Can t you flash Redmi ? How does Redmi go into flashing mode

Redmi can be flashed.

The key need for flashing: there is a flashing package, you can enter the flashing mode to flash the machine.

Take card swiping as an example: use memory cards (SD, TF, etc.) to flash the machine, card swiping process:

3. Shut down, remove the SIM card, install the memory card, and it is recommended that the important things in the memory card should be backed up.

4. When shutting down, press the power button and the volume plus button at the same time, about ten seconds, and then let go.

5. Enter the recovery mode, i.e. REC mode.

6. Select Wipe Cache Partition to clear the cache.

7. After clearing the cache, select Wipe Data Factory and restore the factory settings.

8. Select "Install Zip from SDCARD", the power button is OK, then select Apply SDCARD:update, and the power button is OK, that is, select the flash package from the memory card to flash the machine, and wait patiently for it to be completed.

Hi! There is no suitable flashing package for the time being.

A more detailed description of the problem will help netizens understand the troubles you are encountering and help you solve the problem more accurately. Thank you for supporting Xiaomi phones!

Taking the Redmi note8 mobile phone as an example, the method to enter flash mode is as follows.

1. Take out the mobile phone, if the mobile phone is turned on, you need to turn off the mobile phone first, and press and hold the "power button" and "volume +" button of the mobile phone at the same time after the mobile phone is turned off, as shown in the figure below.

2. Wait for the interface of selecting the language on the mobile phone to release your hand, and then select the language you need to select, as shown in the figure below.

3. After selecting the language, the mobile phone will enter the vertical tease pin flashing mode, as shown in the figure below.

Method 1: If the phone is powered on, please turn it off first, and in the case of power off, press and hold the power (hang-up button) + small house (home) button at the same time until the recovery interface appears.

files, you can use the [Mobile Uncle Toolbox] software to brush off the dust, the specific method:

On the mobile phone that has successfully obtained root permissions, **Install the [Mobile Uncle Toolbox] software, use the [Mobile Uncle Toolbox] software, and flash the method steps of the third-party recovery mode:

1.Search for third-party files that match the signal of your personal mobile phone brand and model on the Internet (recommended mobile phone brand official website, Android Netjifeng Forum, and network disk), and copy and paste them in the mobile phone Qitong Zen SD card card root (card root: is to copy and paste directly in the SD card, and the file cannot be placed in the folder directory).

2.Successfully obtain the root permission of the Android system of the mobile phone.

4.Use the [Recovery] function of [Mobile Uncle Toolbox] [Import files on SD card] OK Reboot After restarting, it will automatically enter recovery mode and the flashing is completed.

Satisfied, don't forget to give it a go, thank you!

Method 2: If the above methods cannot be entered, then turn on the computer again, first press and hold the volume + button, and then press and hold the power power button until the recovery interface appears.

First, the computer installation brush machine big rock spike branch division. Coarse sensitivity.

Second, connect the mobile phone to the computer.

Third, choose to flash the machine with one click.