What tools can be used to smooth the bottom of the groove when carving wood?

What tools are used for wood carving flat bottom, flat knives and cutting edges are straight, mainly used for splitting and smoothing the concave and convex surface of the wood to make it smooth and traceless. The large model can also be used to chisel large, with a sense of block surface, and the method of use, such as the brushstroke effect of painting, appears strong and powerful, vivid and natural. The sharp angle of the flat knife can engrave the line, and the blade foot or imprint pattern can be removed when the two knives intersect.

The wood carving figures in Sweden and the Soviet Union mostly use flat knives, which have a strong wooden taste.

The cutting edge is arc-shaped, mostly used for circles and round indentations, and is also very useful in carving traditional flowers, such as the round surface of flower leaves, petals and flower branches need to be shaped with a round knife. The transverse knife of the round knife is more labor-saving, and it can adapt to large fluctuations and small changes. Moreover, the lines of the round knife are uncertain, so it is flexible and easy to explore.

According to different uses, the model of the round knife should be different, and the size range is basically between 5 cm cm. The two corners of the knife edge of the round carving figure should be ground off and arc-shaped, otherwise when carving clothing patterns or other dents, not only can not be pushed, but also both sides of the dent road will be damaged. If you do relief, you should keep the two corners of the knife edge, and use the function of its corner tip to carve the corner of the ground, so it should be equipped with two types.

There is also a positive and negative difference between the round knife, the bevel is in the groove, and the back of the knife is straight for the positive round knife, it eats wood relatively deeply, and is most suitable for round carving, especially in the billet and excavation stage. The bevel is on the back of the knife, and the groove is straight for the reverse round knife, and the wood is relatively deep, and the knife can be walked gently or the ground is removed, and the use is greater in the relief. The shape of the round knife can also be made into an iron rod bend shape as needed, so that it can reach into the deeper part to dig the carved hole.

Cite. <>

Depends on what product you're making. 1: If it is a handicraft such as hardwood (mahogany), if it is not painted, first use a cloth grinding wheel to sand once, the cloth grinding wheel is relatively thick, generally about 120 meshes.

Later, it is hand-sanded with paper sand of No. 400. Then use a high-speed electric grinder to install a cloth wheel and polish it. 2:

If it is furniture, the procedure is relatively more complicated, before the sanding must be scraped with a scraper, the purpose of scraping the bottom is to scrape off the traces in the process of woodworking machine, and can make the pores of the wood more dense and smoother. Then it's up to you whether you want to paint or wax. Most of the power tools are high-speed electric grinders, and some people use hand electric drills to polish them.

There are many tools for wood carving and grinding, and large wood carvings need angle grinders, electric straight grinders, polishing and grinding machines, and angle grinders for small carvings.

An electric drill and an electric drill bit are required, and the specific operation is as follows:

1. First, use a screwdriver to loosen the electric grinding chuck counterclockwise, insert the flexible shaft and tighten the chuck.

2. Insert the grinding head to be used, and insert a wrench into the upper hole.

3. Then tighten the grinding head clockwise, pay attention to be tightened, so as to avoid accidents.

4. There are many grinding heads, and you should choose according to the shape of the groove you want.

5. Finally, clamp the wood in the fixed groove, and then open the electric drill to polish the groove.

Now there are many means of woodworking slotting, including:

1. CNC machine tools, you can open any version of what you want.

The shape of the groove, the lack of weight is the need for CNC machine tools, the cost is high;

2. The slotting machine can open regular grooves with high efficiency;

3. Manual chisel can open a variety of required grooves, but it requires skilled technology and high labor intensity.

(1) Use a small groove planer for woodworking to dig a groove on the long material of the finished cabinet.

2) According to the requirements of the groove width, you can use 2 points and 3 points of wooden file to file directly along the line according to the production requirements.

3) Wider grooves can be sawed with a carpenter's knife and saw, and then used a wooden file to cut out the depth along both sides of the line as required.

The tool used is, of course, clumsy, and only it can make grooves in the wood.

It depends on whether you want fine grooves or rough, roughly you can use an electric drill, first use a pen or knife to draw a boundary and then construct, and if you are fine, you must use carved wood knives.

It can be used, but it is not recommended As for the specifics, I have to ask my dad to go ==!

Use an electric drill to drill out the prototype, directly use a carving knife to make it thinner, then use a carving knife to process, and finally use sandpaper to polish.

Electric drills are not easy to master, use chisels and hammers.

It seems that it can only be carved, and the difficulty should not be small.