Does the 2012 Corolla leave the factory only have a brake light

It is impossible to have only one brake light, a total of three brake lights, three left and right and high brake lights, I hope mine can help you, I wish you a happy car! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, according to the problem you described and our experience in repairing vehicles, each car has at least two brake lights, and even some cars have high-mounted brake lights, it is recommended that you check whether the other brake light bulb is damaged [There is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

All cars have two brake lights, one is only one bright, and the good-looking one should have burned out! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello owner, this is impossible, the brake light must be on both sides, some cars do not have a high brake light, the left and right are a must, I hope to be able to help you, I wish you a happy life [There is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

In 2012, there were 3 Corolla brake lights. Only fog lights and reversing lights pass one.

Hope mine can help you. If you don't understand, please continue to ask. Have a nice ride! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

It can't be, it's a broken bulb or a faulty wiring??? [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

The 09 Corolla brake light model is Qina T20,Toyota 09 Corolla headlight high beam model 9005, low beam model 9006, the original car supporting brand is Koito halogen headlights.

When buying light bulbs, you don't have to blindly pursue the original bulbs, as long as the genuine bulbs that meet the relevant national annual inspection regulations are slippery, we can choose to ensure that the vehicle is turned off, and the vehicle is in a cool state and then replaced to avoid burns**.

The role of the brake light

As the name suggests, the brake light is the tail light of the vehicle when braking, which is generally red, which plays the role of warning the vehicle behind, in addition, the brake light can effectively prevent the occurrence of rear-end collision events and reduce traffic accidents.

The brightness of the brake light is stronger, and it is more obvious, it is mainly used to remind the vehicle behind that the car should slow down or stop, if the brake light is used incorrectly or there is a problem, it is easy to cause a rear-end collision accident.

In addition, the replacement of brake bulbs should be noted, China's production of vehicle tail lights are generally a bubble for two purposes, there are two filaments in the bulb, the weaker one is the small light, the stronger one is the brake light, some manufacturers design it as a high and low foot plug-in, it is very convenient to use, and you must pay attention not to reverse it when replacing it.

09 paragraphsCorollaThe brake light model is T20,Toyota 09 Corolla headlight high beam model 9005, low beam model 9006, the original car supporting buried stool brand is koito halogen headlights.

When buying bulbs, you don't have to blindly pursue the original bulbs, as long as they meet the relevant national annual inspection regulations, we can choose the genuine bulbs to ensure that the vehicle is turned off, and the vehicle is in a cool state and then replaced, so as to avoid burns.

**。<>

The role of the brake light

As the name suggests, the brake light is the tail light of the vehicle when braking, which is generally red, which plays the role of warning the vehicle behind, in addition, the brake light can effectively prevent the occurrence of vehicle rear-end collision and reduce traffic accidents.

The brightness of the brake light is stronger, and it is more obvious, it is mainly used to remind the vehicle behind the bend to travel, the car to slow down or stop, if the brake light is used incorrectly or there is a problem, it is easy to cause a rear-end collision accident.

In addition, the replacement of brake bulbs should be noted, China's production of vehicle tail lights are generally a bubble for two purposes, there are two filaments in the bulb, the weaker one is the small light, the stronger one is the brake light, some manufacturers design it as a high and low foot plug-in, it is very convenient to use, and you must pay attention not to reverse it when replacing it.

There are 3 Corolla brake lights, one on the left and one on the left, and a high-mounted brake light. The brake light is generally installed at the rear of the vehicle, and the main color is a red light to enhance the penetration of the light source, so that the vehicle driving behind is easy to find the vehicle in front of the brake even in the case of low visibility, so as to prevent the occurrence of rear-end accidents. The following is the classification of car lights:

1. Headlamp, combined headlamp in the front of the car, it mainly plays the role of lighting and signaling. The light emitted by the headlights can illuminate the road conditions in front of the car body, so that the driver can drive quietly and safely in the dark;

2. Combined taillights, combined taillights are in the rear of the car, which mainly plays the role of lighting and signaling;

3. Turn signals, which are used to indicate left or right turn to other road users. The regulations require amber;

4. License plate lamp, license plate lamp It is mainly to illuminate the license plate, so that people can distinguish the vehicle license plate in the dark.

Toyota's 14 Corolla brake lights are two, one on the left and one on the left, plus a high-mounted LED brake light, which is visible from the cleaning in the picture below, as well as two reversing lights, a rear fog light, and two wide indicator lights. The high-mounted brake light is installed above the rear windshield so that the vehicle driving behind can easily detect the brakes of the vehicle in front of it, and the purpose of preventing rear-end collisions can occur. Because the general car has two brake lights installed at both ends of the tail, one left and one right, so the high brake light is also called the third brake light, the high brake light, the third brake light.

The function of the high-mounted brake light is to warn the vehicle driving behind it, so as to avoid a rear-end accident.

The 2008 Corolla brake light switch is in the center console, and the Toyota Corolla reversing light is installed at the rear of the car to illuminate the road surface behind the car, and warn the vehicles and pedestrians behind the car, indicating that the car is reversing, and the reversing lights are all white. When the transmission shift lever cuts into reverse gear, the reversing light illuminates.

The Toyota Corolla reversing light is installed at the rear of the car to illuminate the road behind the car and warn the vehicle and pedestrians behind the car that the car is reversing, and the reversing light is white in the corner. When the transmission shift lever cuts into reverse gear, the reversing light illuminates.

The Corolla reversing light is a wedge-shaped seat bulb (colorless) with a power of 16W. There are two Corolla reversing lights, the old Corolla is one, and the rear fog lights are only one, because the two rear fog lights are indeed easy to be confused with the brake lights, so in ECER 48 stipulates: if two rear reversal fog lights are configured, the position of the rear fog lights must be more than 10cm away from the brake lights.

So for the sake of aesthetic design, the new car began to use a fog lamp design.

The position is on the vehicle brake pedal, after the motor vehicle presses the brake pedal, the switch will be touched, and then the brake light will light up, in the process of motor vehicle use, the switch of the brake light does not need to be turned off, once the brake light is turned off, it will cause danger to the car.