The small pot can now accept a few Taiah, who knows

After the small pot changed the left-handed to left-handed and left-handed in August, it has not been upgraded, and if your high-frequency head is not adjusted, it should now be able to receive 16 units, and these 16 units are all left-handed signals. If the high-frequency head is adjusted, it can rotate left and right, and the collection is almost the same as before, but there is less Shanghai, Jiangsu and Shandong. According to the current trend, radio and television should no longer be poor and tossed, no matter how much they toss, they will use the brush machine and adjust the high-frequency head to deal with it, maybe he himself will find it boring.

Remove the polarized piece from the pot head.

Then the automatic collection will do it.

The small pot is still being upgraded, and now you can watch up to 30 sets of programs, or the set-top box does not need to be upgraded.

Because as long as the small pot is upgraded once, it will have to be upgraded again and again.

Under normal circumstances, I tried to fix the elevation angle in the place I bought, and then I got it back, and the main thing to come back was to adjust the direction of the satellite, not to adjust the elevation angle, and the satellite position was mostly due south and west. In general, the signal strength is above 60, so you don't need to adjust it very much, and the most important thing is to adjust the signal quality.

Put the small pot on the house, the small pot receiver is moved slowly due south and west, generally it is best to cooperate with 2 people, one on the top to move the small pot, and the other on the bottom to watch the quality of the TV signal. I believe it will be done in a while. Be slow and patient, because the quality of its signal is easy to change with a slight movement, and it is best to adjust the quality to more than 60, so that you can receive about 40 TV stations.

It was done in half an hour and 41 units were received.

First of all, the place where the pot is placed should be free of obstacles to block the receiving signal.

1. Slowly turn to the small pot first, observe whether it breaks through 0, if it still does not move 0, then change to the following 2, adjust the elevation angle to obtain the signal quality, and gently adjust it up and down under the slight loosening of the screw behind it. Be careful, generally do not need to move too much, if the signal quality has not been up, to check.

1. Whether the polarization direction of the high-frequency head is correct, ensure that the 0 scale is directly above, and its elevation angle should be kept at a general angle of 15 degrees after the vertical deviation.

3. The horizontal direction should be kept at about 43 degrees west-south.

The signal of that thing is not good at all,You still use satellite TV,At most, there are only two or three,It's usually your station in that province and city,It is recommended that you still go on digital TV,You are like the small pot I used to use at home,You can receive Jilin TV,Hehe,I hope to adopt!

Depending on which satellite you receive, if you collect it all, you have to prepare a large cauldron, or multiple small pots. Hong Kong, Taiwan, Europe, America, Southeast Asia, Japan, South Korea, many stations can receive, domestic Zhongjiu, 138

Possible reasons why there are only 33 sets of small pots:

The parameters of the Zhongxing-9 satellite have been modified, and some programs have been encrypted and transmitted, resulting in the set-top box programs not being able to be watched.

How to install the set-top box of Household Pass:

1. Assemble the antenna and install the high-frequency head: install and connect the antenna and the high-frequency head according to the manual.

2. Cable: Connect the cable on the set-top box with the cable on the TV.

Connect one end of the audio cable and the audio cable (red and white), cable (yellow) to the right channel, left channel, and ** (red, white, yellow) ports of the set-top box, and insert the other end into the audio input port of the TV using the same method.

3. Adjust the antenna elevation angle and azimuth angle

Elevation angle: If the scale on the antenna has been corrected, the queried angle is used;

Azimuth: due south to west.

The north is about south-west, and the elevation angle is degrees.

The south is about 75 degrees west, and the elevation angle is degrees.

4. Press the "Menu" button of the set-top box remote control to enter the next menu of system settings, find the program search, select automatic search, click OK, and wait for the search to complete to watch TV programs normally.

5. If it is a third-generation Zhongxing 9 machine, it also needs to be located to open the card before it can be used.

Set parameters: 1. Press the "Menu" button on the remote control to enter the "Main Menu" interface and select "System Settings";

2. Enter the password "9999";

In the "System Settings" interface, select "Installation & Signal Detection" (selected by default), and press the "Confirm" button of the remote control twice. Stand behind the satellite dish and slowly turn the front of the satellite dish from due south to the direction of the satellite.

Moving (it is recommended to turn slower than the speed of the second hand of the watch). During the rotation process, always keep an eye on the TV satellite receiver debugging interface, the "signal strength" and "signal quality" change indication signal turns green.

When the action is stopped, it means that the satellite has been preliminarily identified and the satellite signal has been locked;

4. Network connection settings. IP settings: , port settings: 4567 or 04567;

5. The area code is set to the first six digits of the local ID number;

6. Turn off the power of the set-top box, insert the mobile ** card and smart card, and then turn it on;

7. Select "Base Station Information" in the system settings and press Confirm;

9. Wait for the base station information to pop up, and the scanned base station information appears on the TV, click the orange button "Store Confirmation";

11. Later, the information box will automatically pop up to prompt "Sent successfully", after exiting the menu, the upper right corner of the screen will prompt "During installation, please wait...."After 2-3 minutes, the screen will automatically pop up "Installation successful", if this message pops up, please wait patiently for about 10 minutes;

On the evening of August 10th, the middle nine was upgraded again, the pid remained unchanged but changed to the right-handed 1 to modify the bin of the pid. 2 Without factory reset, you can proceed to the next operation without automatic search. 3 If the factory settings are restored, the PID may be restored to the factory.

See if there is a problem with the polarization method, there is a polarization chip in the high-frequency head, adjust the left-handed and right-handed ones, adjust it.