How to distinguish a good bosom for a billiard cue What kind of maple wood should be detailed

Just roll on the table and you'll find out.

As far as the beating feeling is concerned, the beating feeling of the ash rod is direct, stable, and straight. Although the elasticity is good, it is more difficult to control than ash, which is the "thief" of maple as the saying goes. Therefore, the choice of maple rod should try to choose the maple forelimb with high hardness and crisp sound, so that the maple rod can be used to penetrate, and the rod force is stable and easier to control, but there are very few such maple rods.

If the chosen maple forelimb is dull to hit, the feeling of transparency on the shot will not be much better, and the white ball will not have a tail speed after the shot. There is no fun in playing with such a club. For people who are accustomed to maple, the top maple may be easier to play than ash, but the average or low-end maple is far worse than ash in terms of stability, so there will be few users of maple.

Players who use ash clubs abound, and most of them make ash clubs. There are very few golfers who use maple clubs, and the well-known players are: Stephen Hendry, Maguire, Fu Jiajun, Stephen Lee.

Ash wood and maple are the most common two kinds of club forelimb materials, and the characteristics and differences between these two kinds of wood are obvious: from the outside, ash wood has obvious texture, maple wood has a solid color without texture, ash fiber group staggered similar to a hybrid structure, good directionality and very stable. The fiber structure of maple is evenly arranged and has no obvious directionality.

The shrinkage of the ash rod will produce slight concave and convex textures, and the maple rod is easy to deform, not resistant to dirt, and not easy to maintain.

The beautiful arrow pattern of the ash rod can assist in aiming; The maple wood is a solid color throughout, and golfers who are used to aiming directly with the shaft will feel good. Maple poles are more affected by the climate and environment than ash poles, and the maple poles will be sticky in dry places in winter and wet places in summer, and the feeling of maple poles will change greatly in climate change, and the force feedback of the batter will be different.

Maple is harder, precisely because it is harder and the ball is not slippery enough, Hengde uses maple clubs.

Ash wood has good elasticity, and most professional players choose it, and the ball is relatively slippery.

That is, the pole of maple is relatively hard, the elasticity of ash is slightly better, maple is not easy to control, it is recommended to buy ash, of course, if you like to use a hard rod, and you like maple then maple.

Maple has a good degree of finesse and is very good around the ball

Ash wood is tougher and has a pointed beak to help with aiming.

1. Excellent pinning: high hardness, crisp sound, stable and easy to control.

2. Disadvantages: maple rods are easy to deform, not resistant to dirt, and difficult to maintain.

The texture of a maple billiard cue can affect its hardness, but this effect is relatively small. The pattern is formed by the arrangement of maple fibers, and the arrangement of these fibers is different, which will affect the hardness of the rod.

The longitudinally arranged fibers can increase the hardness of the rod because the longitudinally arranged fibers resist the bending and twisting of the rod. However, since the strength of the rod is also affected, if the fibers are arranged too tightly, it may lead to an increase in the brittleness of the rod.

The transversely arranged fibers can make the rod less stiff because they are not resistant to the bending and twisting of the rod, but instead cause more bending and twisting. However, the transverse fibers are spaced far apart, which increases the impact resistance of the rod.

Therefore, the grain has a certain impact on the hardness of maple billiard cues, but the effect is not absolute, and is also affected by other factors, such as the length, diameter, surface treatment of the rod, etc. Therefore, when choosing a maple billiard cue, players do not need to pay too much attention to the influence of the texture, but choose the factors such as the length, thickness and weight that suit them to improve the stability and accuracy of the high strike.

The texture of maple billiard cues affects the hardness, which is a more complex problem. First of all, the texture of the maple billiard cue will affect the hardness of the billiard cue, because the grain will affect the elasticity of the billiard cue, which will affect the hardness of the billiard cue. Secondly, the texture of maple billiard cues will also affect the tensile strength of billiard cues, which will affect the hardness of billiard cues by imitating tremor.

Finally, the texture of maple billiard cues can also affect the bending force of the cue, which in turn affects the hardness of the cue.

To solve this problem, first understand the grain of maple billiard cues and how they affect the hardness of billiard cues. Second, determine the texture of maple billiard cues and how they affect the hardness of billiard cues. Finally, adjust the hardness of the pooling cue based on the texture of the maple cue and how they affect the hardness of the cue.

In short, the texture of maple billiard cues will affect the hardness of billiard cues, to solve this problem, you need to understand the texture of maple billiard cues, and how they affect the hardness of billiard cues, and adjust the hardness of billiard cues based on this information.

The texture of a maple pool cue does have an impact on its hardness. In general, the hardness of billiard cues depends on the density and texture of the shaft. The higher the density, the higher the hardness.

The grain will affect the strength and stability of the pole. Maple cues are usually straighter, which means that the wood is relatively stable and less prone to bending or twisting. In contrast, other woods such as persimmon have more complex textures, and the stems are relatively soft and easy to deform.

Therefore, if you want to choose a billiard cue with higher hardness and good stability, maple rods are a good choice for abrasion. Of course, different people will have different preferences and needs, and you need to choose the right pool cue for you.

Maple billiard cue texture often has an impact on hardness. Hardness refers to the ability of an object to resist deformation or scratches. When making billiard cues, the direction of the reeds will affect the hardness.

Since each piece of wood has a different grain direction, special attention is required during the production process. Most tape count manufacturers control the hardness of the rod by selecting, grading, matching the wood, and polishing it thoroughly. It is important to note that regardless of the texture of the material, the hardness of the cue is related to the quality of the material chosen, the processing method, and the flame sensitivity of the surface.