The dehydration of the Little Swan washing machine is what the teacher wants to mention is where it

There are many reasons, such as the washing machine is not placed steadily, no matter whether the ground is flat or not, the washing machine should be perpendicular to the horizontal plane, and the four feet under the washing machine should land smoothly and cannot appear in the air.

If there is no problem with the placement, it is mostly caused by the imbalance of the four booms on the bucket, or the spring elasticity is inconsistent, the length of the boom should be adjusted, and if the spring elasticity is inconsistent, the spring with the same elastic force should be replaced.

If the adjustment is too troublesome, you can open the lid when washing the clothes, and when the dehydration program arrives, the washing machine will send out an alarm prompt, then the clothes in the bucket are evenly placed around the bucket, and then the lid is closed, and the dehydration work will be automatically carried out after a while, which will greatly reduce the vibration noise and ensure the smooth progress of dehydration.

Failure of the laundry bucket support, such as a dislodged boom and a misaligned or broken spring.

Balance ring salt water leakage.

The clutch connecting disc is warped or cracked.

The bearing of the dewatered shaft is worn and the clearance increases.

The installation of the washing machine is uneven, and the ground of the washing machine installation should be as level as possible, and it can be adjusted by adjusting the activity adjustment feet of the washing machine.

First check that the laundry is laid out flat, and then check that the washing machine is placed smoothly, which can also happen if there is a problem with the internal support spring. Generally, there are more cases where the clothes are not put away.

It's quite normal, and when you're dehydrated, it turns fast. The centrifugal force is high. The barrel shook a lot. The sound is quite loud...

The edges of my washing machine are all traces of friction and high temperature melting when dehydration...

Cygnet. What is the reason why the dehydration of the washing machine washing line is not good?

There may be several reasons why the Little Swan washing machine does not dehydrate:

1. Unbalanced clothing:

If the laundry is not balanced, the washing machine will automatically set a low speed, and the dehydration effect will be slightly worse.

2. The top cover switch is damaged

If the lid of the washing machine is damaged and not closed tightly, so the lid circuit is powered off, resulting in the washing machine not dehydrating.

3. Blockage of drainage system:

If the drainage system is blocked, the washing liquid in the water cylinder cannot be discharged, resulting in the water level switch cannot be reset, so the washing machine cannot be dehydrated.

4. Loose motor plug:

Drum washing machine.

Connectors are used for the connecting wires.

Often, the motor plug is loose due to vibration and other reasons, or the plug is ejected during installation. If the plug is loose, it is recommended to replug it in and then tie it tightly with a strapping cord to prevent it from falling off again.

5. Motor overheating:

Due to overload or stalled rotation, it will cause the motor to heat up.

Then when the motor thermal protector is working, the washing machine will not be dehydrated, and you can use it patiently by waiting patiently for the thermal protector to reset.

If the computer control board of the washing machine is faulty, you can only find a professional maintenance personnel to replace it. This answer applies to most of the washing machine models of Little Swan.

Possible cause 1: The laundry is unbalanced during washing. When there is too much laundry, the washing can not be adjusted to the balance, then the washing machine will automatically adjust to a low speed resulting in poor dehydration effect, if this is the reason why the washing machine can not be dehydrated, then don't worry too much:

You can put less clothes before washing them, and don't stuff too much at once, so as not to cause an imbalance during washing. And the effect of dehydration is not good. Possible Cause 2:

The safety switch on the top cover of the washing machine is damaged. The process of dewatering the washing machine is a mechanical movement that operates at high speed. Try not to open the top cover during the dehydration process to avoid damage to the top linkage switch, if the top cover linkage switch of the washing machine is damaged, the washing machine can not be dehydrated.

caused by the texture of the clothing. Compared with summer, there are many types of clothes in winter, such as tweed type of clothes with strong water absorption, if you choose low-speed dehydration, it will cause the illusion that the washing machine cannot be dehydrated, so it is recommended to use high-speed dehydration for washing products with strong water absorption.

Reply: If it is helpful to you, please give a thumbs up, thank you!

The washing machine cannot be washed but can be dehydrated, usually for the following reasons:1Water level switch failureThe water level switch is faulty, and the water level cannot be fed back to the computer board, and the motor will naturally not rotate, and the washing program will not be carried out.

Solution: Replace the matching water level switch. 2.

Under the cracking washing program of the wave wheel screw groove, the motor works, but does not wash, it may be the crack of the wave wheel screw groove, resulting in the wave wheel and the spindle can not be closely connected, and therefore cannot rotate. Solution: Replace the same type of wave wheel 3

If the clutch fails, the clutch wheel is rotated clockwise and counterclockwise by hand, and if the wave wheel cannot be rotated, it is usually the planetary gear inside the clutch that is damaged and stuck. Solution: Replace the clutch.

4.If the capacitor is damaged, if the washing machine can be dehydrated, but can not be washed and the indicator light is on after power-on, the motor does not rotate, only the buzzing electromagnetic sound, the capacitor can be replaced, and the multimeter r 100 gear measures the resistance of the capacitor. Connect the pen to the capacitor, and the resistance of the watch hand pointing to zero indicates that the capacitor has broken down.

Solution: Replace the capacitor. 5.

If the drain valve fails, if the washing machine can be dehydrated, but cannot be washed and the drainage is not smooth, or even can not drain the water, you can check the drain valve tension spring. If the tension spring is broken, the drain valve cannot be opened when the electromagnet is engaged, so the drainage is not smooth or even cannot be drained. Workaround:

Replace the tension spring.

The washing machine can only be dehydrated and cannot be washed, which is mostly caused by some not entering the water or not entering the water.

1. Troubleshooting of water ingress:

1. The problem is mostly in the water level detection switch, due to the poor contact caused by oxidation, dirt or ablation of the contact, the power supply can not be turned on, causing more than water ingress, at this time the water level switch should be overhauled or replaced.

2. If the pressure pipe is worn and broken due to a long period of use, or the pressure pipe is in poor contact with the water level switch and the outer barrel air nozzle or disconnected, causing air leakage, it can also lead to more than water ingress, because the computer board is not at the pressure and the water level switch does not work, and the water level is not yet in action, at this time, the pressure pipe should be checked for wear and whether there is poor contact or disconnection between the two joints.

3. Due to the long use time, there is a foreign body blocking the air valve mouth, resulting in the pressure can not be transmitted to the pressure switch, at this time the big nut should be unscrewed, and then take out the inner barrel to take out the foreign body blocking the air noveil.

4. The valve core of the water inlet valve is stuck, resulting in the inability to reset, resulting in the washing machine being flooded, and the water inlet valve should be overhauled or replaced.

5. If everything is invalid, you should try to replace the computer board, because all actions are controlled by the computer board.

Second, the maintenance method without water ingress:

1. Turn on the power supply, the ears are close to the water inlet valve for "buzzing" sound, if so, check whether the tap water is cut off, close the faucet, screw out the water inlet pipe joint to check whether the filter screen of the water inlet valve is blocked by foreign objects, and if there is a pull out of the filter screen for cleaning. If the problem is not solved, the inlet valve should be replaced, and the valve core of the inlet valve may be stuck and cannot be opened.

2. If the water inlet valve does not have a "buzzing" sound, you should try to replace the computer board at this time, and the problem may be on the computer board.

Put the clothes to be dehydrated in the washing machine and put the lid on it, start the power button, press the wash button to adjust the washing light to off or the time is 0, press the rinse button to adjust to the rinse light to turn off or the number of times is 0, and then press the start button.

The general fully automatic washing machine is such a procedure for separate spinning. That is to say, in the running state, turn off the light on the washing button, and then turn off the light of the rinsing button according to the same method, only keep the dehydration light, and finally press the start button to enter the single dehydration state. The washing machines of Little Swan are also classified, which can be divided into fully automatic washing machines and semi-automatic washing machines.

There is a difference between the two types of washing machines in terms of non-dehydration, so we have to treat the situation of the little swan washing machine without dehydration separately.

If there is a problem with the motherboard, it may be caused by the relay on the motherboard, or the program file is missing or damaged.

The Little Swan washing machine can't be washed but can be dehydrated, what's going on? I think if the washing machine can't be washed, it can only be dehydrated, maybe there is a problem with your motor. You can find a professional maintenance person to come and fix it.

You can check the included instruction manual to confirm whether your usage method is the official correct usage method, and then confirm whether it is a problem with the machine.

About the Little Swan washing machine is that it can't be washed, but it can be dehydrated, then it must be that the motor of the washing is damaged, you can just check the line, or the motor or something.

What's the deal with the Little Swan washing machine that can't be washed but can be dehydrated? Dear, hello, 1. First check the safety switch in the cover, turn on the power program of the washing machine to the dehydration state, press the safety switch brake arm to the lowest with your hands or tools, if the computer board is dismantled to give an alarm and the digital tube displays "E1", the safety switch or computer board should be replaced at this time. 2. If the safety switch brake arm can be dehydrated normally after pressing it with hands or tools, it means that the power-off distance of the safety switch is low, and the safety switch should be replaced at this time.

3. If in the dehydration state, only the wave wheel rotates and the inner barrel does not rotate, at this time it should be checked whether the traction 3 is whether the clutch pawl and ratchet wheel have been separated, if not, it is possible that the adjustment rod nut on the drain valve is loose and worn, resulting in insufficient opening distance, at this time, the distance of the adjustment circle bar should be readjusted, so that it can separate the pawl and ratchet of the clutch. I hope my answer is helpful to you, and finally I wish you good health and a happy mood again! <>

Common reasons: 1. There is a problem with the capacitance of the Little Swan washing machine, resulting in insufficient output power. 2. The fixed bridge fibrillation program of the Little Swan washing machine computer is damaged, and the washing machine cannot enter the dehydration program.

3. The solenoid valve is damaged, resulting in dehydration and cannot operate normally. 4. The motor performance of Xiaotan jujube swan washing machine is poor.

Suggested workaround:

1. Test whether the empty barrel of the Little Swan washing machine can be dehydrated, if so, it means that the fastening screws of the inner barrel of the Little Swan washing machine are loose, or the bottom bracket of the inner barrel of the washing machine is damaged, and the corresponding parts can be replaced directly.

2. If the drainage system of the Little Swan washing machine is blocked or the drain valve is broken, the washing liquid in the water cylinder cannot be discharged, the washing liquid in the cylinder is difficult to drain and dismantle for a while, the water level switch cannot be reset in time, and the washing machine cannot enter the dehydration program. It is recommended to wait for a while after shutting down and then restarting.

3. This requires a new solenoid valve, which can be bought at a special store.

4. If the above methods still can't solve the problem, then you need to ask a professional maintenance master to come to the door for maintenance.

How to solve the problem of Little Swan washing machine free from dehydration?

Little Swan washing machine is one of the preferred brands for many family users when buying washing machines, and it is deeply loved by users because of its good cleaning effect, low noise in the washing process, and high stability. However, for the Little Swan washing machine does not dehydrate the fault, many users feel at a loss. This article will introduce the solution to the problem of avoiding dehydration failure of the Little Swan washing machine.

1. Check the drain pipe.

The failure of the Little Swan washing machine not dehydrating is usually due to a problem with the drain pipe, which is one of the more common reasons, and the part may have a failure such as blockage. You can remove the drain pipe from its original position, check whether there is water, hair, debris and other buried materials inside, and use a stick or other tools to remove it.

2. Check the motor and transmission system.

The failure of the Little Swan washing machine to not dehydrate may also be due to a problem with the motor and transmission system. The motor can be inspected and made sure that it is working properly, and that the drivetrain components are not overly worn to avoid affecting the normal operation of the machine.

3. Check the program control board.

If the program control board fails, it will also cause the Little Swan washing machine to not dehydrate. Check if the program control board is working properly, and if you find any abnormalities, it is recommended to replace them.

4. Clean the laundry tub.

The Little Swan washing machine is not dehydrated, and it may also be due to a malfunction such as a clogged laundry basin. Pay attention to clean the laundry basin regularly, and check whether the basin is full of dirt, if so, you can use a special detergent for washing machines or cleaning agents such as Xiaosu liquid Kai Maoba, white vinegar and other cleaning effects.

In short, to solve the problem of non-dehydration of the Little Swan washing machine, it is necessary to start from many aspects, investigate and deal with specific problems in a timely manner. In this way, you can avoid long-term breakdowns and keep your washing machine working for a long time.