What kind of engine oil is good to change, and what kind of oil is good for the car

Go to the 4S shop to change the original engine oil. Or consider changing to Mobil, Total, Shell, or Gardes.

Mobil and Castrol are good, they are all big brands, you can take a look.

During the warranty period, you can go to the 4S store to use the original oil, and you can use Mobil, Shell, and Castrol in the later stage.

Hello! Choose from big brands such as Mobil and Castrol!

For the engine oils on the market, the quality of Castrol and Mobil is quite good.

The engine oil is not the same for different models, and generally natural aspiration and semi-synthetic can be used, while turbocharging requirements are relatively high and fully synthetic.

It is recommended to use Castrol EDGE Synthetic Engine Oil 5-30 once a year or 10,000 kilometers for maintenance.

Hello, the Castrol brand of engine oil is good.

Hello, this depends on what kind of car it is, and the type of engine oil used is not the same, so it is recommended to use the one that is common to all seasons.

In terms of engine oil, it is recommended to consider fully synthetic engine oil oil and ***.

If you want to change the engine oil of the vehicle, it is best to choose the original car manufacturer, which can be replaced at the SSSS shop.

This depends on what vehicle you belong to, and it is best to choose the original engine oil.

Changing the engine oil depends on the specific vehicle to choose, and it is best to use the original engine oil.

It depends on what your vehicle belongs to, and it is best to choose the original engine oil.

Different models use different engine oils, and it is best to replace them in line with the original model.

What kind of car you have is better to change the original engine oil.

Hello, this depends on what model you are, and then you can choose the oil.

Hello, what kind of car are you? It is best to change your own car model to the right one.

It depends on your specific model, what specific engine, naturally aspirated or turbocharged.

What kind of model does this look at? Different models of engine oil models are also different.

Hello, it is best to go to the local 4S shop for maintenance and maintenance according to the maintenance manual.

Each oil designation.

What kind of car are they suitable for? Which one is better? If you are a German car, Volkswagen and Audi.

The viscosity used in synthetic motor oil is basically 5w40, BMW.

0w40 is used more, and BMW uses 5w30 in synthetic engine oil. Generally, Mercedes-Benz new cars are 5w30, and the high power is mainly 5w40. Among American, Japanese, and Korean cars, 5w30 is basically the majority, and some of them require fully synthetic engine oil to be used from Subaru.

Mazda, Toyota, Honda.

0w20 for jeep, etc., or viscosity required by reference to the driver's manual. Among synthetic motor oils, 5w30 is a very cost-effective motor oil. The low-temperature starting oil volume and high-temperature oil film strength are almost close to 5w40, with a good sense of power and a certain degree of fuel saving.

German "gold", "lead" and "engine" titanium 5W30 are all in the synthetic engine oil, and the HTHS (high temperature and high shear viscosity) value is exceeded, which ensures higher oil film strength, reduces wear, and achieves better fuel-saving effect for large-displacement engines.

According to the use of the oil to decide whether it needs to be replaced, drop the oil on a piece of white paper, and then identify the oil use according to the oil color replacement judgment chart. With constant use, the oil will slowly deteriorate and be mixed with impurities.

1.Fully synthetic engine oil: Fully synthetic engine oil has better high and low temperature performance, longer oil change interval and is suitable for more severe car conditions, suitable for luxury high-performance vehicles, and is replaced at about 10,000-12,000 kilometers.

2.Semi-synthetic engine oil: The replacement cycle of semi-synthetic engine oil is generally about 8000-10000 kilometers, and the performance is moderate.

3.Mineral oil: This type of oil generally needs to be replaced after about 5000 kilometers.

Try to choose multi-grade oil, multi-grade oil has a better protection effect on the engine due to saving, long life and high efficiency.

You can try, hopefully.

Hello: At present, the engine oil on the market can be simply divided into 1Mineral oil 2

There are two kinds of synthetic oil, which can be divided into semi-synthetic engine oil and fully synthetic engine oil. The biggest difference between mineral oil and synthetic oil is that synthetic oil can be used at a wider temperature, has a longer service life, and has a higher cost; The same oil film requirements can be achieved with a lower viscosity of synthetic oil, while mineral oil needs to be more dense than synthetic oil to achieve this requirement.

In the same working environment, synthetic oil is more expensive because it has a much longer service life than mineral oil, but after comparing the number of oil changes, it is not much higher than mineral oil.

Engine oil is also lubricating oil, and the viscosity of lubricating oil is mostly marked by SAE and other grades, SAE is the abbreviation of the English "Society of Automotive Engineers". For example: SAE15W-40, SAE5W-40, "W" means winter (winter), the more the number in front of it, the better the low temperature fluidity of the oil, the lower the ambient temperature available for use, and the better the protection ability of the engine during cold start; The number after the "W" (after a horizontal line) is an indicator of the high temperature resistance of the engine oil, and the higher the value, the better the protection performance of the engine oil at high temperatures.

SAE) Applicable ambient temperature (°C): 5W external low temperature resistance -30°C, 10W external low temperature resistance -25°C, 15W external low temperature resistance -20°C, 20W external low temperature resistance -15°C, 30W external high temperature resistance 30°C, 40W external high temperature resistance 40°C, 50W external high temperature resistance 50°C

In this way, the applicable external temperature range of 5W-40 oil is from -30°C to 40°C; The 10W-30 oil is suitable for external temperature range from -25°C to 30°C.

Hope it helps!

Mineral engine oil, if the mileage of the vehicle is not much, 5000 kilometers in half a year, can ensure timely maintenance. Or if the displacement is low, non-turbocharged, economical vehicles, mineral oil is more suitable for you, which can not only meet the requirements of vehicle lubrication performance, but also make the maintenance of the vehicle more economical.

Semi-synthetic engine oil, it is a mixture of mineral oil and fully synthetic engine oil in proportion, and then add additives, the performance is better than mineral oil, it is a very balanced product, and the cost performance is good.

There are many factors to consider when choosing an auto oil, and there is no best, only the most suitable one:

1. There are many aspects to consider in the selection of engine oil: type, viscosity, temperature, vehicle age, brand, etc. Of course, brand and value have always been important attributes of goods;

2. The lubricating oil market is mixed, and it is generally difficult to distinguish the quality of engine oil based on appearance alone, and the principles of "you get what you pay for" and "brand represents quality" are also applicable to engine oil;

3. However, it should be noted that the choice of engine oil cannot be blindly good and expensive, and the suitable one that you can bear is the best. Of course, for base oils, it is definitely better to be synthetic than mineral;

Generally, it needs to be changed in three months or 5000 kilometers, and it can also be changed to Shell's all-season engine oil! When it is a good car, I change it to exclusive winter engine oil!

Mobil Total Synthetic is better.

It is good to replace the car with fully synthetic engine oil.

It's better to change the original engine oil.

Generally, the third oil filter or the second oil filter is replaced. Three-filter organic oil filter, air air filter and air air filter. Both filters are organic oil filter and air air filter.

Oil Triple Filter: The maintenance time of the oil filter varies depending on the oil used. Mineral oil and semi-synthetic motor oil, the vehicle oil change time is 6 months or 5000 km.

Synthetic motor oil for a year or 10,000 kilometers. Air air cleaners are generally replaced once a year. The gasoline filter replacement for different models needs to be replaced between 3-60,000 km.

Three water oil: three water: washing liquid, antifreeze, air conditioning drain drain; Three oils:

Fuel, engine oil, brake fluid, power steering fluid, automatic transmission fluid. Regularly inspect, clean, replenish, lubricate, adjust, or replace certain parts of automobile-related components. Hyundai auto maintenance mainly includes the maintenance scope of engine system (engine), transmission system, air conditioning system, Qiaoji cooling system, fuel system, power steering system, Hokuan Mintong, etc.

Millions of car purchase subsidies.

1.Generally, the replacement cycle of semi-synthetic or mineral oil is 5000-7500 km as a cycle, and the fully synthetic oil can be replaced at 8000-10000 km, and the oil filter should be replaced every time the oil is changed. Changing the oil too early will cause unnecessary waste, while prolonging the oil change will cause early wear and carbon deposits in the engine, and the oil will increase at any time and oxidize and fail.

2.It is best to change the oil at about 2,500 kilometers for new cars and vehicles that have just been overhauled, which will help to better remove metal debris generated by the engine during the break-in period.

When filling the oil, it should be noted that the amount of oil should not be too much or too little, and it should be between the "low" and "full" positions of the dipstick, and the oil level is too low to cause insufficient oil pressure; If the oil is too full, it will increase the running resistance of the crankshaft linkage and accelerate the formation of carbon deposits in the combustion chamber.

There is no specific number of how long the oil should be replaced, whether it is a motorcycle or a car, the length of the oil depends on what kind of oil is used, as well as the environment of the car, such as the use of ordinary mineral oil, which can be replaced at about 3,000 kilometers for normal commuting, and can be replaced at more than 5,000 to 10,000 kilometers using fully synthetic engine oil.

The steps are as follows: 1. Operate the first motor to make it reach the working temperature. Then use a jack to jack up the vehicle, pull up the hand brake and squeeze the front wheel with a wooden wedge;

2. Release the oil, there is an oil drain port under the vehicle, as long as the oil port is unscrewed, the oil can flow out, the oil color can be observed, the normal oil can be transparent, if it is black, it should be replaced in time;

3. Unscrew the oil filter element, the flow rate of the oil port slows down, at this time, you can unscrew the oil filter element for secondary release, the oil filter element is relatively troublesome to disassemble, you need to use a special filter element wrench, and then let the oil in the cabin run clean;

4. After the oil is all drained clean, you can replace the oil filter element, use the filter element wrench to install the new filter element, tighten it, and then tighten the knob of the oil drain buckle to put the car down;

5. Pour oil into the oil injection port, choose the oil suitable for your vehicle, select the capacity according to the displacement, pour the oil, and then pull out the oil dipstick to check whether the oil is enough.

6. Start the engine and listen to whether the vehicle has any noise, and then pull out the oil dipstick to check whether the oil is overflowing or to the lower limit.

It is recommended to follow the instructions for the wind-blown sand environment, generally 5000 kilometers. Normally, I think 6,000 to 10,000 kilometers is OK, my car has been driving for 20 years, and the engine has not broken according to this standard.

The reason for the poor oil change of the vehicle is to ensure the normal function of the engine oil and effectively protect the engine. The functions of the oil are as follows:

1.Lubrication reduces wear: The relative sliding between the piston and the cylinder of the starting machine causes wear and tear, and a thick oil film is formed between the two sliding surfaces to separate the surface of the relative sliding part and reduce wear.

2.Cooling: The oil brings heat back to the tank, which then radiates into the air to help the tank cool the engine.

3.Cleaning: The oil recycles carbide, sludge, and worn metal particles from engine parts back to the oil tank, and washes off the dirt generated on the parts through the flow of lubricating oil.

4.Shock absorption: When the engine cylinder pressure increases, the load on the piston, piston chips, connecting rod and crankshaft bearing suddenly increases, and the shock load on the bearing is buffered by load transmission and lubrication.