How to prevent cypress roots from cracking, and how to deal with cypress wood without cracking

Cedar. Methods of root crack prevention:

1. It is best not to peel the log, soak it in water for 3 months, if you are not in a hurry, you can soak it for half a year, depending on the size and shape of the log. It is best to change the water when it is yellow, otherwise it will stink.

2. After soaking in water, dry in the shade, there are two ways to do so.

Shade drying method 1: After soaking, take it to a cool place to dry, the shade drying time is 1 year to 3 years, depending on the size and shape of the wood, remember to dry in the shade rather than air, remember not to put it in a place where the sun can reach, try not to be blown directly by the wind and keep air circulation.

Shade drying method 2: seal the shade dry, you can use a plastic bag or other items to seal the cypress roots, note that the sealing shade drying is to be carried out when the cypress roots are almost dry. In many cases, the two methods are combined, and they should be dried in a cool place first, and then placed in a sealed bag after the moisture is almost dry.

4. After drying, carving and polishing are carried out, and large carvings are recommended to be painted, which can effectively prevent cracking.

Hello dear! I'm glad to answer for you: how to deal with cypress without cracking Answer: Hello dear <>

Methods to control the cracking of cypress boards: If allowed, it is best to re-cut the thick board into thin plates or small square timber for drying, which can more effectively prevent end cracks and other dry defects. Before the kiln is dried, the part of the cavity leakage that has occurred in the end crack is intercepted, because the original end crack is easy to continue to extend.

Lead infiltration is applied to the ends of boards that do not have end cracks with paraffin oil or thick paint. Thank you for your patience. The above is my full reply, if you are satisfied with my service, please give a thumbs up, and I wish you all the best!

Peace and joy!

Cypress, is a cypress tree, up to 35 meters high, 2 meters diameter at breast height; The bark is light brownish gray, the twigs are slender and drooping, green, the older twigs are cylindrical, dark brownish purple, the male cones are oval or ovate, the cones are round and spherical, the seeds are broadly obovate rhomboid-shaped or nearly round, light brown when ripe, shiny, the flowering period is 3 May, mainly distributed in the Yangtze River basin and the south of the region, and the vertical distribution is mainly between 300 and 1000 meters above sea level.

China has a long history of cultivating cypress, with a dignified posture, strong adaptability, strong wind resistance, smoke and dust resistance, fine wood texture, firm quality, water resistance, and is commonly found in temples, halls and courtyards. Wood is grease material, excellent material, straight grain, fine structure, corrosion resistance, is used in construction, vehicles, ships, bridges, furniture and appliances. Stembark fibers made of rayon and rope.

Leaves into medicine. Endangered Grade: National Key Protected Wild Plants.

Cypress is a precious timber species, mainly used for high-end furniture, high-end decoration of offices and residences, wooden handicraft processing, etc., and is a national strategic resource in short supply like oil. It is a multi-functional and high-efficiency tree species, and cypress is not only an excellent tree species suitable for selection in timber forests and ecological landscape construction; In addition, cypress is a tree species that can be used for the whole tree. It can also produce abundant chemical products, and the economic value of comprehensive utilization is very high.

The branches, leaves, trunks and roots of cypress can be refined into cypress oil, asphalt can be used as a variety of chemical products, and the broken wood after refining cypress oil from the roots is crushed into powder as a spice and exported to Southeast Asia with high economic value.

In addition, it is easy to process, the cutting surface is smooth and clean, and the brightness after painting is particularly good; It is easy to glue and has a strong nail grip. It is durable and durable, without damage for hundreds of years, and can be used as a manufacturing ship, called "cypress boat", which is not broken; In many classical buildings preserved in the south of the Yangtze River, cypress wood is mostly used for carved beams, foreheads, panes, screens, etc. It is also used as pencil shafts, toys, farm implements, machine models, musical instruments, etc.

Cypress is indeed a versatile, high-quality wood.

Due to the resin content of cypress, the wood dries slowly and is extremely resistant to decay. Whenever people step into the lush Berlin, look at its nine-curved branches, inhale the fragrance of the spleen, and think of the hardy and evergreen character of these thousand-year-old trees, it is very easy to purify people's souls. From this, we can see the situation when the ancients used cypress wood to make furniture.

The cypress is yellow, fine, fragrant, water-resistant, and has many knots, so the folk use it more to make "cypress baskets". The best coffins are also made of cypress, which is resistant to decay. The famous "yellow intestine inscription" in the tomb of the ancient king unearthed in Dabaotai in Beijing is a barrier formed by thousands of cypress squares neatly stacked.

It can be taken as aromatic and preservative.

All parts of cypress (branches, fruits, roots, and stems) contain oil. However, for the same tree species, the oil content varies depending on the age, site conditions, and harvesting season.

Hello dear, glad to answer for you:1Wipe off moisture from the surface of wet cypress:

When there is moisture on the surface of wet cypress, it should be wiped off immediately with a clean, soft cloth to prevent cracking. 2.The surface of wet cypress wood dries slowly

The surface of wet cypress wood should be gradually dried slowly to avoid sudden drying to avoid cracking. 3.Wet cypress wood surface is slowly warmed:

The surface of the wood should be heated slowly to reduce the possibility of cracking. 4.Spray water on the surface of wet cypress:

A small amount of water can be sprayed on the surface of wet cypress wood to inhibit the occurrence of cracking. 5.Grease the surface of wet cypress:

The surface of wet cypress can be coated with an appropriate amount of grease to prevent cracking on the surface of wet cypress. Thank you for your trust, the above is my reply, Gaoxin hopes to help you, I wish you a happy life

1. Always play with the handpan to avoid wind and sun, especially exposure! Try not to get wet. If you don't play for a long time, store it in a sealed bag.

2. Don't oil the wooden beads, if you have to put something on it, you can go to the beekeeper to find a piece of beeswax, and you can beat the beeswax when you don't play for a long time.

3. Also, if you accidentally get the bracelet dirty, try not to clean it, and wipe it with a soft and non-fading flannel cloth.

4. Try not to let the bracelet collide with a hard object, after all, it is wooden, not metal.

5. Since the bracelet will cause decolorization when it encounters alcohol, chemical solvents, etc., it should be kept away from alcohol, chemical solvents, etc.

Methods to control cracking of cypress boards:

If permitted, it is best to re-cut the thick plate into thin plates or small square lumbers for drying, which can effectively prevent end cracks and other drying defects.

Before the kiln is dried, the part that has been cracked is cut off, because the original end crack is easy to continue to extend.

Apply paraffin oil or thick paint to the ends of the boards where there is no end cracking to prevent water from evaporating from the ends.

When loading, the spacer at the end of the pile should be pressed as close to the end as possible and aligned up and down.

When loading the kiln, the end of the lumber pile and the timber pile should be as close as possible to prevent the air flow from short-circuiting the gap between the lumber pile, so as to avoid the end drying too quickly.

For hard hardwood or thick plates that are prone to end cracking, try to use a softer drying process, and pay attention to timely humidification treatment.

The way to prevent surface cracking is to not be too hard in the early stage of the benchmark, and pay attention to controlling the development of drying stress. Intermediate humidification should be carried out when the initial moisture content is reduced by about 1 3, because at this time the surface tensile stress may reach its maximum. For thick plate or hard hardwood, intermediate treatment should be carried out several times, either for every 10% reduction in moisture content or every 2 to 3 days to eliminate surface tensile stress.

Arborvitae logs will not crack if they are pre-steamed.

Wood drying.

Quality control begins from the moment the timber is transported into the factory. After the inspection of the specifications, size, material and moisture content of the wood, they will be put into the "drying room", and the moisture content of the wood will be adjusted by controlling the temperature and humidity of the drying room, and the wood with different initial moisture content will stay in the health room for different times, so as to achieve the moisture content of 8%-12%.

Wood health. After the wood has undergone an intensive drying process, it needs a period of relaxation, just like a human under heavy pressure, and the dried wood can be left to age naturally to restore its own balance.

The selection of timber is also divided into three, six, nine and so on, in the selection of materials and ingredients, the elimination of knots, internal cracks, blue change, rotten wood, end cracks and other unqualified wood.

Planing a good piece of wood, in addition to the natural beauty, also depends on the acquired carving and polishing. Once the craftsman has determined the material to be used, the wool sheet is coarsely planed.