How to water the tea table without a faucet? The tea table water boiler does not serve water

There is no faucet, and the method of filling the tea table with water is directly to fill it with hot water, and then give the tea table directly to the water. In this way, the tea table can be filled with water.

If there is no faucet, how can the tea table be filled with water, and then we can take down the kettle on the tea table and pour this pure water into it. Then take the kettle to the base and heat it up.

If you don't have a tea table with a faucet, you can also use an elevator or a transfer window to transfer him over, otherwise, it will be very troublesome to get water back and forth.

There is no choice but to connect another hose or re-put the tube.

You can add one. Or buy a self-filling kettle.

If you don't have a faucet tea table and want to serve water, there may also be some elevator type that will pass the brewed tea to you through the transfer window.

Connections are possible. Automatic water pipe: Prepare the water pipe, then measure the approximate distance from the water boiler to the bottom of the pure water bucket, leave it about 15cm long, and then connect the water pipe to the small round hole at the bottom of the water boiler.

Through the pressure of the water, the current tea bar machine is automatically watered, which is very convenient.

The tea table without the faucet device, in general, can not be in a good water condition, and it will also play a bad role and influence on the cooking of the whole tea art, so the tea table must be designed according to the needs to achieve a more ideal use effect.

If you don't have a faucet, you can pour it directly by manually filling the water, which is more convenient and practical, and I wish you health and happiness.

How to water the tea table without a faucet? You look like there is no faucet tea table, but it has its function, its function is very good, now the development is very advanced, such a faucet is very popular with him, he can press the button on the water, such is a favorite of people everyone likes such a faucet.

There are probably two or three reasons for not using water: water pressure at the water source, clogged filter screen, and air barrier in the cavity. First disassemble the water inlet connector of the water heater and check whether the filter is blocked.

Hello! The pipe of direct drinking water is generally 2 points, and it is connected to the tea table to see if the interface corresponds.

Hello, dear, I am happy to answer for you: the tea table water boiler is not on the water Answer: dear, there are several possible reasons:

1. It may be that the solenoid valve is damaged, the power can be cut off, the chassis can be disassembled, and the temperature resistance and power are checked to see if the temperature resistance and power are normal. 2. It may be that the pump is damaged, remove the electric brother on the old pump, reconnect the new pump, and insert it into the motherboard. 3. It may be that the power supply of the teapot is not in good contact, it is recommended to detect whether the power supply or plug is damaged, and in addition, the damage of the smart lead button will also lead to not being able to use the water in Huaichenqin.

Precautions: When the automatic teapot is used, it should not be boiled without water, and the water should not exceed the maximum water level to avoid overflow and leakage. In addition, it should be cleaned every time it is used to prevent limescale accumulation and prolong the life of the kettle.

Summary. Hello dear, glad to answer for you! <>

The possible reasons are as follows: 1. It may be that the solenoid valve is damaged, the power can be cut off, the chassis can be disassembled, and the temperature resistance and power are normal. 2. It may be that the pump is damaged, remove the wires on the old pump, reconnect the new pump, and insert it into the motherboard.

3. It may be that the power supply of the teapot is not in good contact, it is recommended to detect whether the power supply or plug is damaged, and the damage of the smart button will also lead to no water.

The tea table water boiler does not serve water

Hello dear, glad to answer for you! <>

The possible reasons are as follows: 1. It may be that the solenoid valve is damaged, the power can be cut off, the chassis can be disassembled, and the temperature resistance and power are normal. 2. It may be that the pump is damaged, remove the wire on the old pump, reconnect the new pump, and insert it into the motherboard to leak.

3. It may be that the power supply of the teapot is not in good contact, it is recommended to detect whether the power supply or plug is damaged, and the damage of the smart button will also block the code and cause no water.

Kiss <>

Related Extension Rental Friends Exhibition:1It may be caused by the aging of the circuit, and it is recommended to replace the circuit. 2.It may be that there are many foreign objects or limescale in the internal filter or inlet and outlet of the tea bar machine, which blocks the tea bar machine and needs to be cleaned. <>

<>3.It may be that the interface of the open water pipe on the tea bar machine is broken or loose, check the specific reason, and connect the water pipe. 4.It may be that the pumping motor of the tea bar machine is burned out, and the new pumping motor is Menghuaike.