What is the shape of the nine ball billiard cue head?

I've eaten Wangzai's small steamed buns, it's similar to that, but the vertical arc on the side is smaller.

In fact, this has a very standard data, if the plastic corner is 13mm, then the thickness of the skin of the head of the club is 6mm-8mm, the most central dot is 3mm, and then according to the way of the parabola outward to the outside, the height of the parabola is consistent with the plastic angle is to ensure the thickness of 4-5mm, if it is a 12mm plastic corner, then the center of the leather is 2mm, if it is the plastic corner, then it is the leather dot. According to this parabolic principle, you can do it.

The brother above is absolutely right, which is the arc of a dollar coin.

I also heard that in Taiwan (Taiwan's nine-ball development is good), there are still people who repair the cue leather head into the arc of 5 cents coin, to be honest, I have never seen what Taiwanese 5 cents look like.

Anyway, in China, the leather head is repaired to the arc of an RMB one-dollar coin.

The curvature of the one-dollar coin is just right.

The diameter of the head of the nine-club club is generally 11mm-13mm.

For a small Chinese table, hard maple with a diameter of the head of a nine-club club is a good choice for accuracy, and it is used by a large number of people. However, the nine-ball club at the head of the club is a bit thin, and the forelimbs are easy to tremble, which affects the accuracy and is not very easy to move when hitting the ball.

The clubhead of a nine-cue above 12mm can play the most magical effect, but due to the special nature of the Chinese-style small table, players who choose a nine-cue above 12mm need to have a certain advantage in accuracy.

A nine-ball cue (also known as a pool cue) is a cue designed specifically for the freestyle nine-ball game.

The nine-club is composed of a leather head (club head), a first angle, a decorative ring (commonly known as a skid's ring), a nut (only a lock tooth), a wooden rod, a middle wheel, a joint tooth, etc.

The tip of the cue club is the leather head. The diameter of the leather head is about 12mm-14mm, and the diameter of the leather head of most fancy clubs is 13m-m.

The white part under the leather head is the first angle, which is used to protect the front end of the front section, that is, the thinnest part of the front section, and the other function is to make the skin head stick on it to achieve the purpose of hitting the ball.

The middle wheel is a small section at the top of the back section of the club, and the materials are stainless steel, bakelite, plastic steel, etc.

The buckle of the anterior and posterior segments is called the joint.

The head of a nine-club club is typically millimeters in diameter.

Billiards is an elegant indoor sport that is widely popular in the world, and it is an indoor entertainment sport that uses a cue to hit the ball on the table and relies on the calculation of scores to determine the outcome of the game. Billiards is also called billiards (the name of Guangdong, Hong Kong and Macao) and pool (the name of Taiwan). Originally billiards were made of wood, and later ivory appeared.

Summary. Follow the goal:

Also known as the "high pole", hold the rod horizontally and hit the upper middle, left or right point of the main ball, that is, use the middle and high rod and left.

High or right high bar. The cue ball follows the target ball in front of you, in front of the left, and in front of the right. When hitting the ball, use the power of the forearm and shake the wrist at the same time, so that the main ball will move forward at the moment when the main ball collides with the target ball.

Pass to the target ball, which starts to move forward, and the cue ball comes to a moment's notice of stopping in place, and then.

Relying on the upward rotation force that it has preserved, it follows forward quickly and travels a long distance. In order to grasp accurately.

For different follow-up distances, four or five balls can be placed at different distances on one side of the forward route as a marker, from near.

Practice step by step, and when you can achieve the distance you want to follow, you will be considered qualified.

2) Push the ball:

Hold the stick horizontally and hit the center point, center left point, and center right point of the main ball, that is, use the center stick to hit the ball when hitting the ball. When hitting the ball.

Mainly rely on the forearm to move back and forth and move the wrist to push the club out. When the cue ball collides with the target ball, the target ball.

Forward, the cue ball also follows the target ball at the same time, slowly moving in the same direction, and after a certain distance, it slows down.

Stop slowly, that's the way to push the ball.

What are the methods of setting up billiards nine balls?

Hello, I have seen your question and am sorting out the answer, please wait a while

Can I use an auxiliary pole in a nine-ball match?

Follow the goal: also known as the "high club", Lu Yin holds the stick horizontally and hits the upper middle, left or right point of the main ball, that is, the medium high club, the left high club or the right high club. The cue ball follows the target ball in front of you, in front of the left, and in front of the right.

When hitting the ball, it is necessary to use the power of the forearm and shake the wrist at the same time, so that the moment the cue ball collides with the target ball, the cue ball transmits the forward force to the target ball, and the target ball begins to move forward, while the cue ball is more obviously trembling in the same place for a while, and then relies on the upward rotation force saved by itself, quickly follows forward, and the distance of progress is longer. In order to accurately grasp the different follow-up distances, you can put four or five balls as markers at different distances on one side of the forward route, and practice step by step from near to far. 2) Push the ball:

Hold the stick horizontally and hit the center point, center left point, and center right point of the main ball, that is, use the center stick to hit the ball when hitting the ball. When hitting the ball, it mainly relies on the forearm to move back and forth and drive the wrist to push the club out. When the cue ball collides with the target ball, the target ball advances, and the cue ball follows the target ball at the same time, slowly moving in the same direction, and after traveling a certain distance, it slowly stops, which is the play of the propulsion ball.

What's that? Sidestep the question.

Goals, pushes, set-pieces, catch-ups and double balls.

I'm asking if I can use a pole?

My first question is your first question.

No. When I send it to you, it won't send it.

1. Weight and center of gravity. The handy weight is that you pick up your club and have the urge to play, and those who don't have special requirements for weight can choose an 18-ounce club, and a slightly lighter club makes it easier for you to grasp the feel of the ball. Many domestic club production is not standard, resulting in a large deviation of the center of gravity, some manufacturers use wood without standard production procedures, the counterweight of the rear so that the center of gravity is too forward or back.

This kind of club is very much affected by your normal power! And it will make you lose control of the strength for a long time. So from this point of view, when we choose a club, we should try to choose a club produced by a regular manufacturer.

Although they use other people's technology and equipment, it is reasonable in terms of production standards.

2. Test the softness and hardness of the club. Some people may not know how to choose the hardness of the club. Sui Ming doesn't just break it by hand.

Usually maple clubs are softer than oak or oak (both have patterns). The hardness of a patterned club depends on the density of the shaft, and the denser the pattern, the harder the shaft. If you are more interested in the pattern, it is best to choose a club with a straight pattern and no scars.

3. Test the toughness of the rod. This will directly determine the power transfer effect of your club! Method:

Hold the center of gravity of the club with one hand, and leave the club with the other hand after tapping the club tail, feel the flutter of the club head, the tenacity of the club shakes evenly, the time is long, and the power of the flutter is from the inside out. Or hold the tail of the club, and hit the center of gravity with a little heavier strength with the other hand, so as to feel the flutter of the club (here is another point: the faster the frequency of the flutter, the harder the club, and vice versa) Don't worry, feel more, compare a few more clubs, you will be distinguished by the very Ming Seepage family, in order to take advantage of the club, don't be afraid of trouble and time-consuming.

4. Test the workmanship of the cue. Mainly check whether the copper head of the club is loose, whether the interface of the front and rear branches is concentric, and there is no gap after tightening. Whether the club is smooth (many clubs are no longer painted, and you don't need to use sandpaper to buy them back, which can greatly reduce the chance of club deformation).

The hardness must be hard enough, hard enough to reduce the deformation of the club when hitting the ball, so that the hitting point is accurate and not easy to make mistakes.

The elasticity must be suitable, everyone's mana is different, everyone's accustomed power is different, and the elasticity must be suitable for the individual, otherwise you can't control the cue ball well.

Although each club has a different center of gravity, the center of gravity of the club is not very different, and it should be at the first point that the master of the club thinks, that is to say, the club will not feel too heavy in front or too heavy in the back.

The transmission of force must be good, because the cue is to transmit the power and force of the hand to the cue ball, and the feedback is not good if the transmission is not good, which will affect the effect of the ball.

The power should be appropriate and comprehensive, and the club will provide you with whatever power you need.

WeightIt is important to find a club with the right weight, because the heavier the club, the slower the speed, this varies from person to person, depending on the individual's hand.