How can freshly cut mahogany not crack?

If it's very large, you can't do it for a short time. If it's not very big, you find a pot and boil it in salted water, then take it out and wrap it in a cloth, put it in a cool, dry place, and wait for it to dry on its own. This is the fastest way to do it.

1. Peach wood. It should not be placed in the scorching sun for a long time and cracked, so when placing it, you should consciously pay attention to it, especially not in the window.

2. Peach wood should not be placed in a very humid or dry room. In a very humid environment, some peach trees will grow "hair". If the environment is too dry, some mahogany handicrafts may partially crack.

Therefore, it is necessary to pay attention to the peach wood not to blow directly on the air conditioner. Also do not place near the heating pipe.

3. Peach wood should not be placed near open flames, fire walls, ondols, and stoves.

4. It is better to wipe with a towel with water, and it is better to wipe it with a cotton towel containing wax or grease. Usually, depending on whether the room is clean or not, you can reduce dust, and you can apply vegetable oil or bright oil from a paint shop on the surface. However, it is important not to wipe with a towel with water, which will make the peach wood handicraft too wet and will not achieve the desired effect.

Summary. The first step is to go through more than a dozen processes such as soaking, boiling, baking, drying, cooling, etc., and the processing cycle is as long as half a year, and it can be processed into handicrafts only when the wood is stable, so that there will be no cracks. You can also place the wet mahogany branches in a dry and ventilated place in a cool place to dry, and then choose a good peach wood to soak in water completely.

The soaked mahogany is boiled in water with caustic soda for 4 to 5 hours. Once the peach wood is boiled, soak it in water until it no longer absorbs water. Place the boiled mahogany billet in a cool, windless place to dry.

Naturally cool some of the moisture to make it basically set. Just place them in a ventilated and dry place to dry naturally.

The first step is to go through more than a dozen processes such as soaking, boiling, baking, drying, cooling, etc., and the processing cycle is as long as half a year, and it can be processed into handicrafts only when the wood is stable, so that there will be no cracks. You can also put the wet mahogany branches in a dry and ventilated place to dry in a cool place, and then choose a good peach wood to accompany Kai to finish the reed and soak it all in water. The soaked locust wood is boiled in water with caustic soda for 4 to 5 hours.

Once the peach wood is boiled, soak it in water until it no longer absorbs water. Place the boiled mahogany billet in a cool, windless place to dry. Naturally cool some of the moisture to make it basically set.

Just place them in a ventilated and dry place to dry naturally.

The processing of the second step peach handicraft includes the following steps: 1. The selected peach wood chips are completely soaked in water. 2. Put the soaked peach wood into caustic soda water and boil it over high heat.

Then continue to boil in boiling water for 4 to 5 hours. After boiling and fishing, immediately soak in water until the peach no longer absorbs water. 3. Put the boiled peach wood blank in a cool and windless place to dry.

Cool down some water from the water to make it basically set. Then dry naturally in a ventilated, dry, sleepy place. Fourth, the dried mahogany is reinforced and bundled into bundles to dry.

The treated peach wood has a beautiful color, no cracking, deformation, and no insects.

Summary. Dear, hello, walnut will crack, walnut is a strong hardwood with medium density, medium bending and compression resistance, poor toughness, and good hot pressing ability.

Dear, hello, Hu Kuxiao peach will crack, walnut is a strong hardwood with medium density, medium bending resistance and compression resistance, poor toughness, and good hot pressing forming ability.

The sapwood of walnut is milky white, and the heartwood ranges from light positive brown to dark chocolate with occasional purple and darker stripes. It can be ** sapwood thickened after steam treatment or without steam treatment. The tree grain is generally straight, sometimes with wavy or curly tree patterns, forming a decorative pattern that is pleasing to the eye.

Deciduous or semi-evergreen tree or small spilly tree, resinous, aromatic, surrounded by an orange-yellow shield family of round glands.

First of all, the easiest way to prevent cracking in mahogany; Soaking in water, protecting from the sun, or waxing regularly can all help prevent the peach from cracking. Secondly, first soak the fresh peach wood in water, soak it thoroughly and take it out, then put it in clean water and add caustic soda, then boil it over medium heat or high heat for four to five hours, take it out after boiling, and soak it in clean water immediately until the fresh peach no longer absorbs water. Then place the fresh mahogany in a cool place to air dry, then tie it into a bundle and wait for it to dry completely.