Does anyone know how to make a kite? How to make a kite?

The practice of ordinary kites is generally to use bamboo as a skeleton and paper as meat.

Bamboo is the main material used to make kite skeletons. Bamboo with a wall thickness of 3 5 cm was selected and cut into bamboo chips, and the toughness of the bamboo pieces was used to make the skeleton of the kite. Make a variety of kite skeletons according to your hobbies, such as dragonflies and butterflies.

Paper is the main material of the kite, with thin fibers long and uniform, tough, moisture and impact resistance, white and clean color is better. Paste the paper on the skeleton, tie it to the line, and the kite is ready.

At this time, you can also paint the finished kite with your favorite color, lace, or tie a ribbon and hang a paper ring. However, it cannot affect the flight of the kite in the air, because too many attachments will make the kite fly unbalanced.

Grace ....Just make a simple one.

First, make two wooden strips (thin and light) to make them look like a cross.

Then glue the colored paper to the cross, and finally tie a line (or fishing line) to the center of the cross.

That's it.

Still want money upstairs ?

The skeleton is made of bamboo, and I've made swallow-shaped ones, and I'm pasting a very thin cloth, not paper, and the bamboo is easy to break, and it's better to light a candle when it's bent, and bend it while baking, so that it won't break, and it's the shape that is bent, and it won't bounce back.

The tail needs to be balanced! Otherwise, you can't fly.

The steps to make a kite are as follows:

1. Take a piece of paper and make the body of a kite. If necessary, four pieces of paper can be glued together with tape. But you have to tape them together the right way!

Tape two sheets of paper together on top and the other two on the bottom. They are then taped together to make sure they are secure.

2. Just cut off the 4 corners of the paper to get a diamond-shaped piece of paper. Take a look at the design scheme below, you can do it according to this scale. This diamond needs to be slightly larger at the bottom, about 8 centimeters down from the top to the left and right corners of the diamond.

3. Connect two sticks or pipes together. Make sure they are at the right point by marking them with a line on the paper first. Let the knot be tied as tightly as possible! The knot should be firmly tied and the excess cord cut off.

Any cord that can be tied tightly together can be used. As long as the rope does not loosen on its own, and it is not very straight and stiff, then it is an ideal rope for making kites. The sticks of wooden barbecue skewers are perfect for making the skeleton of a kite.

4. Tie 4 holes in each corner of the diamond-shaped paper. Each hole is threaded through a string, which is wrapped around each tube or stick. Leave some extra space at the top, and tie a stiffener if needed later. Tie a knot in the wooden stick of the kite.

5. The left and right hand directions of the horizontal stick are tied to the line rope. Then tie to the center of the cord where you are ready to hang the string. Of course, the longer the string for flying kites, the better!

6. Tie the corners or tapes of the paper together to form the tail. You can add some small strips to the tail of the kite, which will add buoyancy and weight to the kite. At the same time, it looks more perfect.

1. Prepare the items paper, thin sticks, staring adhesives, etc., and build the thin sticks into the outline of a kite. Note that the letter brother at the interface is tied firmly with a wire. You can also wrap a layer of paper around the stick, so that you can put on the cover for a while.

2. Paste a cover for the kite.

Kaitan returns 3, make three tails for the kite, paste it first or not, and see the actual situation when flying.

4. In addition to the triangle, it can also be made into a diamond shape, the method is similar, but the shape changes slightly.

5. Tie the line and test the flight for the kite, the line is best to use a strong one, and it is good to take it back when it flies high. The position of the tie line may affect the kite's takeoff, so pay attention to the adjustment.

The steps to make a kite are as follows:1. Prepare newspapers, bamboo wire, knives, adhesive tape, and fine threads.

2. Cut bamboo, according to the needs of the kite, cut into the skeleton of the kite.

3. Coat the thin wire or paper with paste to tie the bamboo strips into a kite skeleton.

4. According to the outline of the skeleton and the kite, the skeleton is pasted on the newspaper, and the appearance of the kite is cut.

Kites were invented by ancient working people in the Spring and Autumn Period of the Eastern Zhou Dynasty in China, and have been around for more than 2,000 years. According to legend, Mo Zhai made a wooden bird out of wood, which was developed for three years, which is the earliest origin of human kites. Later, Lu Ban used bamboo to improve Mo Zhai's kite material.

It was not until the Eastern Han Dynasty that Cai Lun improved papermaking and began to make kites from paper, called "paper kites".

1. Cut out the shape of the kite.

Draw the desired shape on a piece of plastic paper, cut it out with scissors, and then glue a wooden stick to the top of the paper.

2. Cut out the shape of the red paper.

Use a piece of red plastic paper to cut out a desired shape, and glue the red paper to the other side of the white paper.

3. Make small holes in the paper.

Use a blue marker pen to draw a fixed position on the plastic paper, make a small hole with the tip of the pen, and tie a rope to the top of the kite.

4. Attach the kite tail.

The platter made a long strip of tail out of red plastic paper and glued it to the bottom of the kite, and the production was complete.

Kite flying: Kite flying is one of the traditional folk games, and the Qingming Festival is a custom of holding a racket. Kites are also known as organs, paper harriers, harriers, and paper kites.

Originated in China, it is a communication tool invented by the ancient working people, the first kite was made of bamboo by Luban, and later only paper kites were found in the imperial palace. Hokkien is called wind blowing. A kite is a heavier-than-air product that can be used to help the wind float in the air.

Making a kite is simple.

The first thing to do is to have tools and materials

Personally, I make an octagonal kite, you know the pentagram.

Octagonal is three more corners.

The material is eight thin bamboos draped to be the same length.

And glue. Eight bamboos are draped together into an octagonal shape

Glue the white paper with glue

Do the same thing for everything else.