What tools do I need to make an HG gunpla?

It depends on how you want to group.

If it's a prime group, it's as long as it.

A pair of scissors. A pen knife.

That's it. If you want to color.

It is divided into: Pump.

Sprinkler hand coating. Pump.

Spraying is the most difficult.

The one-time investment is relatively large.

It needs to be honed slowly.

Pump and airbrush. 500+

Pigments are dedicated to Tamiya.

12 a bottle. I also want a thinner from the county.

60 or so a bottle.

The effect of pump spray is the best, and the tank spray is the sprinkler irrigation of the buying Tamiya.

There are large flats and small vials.

**Between 25 and 65.

The one-time investment of tank spraying is not large, but it is more expensive than pumps to accumulate in the long run, and it is difficult to make a shadow.

The pen is a special marker pen for Tamiya, 15-25 yuan apiece.

It's like correction fluid.

Spit directly on the model.

There is also a face reading pen.

Coated. Pencil painting is not suitable for painting large areas.

Because there will be pen marks. If you want to make it more advanced.

For example, retrofitting. Battle damage.

Still needed. Offset, putty.

ab Fill the soil. Water recharges the soil.

Toothpaste fills the soil. Sandpaper hand file.

Slip glue. masking tape and more.

GUNPLA Making Tips How to polish a Gundam before spraying.

For cutting: 1. Special scissors for plastic models. 2. Utility knife. 3. Pencil knife. 4. Steel ruler. 5. Cut the backing plate.

For grinding: 1, file. 2. Sandpaper. 3. Old toothbrush.

For assembly: 1. Instant glue. 2. Special glue for plastic model.

Prime groups generally do just that!

Your nozzle with sandpaper 1000-2000 will do just fine!

Model pliers, pen sharpeners, sandpaper.

First cut the nozzle with pliers, sharpen the nozzle with a pen knife, and finally grind it with sandpaper.

Listen to me, I'm an expert at this because I do it a lot.

There are several tools: utility knife, tweezers, pliers, 502 super glue.

Trust me, absolutely.

1. The ratio is different: Hg, mg is 1:144, mg is 1:100.

2. Fineness: The fineness of MG is greater than that of Hg and RG.

3. Different grades: HG has no skeleton, almost no internal composition, and color separation is not detailed, but it is better to have a wide variety and many to choose from; RG is a new model scale but both (1:144) and will be slightly smaller than some HGs, where RG has a skeleton and internal structure, but the parts of the model are too small and fragile to be easily lost.

IntroductionThe Gundam model belongs to the science fiction model, and is divided into many series, including PG (Perfect Grade), MG (Master Grade), MB (Metal Build), HG (High Grade), TV, FG (First Grade), RG (Real Grade), RE 100, SD, FG, EG, etc.

Each different series has its own characteristics and proportions. Because many friends are new to Gundam and its models.

In 1979, the anime "Mobile Suit Gundam 0079" began to be released in Japan, and after the anime was broadcast, only alloy toys were available on the market; In June 1980, model dealer Bandai began to release models, and the first model was the RX-78-2 GUNDAM priced at 300 yen and scaled at 1:144. Since then, the GUNPLA market has been established for 40 years.

Differences: 1. The ratio is different: Hg, mg is 1:144, mg is 1:100

2. Fineness: The fineness of MG is greater than that of Hg and RG.

3. Different grades: HGHG and RG belong to the same ratio (1:144), MG (1:

100）。Among them, HG has no skeleton, almost no internal composition, and color separation is not detailed, but it is better because there are many types and there are many to choose from; RG is a new model scale but both (1:144) and will be slightly smaller than some HGs, where RG has a skeleton and internal structure, but the parts of the model are too small and fragile to be easily lost.

1. Difference in proportion:

The Hg is 1:144, about 13cm, with a good appearance and medium movable joints.

The mg is 1:100, the shape is fine, and the movable joints are reasonable.

Second, the difference in parts and accessories:

There are not many HG parts, the box is small, more popular, suitable for novices, a few parts of the HG have a streamlined skeleton, and most of them are hollow.

There are generally more MG parts, and the details of the engraving are more than RG, and most of the later models have a complete skeleton internal structure.

3. Differences in proportional provisions:

The ratio of MG is set at 1:100, and since the appearance of HG, Bandai has continued to introduce 1:144-1:

100-1:60 until 1:200 and 1:

550 and other models of each staring at the Bikai preparation case.

The differences between GUNPLA RG and HG are as follows:

1. Whether there is a skeleton.

A few parts of the HG have a reduced skeleton, most of them are hollow; RG has a one-piece skeleton, but due to its small proportions, the skeleton is more fragile.

2. The degree of exquisiteness of the production is different.

The opening of the HG series is relatively simple, and the color separation is relatively simplified, usually there are only five to ten plates in a set of models; There are dozens of boards in a set of RG models, as well as gorgeous stickers and complex internal structures.

3. **Different.

The HG model has shortcomings such as low mobility and inaccurate appearance, so it is much cheaper than RG.

4. The scale constraints of the model are different.

The ratio of RG is set at 1:144; And HG does not have a proportional limit of pure and non-existent.

5. Suitable for different people.

HG is suitable for novices to get started, suitable for newcomers to play in the prime group or suitable for the old man's magic change; RG is suitable for veterans who play Gundam regularly.

The difference between Gundam MG and RG is:

1. The ratio is different: Hg, MG is 1:144, MG is 1:1002, fineness: the fineness of MG is greater than that of Hg and RG

3. Different grades: The HG Gundam models belong to the science fiction model, which is divided into many series, including PG (Perfect Grade), MG (Master Grade), MB (Metal Build), HG (High Grade), TV, FG (First Grade), RG (Real Grade), RE 100, SD, FG, EG and so on. Each different series has its own characteristics and differences in the proportion of noise.

Introduction to GUNPLA and judgment of authenticity and falsity:

GUNPLA has a huge fan base around the world, and there are even model-making competitions around it. GUNPLA production is not limited to assembling parts, many players will incorporate their own ideas into the model, and create their own GUNPLA through painting, transformation, etc.

The two GUNPLA models on the box are Bandai**. In the case of the Gundam Strap Model, a red logo on the cover indicates that the model (or its box) was manufactured before the end of 2018. In September 2018, Bandai Spirits, which includes GUNPLA, changed the logo to blue, and since then, new and reprinted GUNPLAs have been blue.

The above content refers to the Encyclopedia Liquid Xingliang - Gunpla.

1. Gundam HG (High Grade) The premium series of GUNPLA is a popular product of Bandai GUNPLA, and the derivative series are the HGUC and TV series. Pros: Cheap, the overall production difficulty is medium to low.

Cons: ** and the limitation of crafting difficulty caused the HG series to be poor in detail and articulation, without flashy stickers and complex interiors.

2. Gundam RG (Real Grade) is a small-scale main series produced by Bandai in 2010. Although the Sparrow is small and has all the internal organs, although it is small, it has a strong internal structure and the number of plates, and the mobility is also improved compared with HG, and the cost performance is higher. Pros:

There are more detail maps and richer internal structures, and the cost performance is not low. Cons: Aspects such as detail and moving, appearance, etc., are just higher than the HG and lower than the other series.

3. Gundam MG (Master Grade) GUNPLA Master Series. The model has a harmonious proportion, and the beauty and texture coexist, so it is the first choice for most GUNPLA players if you have high requirements for the model. Pros:

The main part of the model incorporates an interior structure with details. Cons: On the expensive side, the nozzle is also difficult to handle.

4. Lee Se Gundam PG (Perfect Grade) Gundam Perfect Season Series. Bandai basically only produces one PG model a year, and the PG model is perfect in every aspect with the goal of pursuing perfection. Pros:

All fingers are movable; A light-emitting device was added to the interior, and the model's eyes were illuminated; Various hatches on the fuselage can be opened, leaking out the exquisite machine inside; The model is more realistic. Cons: Expensive.