How to make simple lanterns by hand, simple lantern making process by hand

First of all, prepare red cardboard, yellow cardboard and double-sided tape, the two corners of the square cardboard opposite each other are glued together with double-sided tape, a total of 8 such shapes are made, glued on the rectangular cardboard, the left and right sides of the rectangular cardboard are glued with double-sided tape, and then glued with handles and patterns to make yellow tassels, and the simple and good-looking lanterns are done.

Handmade lantern making tutorial.

1. First of all, prepare a large red cardboard and 8 pieces of cardboard cut into squares, as well as a roll of double-sided tape.

2. Glue the two opposite corners of the square cardboard with double-sided tape to make a total of 8 such shapes.

3. Then use double-sided tape to glue on the top of the rectangular cardboard, glue the yellow paper strip on it, and glue the 8 shapes side by side on the rectangular cardboard with double-sided tape.

4. The left and right sides of the rectangular cardboard are glued with double-sided tape, and then a red strip of paper is taken, and the two ends are glued to the yellow end to make a handle.

5. Take another piece of yellow cardboard with the same length as the rectangular cardboard, and cut it into spikes with scissors.

6. The yellow tassels are glued to the bottom of the lantern with double-sided tape, and then a red strip of paper is glued on top, and the simple and good-looking lantern is ready.

How to make it: In the first step, the lantern advertisement makes a skeleton. The relatively simple shape of a paper lantern is a cube or cylinder, and it is best to use bamboo branches or bamboo bark that can be bent to form a frame, and tie the joints with thin wires.

If you can't find it, you can also use slender strips of cardboard and bamboo skewers for barbecue, which will lack firmness and flexibility, but they are also very good decoration for the interior.

The second step is to make the lamp body. Buy a few pieces of white or red ordinary rice paper or sprinkle gold rice paper at the Four Treasures of the Study, cut them to the length and width of the lantern skeleton, and then you can design your own patterns. Calligraphy, painting, and paper-cutting can all be displayed on a small lantern.

After pasting, you can also use narrow strips of imitation silk paper to edge up and down, which looks more elegant, much like an ancient palace lamp. If you are not very good at calligraphy and painting, there is a simple way to refer to it. Use a piece of tissue paper to trace the desired character on the notebook, then overlap the tissue paper with crimson rice paper, and use a single-edged blade to dig out the handwriting.

When the tissue paper is removed, hollowed-out handwriting appears on the red rice paper. The body of the lamp is made of white rice paper, and the red rice paper is pasted inside, and the candlelight or light is reflected from the hollow, and the effect is quite beautiful.

The third step is to make a light source. If you put it indoors, you only need to light a regular candle in a lantern; If you want to carry it out, it's best to make a simple circuit with a light bulb and a battery. It may look a little rough, but lighting your own handmade lantern during the Lantern Festival will definitely have a different flavor.

Function. It is generally hung in front of the store at night, and the lantern is written to indicate the commercial nature of the business, which plays the role of signboard advertising and hanging banner advertising.

Prepare materials: red paper, yellow drawing paper, safety scissors, stapler, white latex.

Step 1: First fold the red paper horizontally in half, and use safety scissors to cut the red paper at an equal distance from the folding, as shown in the figure below.

Step 2: Fold a small part of the yellow paper horizontally and tear it off, roll up the remaining paper along the long side, and fix the opening with a stapler, as shown in the figure below.

Step 3: Then coat the two long sides of the cut red paper with white latex, and roll them up around the yellow straight tube as shown in the figure below, as shown in the figure below.

Step 4, finally paste a slender red paper strip to make a lantern handle, and the handbag should be made into a rectangle, as shown in the figure below, and the simple lantern will be made here.

The above is about the simple process of making handmade lanterns, I hope it can help you.

The steps to make a simple lantern are as follows:

Prepare materials for key materials: 2 disposable tissue paper cups, 1 safety scissors, 1 ballpoint pen, 1 white latex or glue stick, 1 red hair root, and several watercolor pens.

Steps:1Divide the paper cup into strips evenly around the cup and give it a pointed shape.

2.Then cut off the bottom of the prepared other disposable cup calendar beam, and then paste the bottom part with double-sided tape to the sharp corner direction of the picture above.

3.Then cut the area around the cup with the bottom cut off.

4.Cut out a circle of disposable paper cups and glue them to the lantern with double-sided tape.

5.Drill holes at the top.

6.String the thread prepared in advance, and you're done, and you're done, and the handmade lanterns from disposable paper cups are all done!

Chinese lanterns, also known as limb transport lanterns, are an ancient traditional handicraft of the Han nationality. After thousands of years of development, lanterns have developed different regional styles, each with a unique artistic expression. Every year around the Lantern Festival on the 15th day of the first lunar month, people hang red lanterns symbolizing the meaning of reunion to create a festive atmosphere.

The steps to make a simple handmade lantern are as follows:Prepare materials: 14 sheets of red square colored paper, solid glue, scissors, red thread.

Production steps: 1. First prepare 14 pieces of red square colored paper.

2. Take one sheet and fold it twice diagonally.

3. Fold symmetrically along the sharp corners on both sides of the folded line.

4. Fold up and down on both sides.

5. Then fold the whole in half.

6. Fold both sides inward twice.

7. Tuck the two corners of one side into the other.

8. Fold another 11 pieces in the same way.

9. Glue 11 together with solid glue.

10. Leave one.

11. Take a square piece of colored paper.

12. Cut out thin strips with scissors.

13. Roll up the paper and paste it.

14. Glue yellow paper and red thread on the top.

15. Stick one on one side of the red line.

16. Put the red line in the lantern.

17. Paste the last piece of origami.

18. The beautiful handmade lantern is complete!

The simple tutorial for making a lantern by hand is as follows:

Blue A4 paper, fold in half twice along the center line of the short side, and fold in half on both sides after the second time.

2.Divide the origami into 8 equal portions and fold the creases from 1 edge to a rectangular origami strip.

3.From the short side of one side of the rectangular origami strip to the other side, fold the paper front and back into a corrugated origami.

4.Ripple shape origami, fold another 21*28cm blue A4 paper in the same way to form a corrugated origami.

5.The glue gun glues on the short side of the corrugated origami paper on one side and sticks it to another corrugated origami, and then lowers the other two ends of the origami paper with a Qingbend glue gun to glue and glue together, forming a cylindrical shape in front of the ridge.

6.The cylindrical origami is folded forward and backward along the ripple creases to form a blue toroid.

7.Take 2 pieces of 15cm round cardboard, seal one of them on the white paper, put a 9cm round paper mold on the surface of the white paper, draw a circle along the edge and cut off the 9cm circle in the center to form a ring.

After gluing the edge of the cardboard with a glue gun, the blue ring paper is glued to the 15cm round cardboard as the bottom of the lantern.

9.After poking 2 holes in the circular cardboard with a bamboo skewer, the glue gun glues the blue circular paper, and the two are glued together.

10.The white string is tied separately after passing through the holes, and the corrugated lantern body is stretched, and a lantern is ready.

Preparation: 1 piece of red and 1 yellow piece of drawing paper, 1 pair of safety scissors, 1 stapler, 1 white latex or glue stick, and 1 red hair root.

1. Fold the red paper horizontally in half, and use safety scissors to cut the red paper from the folded place at an equal distance.

2. Fold a small part of the yellow paper horizontally and tear it off, roll up the remaining paper along the long side, and fix the opening with a stapler for teachers or parents. In order to make it easier for young children to operate, the stapler at this step can also be replaced with white latex or glue sticks.

3. Coat the two long sides of the cut red paper with white latex, and roll them up around the yellow straight tube as shown in the figure below.

4. Paste slender red paper strips to make lantern handles, and the colored paper lanterns are completed.

Tools: red envelope, stapler, glue, red thick line, red thin line, needle, pencil, ruler.

The practice of round lanterns.

1. Prepare a red envelope, red needle and thread, and 1 red rectangular piece of paper. (If there is no red envelope, you can use red cardboard instead).

2. Use scissors to cut out red packets, the width of each one should be the same, and then pick up the vertical strips with patterns on both sides and throw them away, leaving a total of 12 vertical strips for later use.

3. Cut out the red rectangular paper with a vertical bar like the picture below, pay attention to the top not to cut it, and then roll up the cut rectangle, and the ear head is ready.

4. Thread the tassel head with red thread, and then tie a knot at the top of about 4 cm to fix the lantern strip.

5. Thread the 12 lantern strips in turn (with the patterned side facing up) and tie a knot at the top.

6. After that, use the red thread to thread the lantern strips in turn and press them into a semicircle, and then tie a knot on the top to fix them.

7. Finally, wear the remaining red thread from the top lantern strip, leave about 10 cm of hanging wire on the lantern, tie it and fix it and cut off the excess length, and the round lantern is ready.

The practice of angular lanterns.

1. Prepare 10 red envelopes, 2 thick red strings and some thin red threads.

2. Fold down the opening of one of the red envelopes, then fold the top and bottom edges in half along the center line to the left and right to fold out the center point, and the left and right sides also fold out the center point.

3. Fold the lower right corner up along the center point of the bottom edge and the center point of the right edge.

4. The other 3 sides are also folded to become the following picture.

5. Fold the remaining 9 red envelopes according to the above method. Eliminate the Travel.

6. Staple the connection of 5 red packets with a stapler.

7. The other 5 red envelopes were also ordered together.

8. After stacking the two five-star red envelopes on top of each other, use a stapler to staple the junction of the morning stove on each side.

9. Pierce 2 eyes on one of the red envelopes, and thread one of the thick red lines into the eyes to fix it.

10. Cut out 30 thin red threads (10 cm in length), and then wrap the head around the red thread.

11. Sew another thick red rope in the middle of the head of the ear with a needle and thread.

12. Finally, nail the head of the stool with a stapler to the red envelope with a line of red rope on it, and the pentagonal lantern is ready.

The simple and beautiful handmade lanterns are as follows:

Materials required: utility knife, cardboard, adhesive tape.

1. Take a square piece of pink cardboard, as shown in the figure below

2. Cut into two rectangular paulownia eyes, one large and one small, as shown in the figure below

3. Fold the left and right sides of the large rectangle inward, and then fold it in half, as shown in the figure below

4. Use the difference wheel excitation scissors to cut out the appearance of the lantern, as shown in the following figure:

5. Paste double-sided tape on both sides of the small rectangle, as shown in the figure below

6. Glue the part of the large rectangle folded inward, as shown in the figure below

7. Take a piece of blue paper and cut it into two long strips for decoration, as shown in the figure below

8. In this way, the handmade lantern is done, as shown in the figure below