-
1. If you are using bottled water, it is estimated that it is caused by the leakage of the bucket. The point of leakage is between the mouth of the bucket and the cap of the bottle. All bottled water is refilled.
There will be a certain degree of wear and tear on the barrel mouth during the filling process. It will affect the degree of sealing of the cap and the barrel mouth. So it is recommended that you still replace a bucket of water.
-
If the newly bought water dispenser leaks, this situation must be a defective product, you must go to their store or contact their after-sales service in time, and let them directly help you replace the new one.
-
Causes: The faucet is leaking, there is air in the bucket, and the inner tank of the water dispenser is damaged.
Solution: If you find a water leak, you should first look at whether the faucet is leaking, if so, you need to check whether it is a long time to use hot water to burn the junction, etc., if not, then replace it with a new faucet.
If you find that there is no leakage, but the water in the bucket is completely gone, in this case, there is air in the bucket. You need to check it, you need to see if there is air in the bucket, and then according to the pressure of the air of course the water will leak out.
Use and maintenance:
When moving the water dispenser refrigerated by the compressor, it should be kept upright as much as possible, and when it is to be tilted, its inclination shall not be greater than 45 degrees, and it should be stationary for a period of time after handling before it can work.
When using the water dispenser for the first time, clean the containers and pipelines of the water dispenser with clean water, then unscrew the drain valve, and tighten the drain valve after draining the remaining water in the machine. After adding a large bottle of water, turn on the hot water faucet, and then plug in the power supply and turn on the heating switch after the water flows out, so as to avoid dry boiling and prolong the life of the machine.
If the water dispenser is out of use for a long time, please turn off the switch of the machine and unplug the power plug, then unscrew the drain valve, drain the remaining water in the machine, and then tighten the drain valve (please pay attention to hot water scalding during drainage).
-
1. The leakage on the top of the water dispenser is generally caused by the rupture of the parts of the water purification bucket. The other is that there is a problem with the float of the water purification bucket, such as it cannot be sealed, but this situation generally does not happen. There is also a possibility that the water purification bucket is not properly placed and has air pressure, resulting in water leakage.
Maintenance method: Check whether the bucket is broken, if it is not broken, take it off and put it again or try to change the bucket of water.
2. There are two main reasons for the leakage of the smart seat of the water dispenser, one is that there are cracks at the bottom of the smart seat, and the other reason may be that the bucket is leaking, and there are cracks on the bucket that cannot be seen by the naked eye. Maintenance method: Replace the smart seat or bucket of the water dispenser.
3. The reason for the leakage of the water dispenser faucet is mainly due to the loose cover of the head end, the rupture of the internal silicone sleeve, or the internal impurities and scaling. Maintenance method: tighten the head cover, clean the impurities, if the problem cannot be solved, you can only replace the faucet.
4. The internal components of the water dispenser are leaking, the silicone pipe is broken, the weld of the hot tank and the cold tank is leaking, the electronic ice tank is leaking, the solenoid valve is leaking, and other maintenance methods: replacing the damaged parts of the water dispenserCommon faults and troubleshooting methods 1, the common fault of the water dispenser leakage or water dispensing machine is water leakage or no water, and the water leakage elimination is relatively simple.
If the water machine does not produce water, then the first thing to find out which level of filter element is blocked, the way to find is to disassemble the water inlet of each level of filter element one by one, you can find out which level of filter element is blocked, find the blocked filter element can unscrew the joint, shake it or directly connect the tap water backwash, see if there is a foreign object blockage at the joint, if it is not reinstalled, if it can not be solved, replace the filter element.
-
A water dispenser is a very convenient household appliance that can provide us with both cold and hot water. However, there are times when water dispensers leak. So, what's the deal with a water dispenser leaking?
First of all, it may be that the pipes of the water dispenser are aging. After the water dispenser is used for a long time, the pipes will wear and age, resulting in water leakage. The best solution is to replace the leaking pipe.
Second, the filter of the water dispenser's waterway system may become clogged or fail. If the filter is clogged or fails, the water pressure in the waterway system will increase, which may cause the pipes to burst or leak. Cleaning or replacing the filter can solve this problem.
In addition, the tank or heater can be damaged or ruptured, causing water leakage. In this case, the best solution is to replace the entire tank or heater.
Finally, the place where the water dispenser is placed may have leaky or wet pipes. If the environment around the water dispenser is very humid, then there may be a leakage of rental water around the water dispenser, causing water leakage. In this case, it is necessary to change the position of the water dispenser and dry the surrounding environment.
In conclusion, water dispenser leakage is a common problem, so don't panic when this happens. First of all, you can check whether the pipes are aging, whether the filter is failing, whether the water tank or heater is damaged, if it is not these problems, you can check the environment around the water dispenser for water pipe leakage, and then deal with it accordingly. As long as the problem is carefully investigated and dealt with in time, the water leakage problem of the water dispenser can be well solved.
-
1. Take off the bucket first, at this time, there is generally water inside the water dispenser, and then see if there will be water leakage, if it is not leaking after taking the bucket, then it is caused by the leakage of the bucket. When using the water dispenser, bottled water is basically used, and the leakage may be caused by the leakage of the bucket, because if there is a leakage, the leakage is usually the middle of the mouth and the bottle cap, so the position of the bucket mouth and the water dispenser will leak, and it is best to change a smart seat at this time.
2. If there will be water leakage after taking the bucket down, then there must be a problem with the inside of the water dispenser, so you need to check the outer cover of the water dispenser**There is a problem, if the water dispenser itself is not expensive, and it takes a lot of money to maintain, then it is recommended that you directly replace it with a new one.
3. If the water dispenser does not leak when it is not heated, and it leaks when the heating function is used, then it should be replaced with a heating thermostat.
4. If it does not belong to the above situations, then it is very likely that the one-way pavilion is broken, so you need to change one, and there are many water dispensers that are basically floating bad, if the floating is broken, you can change a float.
-
Reasons for water leakage in the water dispenser:
1. It may be that the bucket is leaking, you can remove the bucket, dry the surface, after a minute or two, and then wipe the surface with a paper towel.
2. It may be that the smart seat is leaking, remove the smart seat, check whether there are cracks, and reformulate if damaged.
3. It may be that the water pipe is damaged or the inner tank is perforated and the water leakage is recommended, and it is recommended to replace the water pipe and parts.
4. If the heating tank is ruptured and leaking, it is recommended to replace the heating tank.
Attention should be paid to the use of water dispensers:
1. First of all, before using the water dispenser, connect the socket and power cord as required, and repair it in time if it is damaged. In addition, the water dispenser should be placed in a well-ventilated place, and there should be no flammable and explosive gases around.
2. When going out for a long time, cut off the power plug to save electricity safely, and when using it, if you find that the water dispenser is abnormal, you should turn off the source in time and overhaul it.
3. When carrying the water dispenser, keep it upright, move lightly, and wait for a period of time before using it. In addition, if you find that the bottled water on the water dispenser is exhausted, you need to unplug it, notify the water delivery, and avoid dry boiling.
4. Before using the water dispenser for the first time, clean each container and then open the drain valve to drain it. And it is best to clean the water dispenser every 3 months. In addition, when using the water dispenser, try to avoid children playing around to prevent burns.
-
The reasons for the leakage of the water dispenser are the corrosion of the inner tank, the problem of the drinking water cover, and the leakage of bottled water.
1. The water dispenser has been used for too long, and the inner tank has been corroded, and there is a water leakage
The reason for the corrosion of the inner tank is that the alkalinity of the water is relatively large, which may cause the heating tank to corrode during heating, resulting in trachoma in the inner tank, resulting in water leakage after cleaning.
2. Drinking water cover problem
Water dispenser leakage because the water dispenser is in contact with the bottled water is a drinking water cover, this cover is directly in contact with the water dispenser's bottled water, if the cover is uneven, or damaged, then, the water dispenser will leak when in use.
3. It may be that there is a leakage of bottled water in the water dispenser
That is to say, there is a leakage between the bottled water and the bottle cap of the water dispenser, which will also lead to water leakage in the water dispenser.
Precautions for the use of water dispensers:
When buying a water dispenser, you must have a product grinding age certificate, do not be greedy to buy fake and shoddy goods, and do not forget to issue invoices, in case of accidents, you can protect your rights and interests through the consumer virtual state association.
Before going to bed at night or when there is no one at home, unplug the water dispenser or turn off the power switch, which is safe and energy-saving.
Water leaking from the safe ozone generator should overflow after the tank is full. It's the bucket on top that has a problem. Drain all the water from your water dispenser. >>>More
1. The faucet is broken.
If it is caused by a loose faucet, you can tighten it directly, and if it is caused by blockage, just disassemble and clean it. But if it is damaged, the faucet must be replaced. >>>More
Water dispensers sometimes leak in use, and the reasons for water dispenser leakage can be roughly divided into two points: >>>More
Reason 1: The reason for the water dispenser leakage may be the leakage of the drinking bottle. >>>More
It should be that the faucet at the hot outlet is broken, and the faucet is often aging when putting hot water. You can go to the water dispenser store and buy a different one of the same model. >>>More