost. The second is to move the position of the toilet by installing a drainage elbow, the disadvantage is that the construction is complicated, and it will also increase the gap between the toilet and the wall to affect the appearance.

The third is to screw the angle valve interface down to the hose, if you can't connect the hose, only remove the angle valve as much as possible, the construction is not difficult to maintain in the future, and it is the best way to lack the skin.