Do you want to soak the newly bought purple sand cup with good tea leaves, that is, how long does it

Traditional methods of operation:

Separate the pot from the lid and place it in a clean container filled with water, the container should be large enough to cover the entire pot with water.

Put some tea leaves in the container at the same time (the tea leaves you want to use this pot to brew) and boil slowly over low heat, taking care to prevent the pot from hitting the lid or the wall of the container and causing damage.

Cook slowly for about 1 hour, remove the heat, let the pot still sit in a water-covered container, let it cool slowly, and let it sit for 1 day.

The next day, take out the pot, pour out the sediment left in the pot, and carefully pour water over the pot to wash. Repeat steps 1-3 above once.

The next day, take out the pot and carefully rinse it with hot water. After this treatment, the air holes in the pot are all open and ready for use.

Easy way to deal with it:

Fill the pot with freshly boiled water and let it sit for 5-10 minutes.

Fill the pot again with freshly boiled water, add 1 teaspoon and leave the tea leaves for 5-10 minutes. Pour the water from the jug.

Now it's time to start using the new teapot.

This problem depends on the *** of the purple sand cup you bought, if the quality is poor, there is no need to raise. If you are sure to use good tea leaves to make tea, and it is best to make a kind of tea, how long to brew depends on how much tea you usually drink, to a certain extent, even if you don't put tea, there is naturally the taste of fragrant tea, then raise a good cup. It's a long-term process.

If you want to raise a pot or cup, you must pay attention to using a kind of tea.

First of all, to open the pot, that is, to scald the cup with hot water, and use the tea leaves to be drunk regularly for a day and a night, or boil for two to three hours.

In this way, this cup should not be washed in cold water, of course, this should be based on the fact that your cup is a good purple sand cup, if not, it is not necessary.

Use the tea you have drunk, or low-grade tea, and brew it repeatedly for a few days before using it.

Zisha teacups can't be sold, and basically no one makes them with good mud, all of which are low-grade mud materials that cost a few yuan a pound. Therefore, it is more reassuring to have more bubbles.

In the case of purple sand cups, there is no need to be so particular, as long as you buy it and wash it, at most grab the tea leaves and put them in the cup, and boil them in hot water at high temperature.

<>1, open the cup: the newly bought purple sand cup, before using the cup must be opened, you can use the scalding method, that is, the use of hot water to pour the new purple sand cup to open the cup, or use the boiling tea method to open the new purple sand cup, the new purple sand cup is placed in a pot without oil, and then add an appropriate amount of tea, warm boil for 15-20 minutes, open the new purple sand cup, you can remove the miscellaneous smell of the new purple sand cup, and you can also dredge the pores of the purple sand cup, killing two birds with one stone.

2. How to use: After the completion of the new purple sand cup, you can use it, when you use the new purple sand cup, you must pay attention to the correct tea making method, different tea brewing skills and methods, you can follow the correct method, let the new purple sand cup naturally absorb the nutritious tea soup, so that the new purple sand cup can be better maintained in the future, and the pulp effect is more perfect.

1. The newly bought purple clay cup first needs to be disposed of with a soft brush and cleaned with water.

2. After that, put the purple clay cup into a small pot, add cold water to boil, then add an appropriate amount of tea, boil for about 20 minutes, then turn off the heat, take out the purple clay pot, wipe off the excess water with a brush, and dry it, and finally clean it with water to use.

1. The newly bought purple sand cup first needs to be disposed of with a soft brush and cleaned Jingzhaoqiao with clean water.

2. After that, put the purple sand cup into a small pot, add cold water to boil, then add an appropriate amount of tea, boil for about 20 minutes, turn off the heat after the brightness, take out the purple sand pot, wipe off the excess water with a brush, and dry it, and finally clean it with Qingchai brother water to use.

The purple mountain locust clay pot needs to be boiled before use. This is because the last process of the purple sand pot is fired from the kiln, and there will be some substances placed when the purple sand pot is fired (such as: aluminum powder) and small particles of purple sand pot, etc., as well as a little fishy smell of earth, which must be used after the pot is opened.

In addition, daily use also needs to be boiled first, because purple sand has adsorption, there will be tea rust, stains, etc. accumulated inside and outside the teapot after use, and a pot to brew different tea leaves will cross the flavor and affect the taste, so it is also necessary to clean the purple sand pot. It's too late.

1. The purple sand cup is especially suitable for brewing oolong tea, especially those oolong raw tea, which can better show his tea rhyme after brewing with the purple sand cup, and can brew excellent tea soup with full fragrance, which can make people taste the unique taste of oolong tea.

2. The purple sand cup is also suitable for brewing Pu'er tea or black tea, these teas are ripe tea that has been fermented and processed, brewing with the purple sand cup can make the brewed tea soup taste more attractive, and can also make the tea soup more mellow and attractive after brewing, which will make the unique charm of tea be best displayed.

Hello. Use a purple clay pot.

Here's how to make tea.

Before using a purple clay pot, be sure to think about what kind of tea the pot is used for. As the saying goes, "one pot is nothing, two teas" is this truth. For example, in the southern Fujian region.

People are accustomed to using purple clay pots to soak Tieguanyin.

When using the new purple clay pot, you must use a clean pot to submerge the pot, boil the pot over low heat, and put the tea leaves into the pot at the same time. After boiling, remove the tea residue, and then wait a little longer to take out the new pot, put it in a dry and odorless place, and dry it with natural shade before use. With tea soup.

The main purpose of blanching is to remove the new smell of tobacco and wash and decontaminate.

For the reuse of the old pot, it should be done that after each tea brew, the tea residue should be poured out and the residual soup should be washed with hot water to keep the purple clay pot clean and hygienic. However, some people often only remove the tea residue after brewing, and ignore the tea soup in the pot, which accumulates tea over time. It is what people say "tea mountain in the pot", so that the pot is prone to peculiar smells.

This is the reason why boiling water should be blanched before soaking, and it is also to remove dirt.

For the inside of the pot, whether it is a new pot or an old pot, it is never advisable to store the tea residue in the pot to raise the pot. On the one hand, the tea residue stuffy in the pot is easy to produce a sour and rancid smell, which is harmful to the pot, on the other hand, the purple clay pot can absorb the hot tea flavor, so the residual taste is not beneficial to the purple clay pot.

For the outside of the pot, often wipe the surface of the pot, feel comfortable for a long time, glow the natural luster of the purple sand pottery itself, simple and elegant, and more intriguing. In addition, you can scrub the surface of the pot by hand, and then use a clean muslin cloth or other softer cloth to wipe it after washing, and then put it in a dry, ventilated and odorless place to dry, over time, you will naturally have a deeper relationship with this pot.

The purple clay pot generally uses six cups to make tea. Since we have a large number of valet customers, we can increase them appropriately. This depends on the number of people, and you can choose the number of cups.

Absolutely.

1. Thoroughly wash the inside and outside of the pot. Whether it is a new pot or an old pot, remove the wax, oil, dirt, and tea dirt on the body of the pot before raising.

2. Do not get oily. The purple clay pot is the most resistant to oil stains, and it must be cleaned immediately after dipping, otherwise the soil tire will not be able to absorb the tea, leaving all the oil marks.

3. Make real tea. The more times the tea is brewed, the more tea juice the pot absorbs, and the soil tire absorbs to a certain extent, and it will penetrate the surface of the pot to emit a moist and jade-like light.

4. Wipe and brush moderately. After the tea juice is poured on the surface of the pot, use a small brush with soft bristles to brush the tea pins in the pot, rinse it with boiling water, and then use a clean tea towel to wipe it slightly, and do not keep pushing and rubbing.

5. Clean up and dry after use. After brewing the tea, the tea residue should be removed to avoid peculiar smell, and it needs to be reorganized.

6. Let the pot have time to rest. After brewing for a period of time, the teapot needs to rest, so that the soil tire can be dried naturally and thoroughly, and it can be more absorbed when it is used again.

According to these six steps to raise the bright pot, although the speed of cultivation is slow, but the brightness can last, and it is not afraid of human hand touch.

Yes, generally the newly bought purple sand teapot must be processed first, that is, the pot is opened:

There are many ways to boil a pot, and here is one.

1. Boil in plain water for at least an hour. The specific method is to separate the lid from the body of the pot, put it in a pot of cold water, place the pot on the stove, and slowly heat it to a boil over a low fire. Turn off the heat after 1 hour. In this step, the pores of the pot body can release the earthy flavor and impurities contained in the pot through thermal expansion and contraction.

2. Put the boiled pot in white water and a piece of old tofu into clean water to boil in the same way as above, at least one hour. This step is called de-ignition and is designed to remove the heat from the high-temperature calcination during pot making.

3. Put the pot above and a piece of tender sugarcane head into clean water to boil, the method is the same as above. At least an hour.

4. Put the pot above and the tea leaves into clean water to boil, the method is the same as above, at least one hour.

After completing the above four steps, the purple clay pot can officially start to use.