How to remove rust at homeThere are clever tricks, how to remove rust

1. Remove the rust from the kettle.

The kettle is very squeamish, because there is a brittle in it, and there is no small brush that can go through to the end, even if the length is enough, it cannot be brushed thoroughly. So, I found a very simple method, which is a plastic bag brush, and the effect is really good.

1) Fill the kettle with one-third tap water, a little less is fine. Find a regular plastic bag and put it in.

2) Block the spout of the pot with your hands and shake the pot vigorously. Be careful not to use anything else, just shake the kettle to make the water in it shake.

3) Shake for a few minutes, pour out the water inside, you will find that the water is full of rust, wash with clean water, pour out the water from the kettle, you can do it repeatedly. The rust in the kettle will be clean.

2. Rust in the kettle.

1) The pot that has just been boiled is the most convenient to brush, that is, the rust in the pot can not be dried to brush, gently wipe it with a steel wool ball or a loofah, and the rust inside will come down, just wash it with water.

2) The spout of the kettle is also a difficult part to brush, you can use chopsticks to wipe down with a small plastic bag, wipe back and forth, the rust will naturally gradually clean, pay attention to the rust brushed off in the pot with clean water.

How to remove limescale from an electric kettle.

1. Vinegar to remove scale.

This method is the simplest and most practical method, we all know that the main component of scale is calcium carbonate and other carbonates, the acetic acid in the vinegar will react with it, producing minerals and carbon dioxide gas dissolved in water, the general supermarket can buy white vinegar, put in the kettle scale of 10 white vinegar, and then fill with water, boil and leave for about an hour, and then brush it, aged vinegar can also be, but the effect of aged vinegar is not as good as white vinegar.

Second, the electric kettle boils the potato to remove scale.

In the new electric kettle, put more than half a kettle of yams, fill up with water, cook the yams, and then boil the water later, so that there will be no limescale. However, it should be noted that after boiling the potato, the inner wall should not be scrubbed, otherwise it will lose its descaling effect. For the old kettle that has been full of limescale, after boiling it once or twice with the above method, not only the original scale will gradually fall off, but also can play a role in preventing the accumulation of scale.

3. Baking soda removes limescale.

When the electric kettle boils water, it is easy to form scale, generally we can put 1 teaspoon of baking soda, boil for a few minutes, and the scale will be removed. Or you can pour about 500 grams of baking soda with a concentration of 1%, shake it gently, and the scale can be removed.

Fourth, boiled eggs to remove scale.

General electric kettle, with a long time of hard dirt is difficult to remove, such as boiling eggs twice with it, will receive the ideal effect, the two egg shells slightly broken, put into the bottle, and then fill half a pot of water, stir with a blender or spoon, and then boil, put for about half an hour, pour out the eggshell, and then wash twice with water.

1.Lemon descale.

Put the sliced lemons in the jug, bring the water to a boil, then wash the jug with dishwashing detergent and rinse with water.

2.Sodium bicarbonate descaling method.

Bring the water to a boil with an electric kettle, add 15 grams of baking soda and let it boil for a few minutes.

3.Descale the potato skins.

Put the potato skins in a kettle, add the appropriate amount of water, and cook for about 10 minutes.

4.Remove limescale with vinegar.

Pour the white vinegar and water into the pot in a ratio of 1:2 (250 ml of white vinegar is enough, that is, half a bottle of white vinegar) and turn off the machine after burning. Soak for more than 2 hours.

If it is a stainless steel kettle, it is best to use this method before going to bed at night, after boiling, it can be left to soak overnight, and the vinegar is poured out in the morning. After washing it several times with clean water, the kettle is completely clean. In the case of an aluminum kettle, bring the vinegar solution to a boil, leave it for 1 to 2 hours, and then rinse it.

5.How to descale boiled eggshells.

Boil the eggshells twice in a kettle, then wash the kettle with clean water and remove limescale.

6.Drink tea. The leftover tea leaves can also be used to remove limescale from the electric kettle. The method is to pour the tea grounds into the electric kettle along with the hot water. Shake it a few times, and after leaving it for half an hour, the limescale will fall off naturally. The principle is to descale with theophylline.

7.Sweet potato. Few people know the method of removing limescale from sweet potatoes, this method is very good, and it can be done once and for all.

Put more than half a pot of sweet potatoes in the kettle, and then add water to cook, and the kettle after boiling is not easy to scale. But it should be noted that after boiling sweet potatoes, do not scrub the inner wall, otherwise it will lose its descaling effect. If it is the old electric kettle that is fouled, you need to use sweet potatoes to remove the scale once or twice before the scale will gradually fall off, and then you can prevent the scale from accumulating again.

It's a good way to do it. You can try.

Life Hacks: Rust removal tips, just add it and get rid of it easily!

There are several main ways to remove rust:

1) Baking soda to remove rust.

Put 1 teaspoon of baking soda and bring to a boil for a few minutes to remove the rust.

2) Lemon rust removal.

Put the lemon slices into the kettle, the thinner the better, the purpose is to release the citric acid as much as possible, the water is boiled and boiled for about 5 minutes, and after boiling, let the lemon soak in water for 2 minutes to remove.

3) Vinegar to remove rust.

A few spoonfuls of vinegar can be put into water and boiled for an hour or two to remove the rust. Because the main ingredient in the rust is calcium sulfate, the soda ash solution can be poured into the kettle and boiled to remove the rust.

4) Ion exchange to remove water rust.

A specific cation exchange resin is used to replace calcium and magnesium ions in the water with sodium ions, and the solubility of sodium salts is high, so the formation of rust due to the increase in temperature is avoided.