Will tripping with a bang when connecting to electricity have an impact on the appliance?

Updated on Car 2024-07-02
11 answers
  1. Anonymous users2024-02-12

    When connecting the electricity, it accidentally short-circuited, resulting in empty opening tripping, which will not have much impact on household appliances under normal circumstances, but pay attention to the following points:

    1.Before the cause of the trip is found out and the potential safety hazard is eliminated, the power cannot be transmitted again.

    2.If household appliances such as refrigerators, air conditioners, and computers are in working condition before tripping, after tripping, wait 3-5 minutes before sending power on the premise that there is no potential safety hazard.

  2. Anonymous users2024-02-11

    Does Bang Travel Affect Home Appliances? When the power is turned on, the air switch is turned off due to carelessness, which generally does not have much impact on household appliances. However, the following points should be noted:

    1.Power cannot be retransmitted until the cause of the trip has been determined and the potential safety risk has been eliminated. 2.

    If household appliances such as refrigerators, air conditioners, and computers are in working condition before tripping, after tripping, you need to wait 3-5 minutes for power transmission if there is no potential safety hazard.

  3. Anonymous users2024-02-10

    There should be no impact, because tripping means that your home circuit may have some problems to a greater or lesser extent, and you can overhaul it to see if it is tripped or what is the reason.

  4. Anonymous users2024-02-09

    This basically has no impact on household appliances, and the meter has played a protective role when it trips, and if the household appliances are affected, it can only mean that the meter is unqualified.

  5. Anonymous users2024-02-08

    From what you said, it should be the aging of the wire, which causes the wire to be grounded, and then the leakage protector of the switch trips, and it is recommended that you check the line.

  6. Anonymous users2024-02-07

    Your house is an old house, from what you said, it should be the aging of the line, resulting in the grounding of the wire, and then open the leakage protector tripping, it is recommended that you check the line, the method is that you find an electrician to let him check the line room by room, to see what is the problem, and then hurry up to repair it, in the long run, it will burn out more lines.

  7. Anonymous users2024-02-06

    On rainy days, the wires are short-circuited due to water due to rainwater flowing into the wall, which is a soft short circuit, not a hard short circuit between wires.

    Road, in the process of short-circuit fire, may be the joint part of the line of the tape or wire skin scorched or carbonized, the zero line and the live wire has been in a virtual state, so from time to time there will be a short circuit, ignition, tripping phenomenon, such a fault is the most dangerous, easy to cause fire, should be repaired or replaced in time.

  8. Anonymous users2024-02-05

    If there is a hidden danger of short circuit, take measures as soon as possible to avoid accidents.

  9. Anonymous users2024-02-04

    It could be that the balcony is leaking water and leaking into the balcony lights causing a short circuit, and you call an electrician to check it.

    The sparkling switch is replaced first.

  10. Anonymous users2024-02-03

    The socket trips as soon as the electricity is used, and the strange electrician wiring is like this, and it is strange that there is no leakage, which is really a low-level mistake.

  11. Anonymous users2024-02-02

    Don't rush to push the switch, but cut off the power supply to all household appliances in the room. The simple way is to unplug all the power supplies with the latches from the socket panel, including electrical appliances such as the power strips, and turn off all the light switches at the same time, and then wait for the maintenance personnel to come to the door.

    If there is no electrical equipment on the line and it also trips, it may be that there is a problem with the line or there is a problem with the "empty opening", and you have to ask a professional electrician to help solve it. The "empty open" at home did not jump, it was the "empty open" in front of the meter, which was tripped, closed and transmitted, and could be used normally, and then said next time there was a situation.

Related questions
13 answers2024-07-02

Hello, there will be a sound when the gas stove is turned off, you can turn off the gas slowly, don't turn off the gas all at once, because the gas burns a big fire, and if you put out the fire all of a sudden, there will be a sound. Sometimes there is a situation when you turn on the gas, because the gas is turned on too much, and when you want to turn it off with a bang, it may be turned off too quickly, and there will be such a sound.

7 answers2024-07-02

Writing ideas: The idea should be profound, and the profundity of the idea means that the established theme is not a superficial truth that people know, but to see the essence through the phenomenon and dig out the deeper meaning. The idea is to skillfully express more profound thoughts in the limited text of the study, so that we can only see the world in a grain of sand, and reproduce the whole picture of life from a little bit and a branch and leaf in life. >>>More

7 answers2024-07-02

The trip is likely to be a short circuit in the circuit, and it is recommended to check the circuit. >>>More

12 answers2024-07-02

Pinyin: zhī fáng, lipid is a sound, "triglycerides."

The "ester" is pronounced in three tones. >>>More

10 answers2024-07-02

Merritt excavator repair factory, Master Li analyzed.

There is an abnormal sound in the rotation, mainly to observe whether there is a sound in the continuous rotation of the whole circle or only when the rotation starts or stops, generally if there is a sound in a certain position when the whole circle of rotation is in a certain position, it is necessary to consider whether the pinion and the large gear ring are not broken teeth, if there is a sound when starting or stopping, it is generally not a problem, mainly the gap between the pinion and the ring gear of the modern excavator is a little large, the modern pilot operating system does not have a buffer device, and the impact force of starting and stopping is relatively large, Therefore, if there is a sound, the sound can be reduced by operation, and of course, it is also necessary to consider whether the connecting bolts between the slewing reducer and the upper frame are loose. >>>More