How to install tiles on the bathroom wall? What are the precautions?

The choice of bathroom floor tiles must first meet the need for non-slip. The toilet is not only the function of going to the toilet, but also the function of bathing, and taking a bath will splash a lot of water, so it is very important that the tiles are non-slip. When choosing bathroom floor tiles, it is best to choose matte tiles or bricks with uneven surfaces, such bricks can increase the contact area between the soles of the feet and the ground, increase friction, and have a good anti-slip effect.

When buying, we should also understand whether the tile glaze is sufficient, the glaze can effectively isolate water vapor from invading the inside of the tile, so you can scratch the tile surface with keys and other hard objects, if there are scratches that are not up to standard.

Density is an important factor in measuring the quality of ceramic tiles. When choosing tiles, it is better to choose tiles with high density. This type of tile has a long service life and is not easily damaged.

When buying, you can touch the side of the tile with your hands. In general, tiles with high density feel very series; We can also see if the sides of the tile are flat and if there are pores of uneven size. If there are no unevenly sized pores, the tile will be better.

You should be on site, otherwise the workers won't waste too many tiles. If you don't stick tiles on site, it's easy to run into irresponsible plasterers and you'll waste a lot of tiles.

It is suggested that some imperfect tiles can be pasted in some invisible positions by workers in the future, such as washstands, cabinets, mirrors, etc., and be careful not to paste tiles and waist tiles in the above positions of workers, otherwise you will not be able to see anything in the future and waste money. Before tiling, the rougher the wall, the better, which can increase the contact force area between the cement and the wall. The specific method is to drill more holes in the wall with an electric drill, the more the better.

The tile must require the tile to pull the line, and supplemented by a level, no matter how good the tile blowing technique is, how good it feels, it is recommended that you insist that he use tools to control the quality.

Generally speaking, cement mortar can be used for load-bearing walls, but kitchen flues, toilet air ducts, kitchen and bathroom packaging pipe wall tiles must be added to cement mortar with 108 glue to increase viscosity. When the decoration company pastes the tiles, the tile union will hold a large core board ruler for you to inspect and acceptIn fact, things are not standard when grinding several times, so you can't take that to check the quality of the tiles, you must use a level or aluminum alloy as a ruler to check. The joints of the bathroom tiles can not be too small, the tile joints are too small, it is easy to reduce the service life of the tiles, and the tiles squeeze the glaze after thermal expansion and cold contraction.

Suggestion: Tile grouting should be carried out after the tile is dry. Generally any time after 24 hours.

Before laying tiles in the bathroom, it is necessary to clean up some irresponsible construction team when laying wall tiles, scrape putty wall tiles on the wall, and do not shovel putty direct bricks, this safety risk is very large, due to the strong cement, putty can not hang cement, easy to cause the tiles to fall off. It's also not safe!

When pasting tiles, the bricklayer must be required to pull the line, and supplemented by a level, the practice is to use an electric drill to drill more pits on the wall, the more the better, to prevent hollowing, check that the tile hollow drum can not be knocked just after pasting, you need to wait for two or three hours to knock.

1.Bathroom tile paving method.

2.Seam paving method. When laid, there is a space between the tiles and the tiles, and then the gaps are filled with cement or caulk. The aim is to make the effect more uniform and aesthetically pleasing throughout the bathroom.

3.Colorful caulk. Colorful caulk. It improves the problem that tile cracks are easy to fall off, and makes the color and separation of tiles even.

4.Bathroom tile paving method - precautions.

5.wall treatment. In the general treatment of the bathroom, the walls must have a waterproof coating about 30 cm high to prevent water from flowing through the walls.

From the point of view, most homeowners use paving floor tiles to decorate the bathroom because it can be waterproof to a greater extent, but the placement of wall tiles in the bathroom is not an easy task. You need to master a lot of tricks thenTiles on the walls of the bathroomHow to paste?

Tiles on the walls of the bathroomHow to paste?

1. To clean the surface dirt, we recommend using a flat transfer wall, and then use the level of cement slurry, mainly to prevent the phenomenon of vacuum drum after tiling, and at the same time, to prevent the extractor, installed on the roof, etc., the height should be pointed out that the size of the tile wall and floor tiles must match each other, and there should be a big difference. Finally, according to the height, size and general effect, the placement method is determined. If the tiles on the wall are different, the large tiles are connected from the bottom to the top.

Small size from top to bottom.

2. For the ingredients, prepare and shake well according to the proportion of the instructions until the lubrication is uniform. There is no clogging or pasting, then let the suspension sit for 5-10 minutes after stirring, then add a little more. After stirring for 1 or 2 minutes, it can be used.

Finally, scrape the newly mixed adhesive suspension evenly against the wall and allow the suspension to be in full contact with the back of the tile and the tile can be placed.

Tiles on the walls of the bathroomWhat are the precautions for installation?

Tiles on the walls of the bathroom1. For most people, it should be clear that bricks should be soaked before being placed. It is recommended to soak them in water for about half an hour, so that the tiles can absorb more moisture and adhere to the cement. Sidewalks are safer on walls; In addition, it is essential to inspect the walls before placing the tiles to see if there are any cracks that need to be repaired.

If the putty dust is not removed and the bricks are placed directly, the back tiles will fall off.

2. When paving, it is necessary to choose the appropriate cement label and mix the ratio of cement and sand. Generally speaking, the higher the proportion of cement, the adhesive strength of the tile, but the cement admixture leads to the high expansion of cement mortar. The coefficient increases, and it is easy to crack the bricks after placing them.

The above refers to the ChengTiles on the walls of the bathroomHow to place the contents of the brick wall, I hope to help you, I think in the process of understanding the retaining wall of the bathroom wall, friends are more interested in it is feasible and get your satisfactory answer to the dismantling of the finch.

You can get it for free

Bathroom renovation is a very important part of the renovation of the house. Because the bathroom is relatively humid, avoid moisture and water when installing wall tiles for the bathroom. The quality of tiles on the walls of the bathroom has a direct impact on the comfort and convenience of life in the future.

There are five precautions that need to be paid attention to when installing bright wall tiles for bathrooms, which are: the proportion of cement mortar for laying bathroom wall tiles, the soaking time of bathroom tiles, the joints of wall tiles, the height of bathroom wall tiles, and the alignment of tile textures.

When installing wall tiles for toilets, the mixing ratio of cement sand used to paste bathroom tiles should not be greater than 1:3. If the cement content is too heavy, the cement will crack due to the high expansion coefficient of the cement.

Cement will reduce the lifespan of the tile. The cement cannot be hung on the putty, causing the tiles to fall easily. It's also very unsafe.

If the bathroom is made of glazed wall tiles and cement mortar as an adhesive, the tiles should be stained after being soaked in water. When the bathroom is completely submerged with wall tiles, the soaking time is insufficient, usually 30 minutes.

Bathroom tiles are sewn when wall tiles are installed, regardless of whether they are seamless tiles or not. It is recommended not less than 1 mm. Ordinary wall tiles should be millimeters, and the grooves of old bricks can be widened sufficiently.

The joints of the tiles in the bathroom should not be too small, the joints of the tiles should not be too small to reduce the life of the tiles, and the tiles will tighten the enamel when the tiles undergo thermal expansion and contraction.

The height of the wall tiles in the bathroom is higher than the height of the ceiling, which is generally not less than 10 cm.

When installing wall tiles in the bathroom, pay attention to the texture of the tiles and make the texture smooth. Attention should be paid to the orientation of the front and back of the tile waistline. Don't stick to it. The texture of the tile waistline is consistent with that of the brick.

Pay attention to the above five precautions when installing wall tiles in the bathroom, so that the effect of decoration is better.

You can get it for free

In the decoration, the bathroom needs to be paved with tiles, and if the paving is not good, it is easy to cause water leakage on the ground. Next, I will share with you how to lay tiles in the bathroom and the precautions for laying tiles.

First, the steps of tiling the bathroom.

1. Choose the material first, we can choose small tiles for bathroom tiles, such as small squares, so that it will be very convenient when pasting them yourself.

2. Mix the cement with a small amount of construction glue and mix well to make a paste.

3. Scrape the adhesive to the ground with a shovel blade and then pave the tiles, and then compact it with a shovel, so that it can be pasted from top to bottom or from left to right.

4. After all the paving is completed, use white cement slurry to make the joints and fill the gaps between the tiles, so that it is completed.

Second, the precautions for tiling the bathroom.

1. Seam problem.

When tiling in the bathroom, the joint should not be too small, and the tile gap is too small to reduce the service life of the tile, because the tile will cause the glaze to crack when it undergoes thermal expansion and cold contraction.

2. Caulking problem.

Now many workers are in the bathroom after the tile is paved immediately after the joint, such treatment is very inappropriate, because the tiles are not completely dried up, in the process of hooking, it is easy to cause the tile to loosen, and the later stage will cause the tile to fall off, leaving potential safety hazards.

3. Soak the tiles in water as needed.

Now it is common to see some owners and customers to return the tiles that have not been used, only to find that some cannot be returned, this is because the tiles have been soaked in water. Tile merchants who have soaked in water will not be refunded, so we need to soak in water as needed when laying tiles, so as not to cause unnecessary waste.

4. Make a plan for arranging bricks before paving.

A lot of workers who do not have acres of construction are to get the bricks and start to pave, and so on to a certain extent, it is found that the tile arrangement effect is not good, the proportion is not coordinated, and it needs to be removed and re-paved, so we do a good job of brick arrangement plan before paving, which will not lead to unnecessary loss and waste.

The most important thing to pay attention to when laying tiles in the bathroom is waterproof, so pay attention to the seams and caulking when laying tiles. Dismantle the pure.

Steps for wall tiles wall treatment, before laying the tiles, the primer should be washed. If there is lime plaster, latex paint, wallpaper and other decorations on the walls, or if there is dirt on the floor, it should be cleaned. Otherwise, the cement mortar and the undercoat do not adhere firmly.

Steps for wall tiles wall treatmentIn addition, if there are cracks in the wall itself, they should be properly treated before laying the tiles to prevent the cracks from cracking or falling off due to the increase of cracks in the future basic structure, and the concrete wall must be large in the floor or wall, and the difference in flatness or verticality is too large. Cement mortar is also used for leveling.

Steps for wall tiles wall treatmentExtended Information:

1. Before construction, all types of dirt on the wide and wall-resistant surface of the bathroom wall should be cleaned. The walls must first be smoothed and then leveled with cement slurry to avoid hollowing after placing the tiles. 2. The bathroom will avoid the exhaust machine, and the ceiling will be installed, so special attention should be paid to the height, and secondly, the size of the wall tiles and the floor tiles should correspond to each other, and there can not be too many differences, and finally, according to the height, size and general effect to determine the method 3, add fresh water to the adhesive powder in batches, and mix it in a certain proportion according to the instructions.

Stir and mix the adhesive until it is evenly lubricated. There are no obvious lumps. After stirring, let stand for 5 to 10 minutes, then stir for 1 to 2 minutes to use.

4. Spread the newly mixed adhesive mixture evenly onto the wall so that the mixture is in contact with the back of the tile. Adjust the size of the joints according to the size of the tiles, and keep the corresponding size between the bricks for caulking. It can be determined with a toothpick or similar.

Use a professional measuring instrument to check the flatness of the tiles after pasting. 1. Many people know that tiles must be soaked before being placed. As a rule, the tiles that must be placed are soaked in water for about half an hour, so that the tiles can absorb water and easily adhere to the cement.

2. Before laying tiles, the walls should be inspected to see if there are any cracks that need to be repaired. If the putty powder is not cleaned, it will cause the tiles to fall off.

You can get it for free

Generally speaking, there must be a bathroom in the house, and how the bathroom should be decorated is also something that many people want to know, whether it is the decoration of the floor or the wall of the sanitary room, it is very important. At present, the bathroom wall decoration of many families is still mainly based on tiles, but the bathroom wall decoration is not only a kind of tiles. The following is an introduction to what else can be used for bathroom wall decoration.

When decorating the bathroom, most people will still choose wall tiles, because tiles can be waterproof and non-slip, relatively easy to clean, there are many colors to choose from, it is easier to match, because the choice of tile decoration is still the mainstream.

Tiles are no longer enough to meet individual needs, and new materials have emerged, such as waterproof wall paint. This lacquer is made with a unique water-repellent ingredient that forms a dense film that blocks water molecules from penetrating in, making it ideal for use in the bathroom. Waterproof wall paint is very convenient to paint, the effect is also better, it is more convenient to clean, and it is not easy to mildew, so it is a good material.

The general wallpaper is destroyed when it encounters water, but the development of science and technology is very fast, and now the high-tech wallpaper can also have the function of waterproofing, so the waterproof wallpaper is also used in the decoration of the bathroom. When using waterproof wallpaper, it is best to choose those bright light-colored wallpapers that are consistent with the style of the bathroom, which can make the bathroom appear brighter. Of course, although waterproof wallpaper has a waterproof function, it is better not to pour water directly on the wallpaper with your mouth, and it is generally better to use it in a dry area.

The waterproof wood board has usually undergone a unique process treatment, and the advantages of the wood itself have been retained, and it can not be afraid of wet and slippery air, which is a good material for the bathroom.

You can get it for free