Is it necessary to add gasoline to the 97 of the Atez 2 0

1. The manual of today's vehicle will indicate how much oil the car uses, and the owner can refuel according to the instructions in the manual. How much oil to add during the run-in period of the new car does not affect the quality of the run-in of the new car.

2. Many car owners mistakenly believe that the label of gasoline is the standard of oil purity and quality, and the higher the label of the vehicle, the better, which is wrong. The level of gasoline marking only indicates the size of the octane number of gasoline, and different grades of gasoline should be selected according to the different compression ratio of the engine. Mid-range cars with compression ratios between should generally use 93 gasoline; Cars with a compression ratio greater than 97 should use 97 gasoline.

At present, the compression ratio of domestic cars is generally above 9, and the use of 93 gasoline is enough.

3. If the compression ratio of the vehicle is low, the use of 97 gasoline will cause the phenomenon of "retardant combustion", that is, the pressure to the head is not yet the spontaneous ignition point, and the gasoline will be incompletely combusted, which is also damaging to the vehicle.

Therefore, how much oil to add during the run-in period of the new car can be implemented in accordance with the vehicle manual.

Hello, for the problem we mentioned, I personally recommend that the normal 95 clean gasoline is fine, there is no need to fill the 97 or 98 gasoline, the 95 gasoline of this model is completely sufficient.

Fill gasoline according to the manufacturer's requirements, and there is a prompt on the fuel tank cap, as long as it is not lower than the minimum label requirements, but the anti-knock performance is different. If the tank cap is marked with 92, then it is also okay to use 92. Do not blindly use high-standard Qing shouting gasoline, which will not only cause the phenomenon of weak acceleration while driving, but also can not give full play to its high explosion-proof advantages bridge socks.

The following suggestions are given for reference:1. In general, the label on a car that allows gasoline is the lowest label for safe burning.

For example, it is recommended to add more than 92 gasoline, indicating that the minimum allowable grade is 92, but the minimum grade is by no means the best fuel efficiency gasoline. 2.Generally, the first choice for adding gasoline is to look at the cylinder compression ratio.

If the general compression ratio is greater than or equal to 10:1, it is recommended to use gasoline with a grade of 95 or above. In addition, when the engine was developed, there was a design gasoline label, and all the design sensors were based on this label.

Engines with a 10:1 compression ratio are generally developed with the No. 95, and on this mark, the best combustion efficiency can be achieved. 3.

If the car has problems such as increased fuel consumption, insufficient power, idle shaking, and difficulty in cold starting, it is likely to be caused by carbon deposits in the engine. If the carbon deposits are not removed in time, it is easy to reduce the tolerance of the engine over time, resulting in poor operation of the engine. Therefore, it is necessary to remove carbon deposits on a regular basis.

Fill with No. 92 gasoline. The first criterion for selecting gasoline grades for automobiles is the compression ratio of the engine, which is also the core energy-saving index of modern automobiles. The best way to reduce fuel costs is to increase the compression ratio of the engine.

Gasoline labels indicate the relative octane number of gasoline. The octane number is a numerical value that represents the anti-knock combustion capacity of gasoline. The higher the anti-knock performance, the better the anti-knock performance.

The octane number is a value obtained by comparing actual gasoline with a standard fuel that is artificially blended. Standard fuels have two components, one is isooctane, which has very good antiknock properties, and the other is n-heptane, which has very poor antiknock properties. The value of isooctane is set to 100, while the value of n-heptane is set to 0.

Through experiments, the ratio of the mixture of two standard gasolines was adjusted to achieve the same anti-knock performance as the actual gasoline, and this ratio is what we call the octane number. For example, for example, our commonly used 93 gasoline has an octane rating of 93, which means that it has the same antiknock performance as standard gasoline with 93% isooctane and 7% n-heptane. The brighter the octane number, the higher the hole slip, and the smaller the detonation force during combustion.

If the compression ratio is high and the pressure in the combustion chamber is high, the use of fuel with low knock resistance is prone to detonation. Detonation is the abnormal combustion of a gasoline engine. If knocking occurs, it will lead to a decrease in power, an increase in fuel consumption, and an increase in noise.

In severe cases, it will cause the engine to stall and damage the engine-related parts, which will greatly affect the life of the car.

How many liters of engine oil does Atez add Generally speaking, Atez ( Check Transaction Price |Detailed explanation of the model ) Liters of engine oil are enough. When adding engine oil, be sure to add the oil suitable for the car according to the car manual, if the added oil is not suitable, it will affect its normal lubrication ability, and it will also affect the engine of the car.

About Artez:

The Atez is a mid-size sedan manufactured by FAW Mazda.

In terms of power, the Atez has a choice of liter naturally aspirated and liter naturally aspirated engines. Among them, the maximum horsepower of the naturally aspirated engine is 158 hp, the maximum power is 116 kW, and the maximum torque is 192 hp, the maximum power is 141 kW, and the maximum torque is 252 Nm.

In terms of fuel consumption, according to the comprehensive fuel consumption of the Ministry of Industry and Information Technology, the fuel consumption of Atez is, and the fuel consumption of Atez is 7L 100km. According to the measured data of some Atez owners, its fuel consumption is generally about 8L 100km.

In terms of transmission, the entire Atez series uses a 6-speed automatic manual transmission.

Artezga 92 or 95

Atez will do it with 92 gasoline. The Atez is a mid-size sedan owned by Mazda, and this car uses a total of two engines, one is a liter naturally aspirated engine and the other is a liter naturally aspirated engine. The length, width and height of the Atez are 4870 mm, 1840 mm, 1445 mm, and the wheelbase is 2830 mm.

Atez's naturally aspirated engine has 158 hp and 202 Nm of torque, with a maximum power of 6,400 rpm and a maximum torque of 4,000 rpm. This engine is equipped with in-cylinder direct injection technology and uses aluminum alloy cylinder head block.

This engine is mated to a 6AT gearbox.

The naturally aspirated engine has 192 hp and 252 Nm of torque, with a maximum power of 6,100 rpm and a maximum torque of 3,250 rpm. The engine is equipped with direct injection technology and uses an aluminum alloy cylinder head block.

This engine is mated to a 6AT gearbox.

The Atez uses MacPherson independent suspension for the front suspension and multi-link independent suspension for the rear.

The multi-link independent suspension can improve the ground resistance of the wheels, and it can also improve the handling and ride comfort of the car.

The multi-link suspension is actually an improved product based on the double wishbone suspension, which is to change the two wishbones of the double wishbone suspension into a separate link. (Photo by Q&A: Q&A called the beast) @2019

Atez can run on 92 gasoline. The Atez is a mid-size car owned by Mazda. The car uses two engines, one is a liter naturally aspirated engine and the other is a liter naturally aspirated engine.

The Atez has a length, width and height of 4870 mm, 1840 mm and 1445 mm, respectively, and a wheelbase of 2830 mm.

Atez's liter-litre naturally aspirated engine has a maximum torque of 158 hp and 202 Nm. The engine has a maximum power deficit rate of 6,400 rpm and a maximum torque of 4,000 rpm. The engine is equipped with direct injection technology and uses an aluminum alloy cylinder head and block.

Mated to this engine is a 6AT gearbox.

Atez's liter naturally aspirated engine has a maximum torque of 192 hp and 252 Nm. The engine has a maximum power of 6,100 rpm and a maximum torque of 3,250 rpm. The engine is equipped with in-cylinder Kaixun direct injection technology and uses an aluminum alloy cylinder head and block.

Mated to this engine is a 6AT gearbox.

The front suspension of the Atez uses MacPherson independent suspension, and the rear suspension uses multi-link independent suspension.

Multi-link independent suspension can improve the performance of the wheels on the ground, as well as the handling and ride comfort of the car.

The multi-link suspension is actually an improvement based on the double wishbone suspension, which changes the two wishbones of the double wishbone suspension to separate linkages.