What should I do if my phone gets into water? What should I do if my phone gets into water?

Unfortunately, if you are using a Huawei mobile phone, in order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Repair spare parts** inquiry.

Make an appointment for service. Boarding service.

If you use an OPPO phone after water or liquid ingress, in order to avoid further damage, it is recommended to deal with it according to the following methods:

1.Judge the power on and off status of the mobile phone, if the mobile phone is turned on, please turn it off immediately, if the mobile phone is turned off, please do not try to turn it on;

2.Take out the SIM card and memory card of the mobile phone in time, and remove the battery if the mobile phone is a removable battery;

3.Use a paper towel or cotton swab to dry water stains on the surface of the mobile phone;

4.If it is not cleaned after liquid ingress, it will accelerate the oxidation and damage of the internal components of the mobile phone, so it is recommended to send it to the customer service center for testing and repair as soon as possible.

Notes:1Please do not turn on or charge the phone after water ingress, at this time, powering may cause short circuit damage to the components of the mobile phone;

2.Please do not try to shake off the moisture by shaking the phone, this operation may cause the liquid to seep into other components;

3.Please do not use a hair dryer or oven to bake your phone, as high temperature and high heat may cause permanent damage to the components of the mobile phone (after the moisture inside the mobile phone is heated into water vapor by a hair dryer, etc., it may penetrate into other components of the screen, which will cause the mobile phone to get wet and damage the electronic components).

Step 1: Shut down.

After picking up your mobile phone, you should press and hold the power button to turn off the power button as soon as possible, because water will slowly seep into the circuit, and it is easy to cause a short circuit in the mobile phone when it is turned on.

Article **1 Step 2 Ventilation.

In order to avoid more damage to the phone, quickly wipe the moisture on the phone with a paper towel, and do not let go of the charging port and earphone port, then take out the SIM card and memory card, and place the phone in a dry and ventilated place. The "put the mobile phone in the rice to dehumidify" circulated on the Internet, or try not to be gullible In case the mobile phone is not saved, the charging port is also blocked by the rice, and the gain outweighs the loss However, in case the moisture in the mobile phone is not cleaned up, it may cause damage to the mobile phone device after turning on, in order to reduce the risk, it is better to go to the after-sales inspection Kangkang

Article **2 The third step is to go to after-sales.

If the phone is flooded with a lot of water, or other mixed liquids, such as seawater and vegetable soup (salty liquids), even if it dries, it will still accelerate metal corrosion after being wet, and must be cleaned up

Precautions after the mobile phone gets into water.

Do not move or shake your phone frequently after entering the water, so as not to spread the moisture inside the phone and cause more damage.

Do not blow with a hair dryer or bake at high temperatures after water is in, so as to avoid liquid being blown into the phone and damage the phone by high temperatures.

The mobile phone reaches the waterproof level of GB 4208-2008 (Chinese standard) IEC 60529 (international standard) standard when it leaves the factory, but it is not permanently effective, and the bumping, squeezing, and falling in daily life may weaken the ability to resist splash and water, so try to avoid contact with water sources during the usual use of the mobile phone.

Remove the water first, and dry the phone in time. We found that the phone had fallen into the water, and we scooped it up in time. Quickly wipe off all the moisture on the fuselage and remove the soft rubber case of the mobile phone, because the soft rubber case will get stuck in the water.

If the phone is turned on at this time, we need to turn it off in time. Avoid powering up the phone and burning the internal parts. If it's an old-fashioned phone, we can remove all the back cover, battery, etc.

This avoids electricity and allows moisture to flow faster.

Use a cotton swab or paper towel to quickly drain the water in the earphone hole and the water in the charging hole. After the phone gets into the water, take out the battery immediately, and then open the case and use a hair dryer to blow it clean.

After all the water absorption we could do, we still couldn't turn it on. If you want to put the mobile phone in a ventilated place or put the mobile phone in a rice bag for 3 days, and it still can't be turned on after the above methods are over, then the motherboard is burned out and needs to be replaced by yourself.

Turn it off, use a hair dryer, blow dry, and then start it to give it a try, if it doesn't work, send it to the repair shop for processing, otherwise there is a high probability that it will not be used.

The first step is to clean up the surface moisture, turn off the machine immediately, and then shake the water as much as possible; Finally, if it is not seriously left to air dry; If there is a lot of water, immediately get the after-sales disassembly for maintenance.

The phone got into the water, dried it and put it in the sun. Don't hit **, don't turn it on.

1. Observe whether the mobile phone is standby.

If the mobile phone falls into the water, it must be fished out in time, and after it is fished out, it is necessary to observe whether the mobile phone is still in standby mode. If the phone has been automatically turned off, do not force it on, it will cause damage to the battery, the correct way is to buckle the battery.

2. Disassemble the phone to dry.

As mentioned above, it is far from enough to remove the battery of the mobile phone, sometimes we look at the mobile phone is not very much water, as everyone knows, although the moisture is small, it is enough to corrode the motherboard or other important parts. At this time, try to open the outer cover of the mobile phone and dry it.

3. Wipe with something that absorbs water.

If the moisture is visible to the naked eye, or within the touchable range, it is necessary to wipe it with absorbent paper in time, and be careful not to wipe it with something too sharp, so as not to wear out the internal environment of the mobile phone. In doing so, the phone will be completely scrapped.

4. Use a hair dryer to dry.

The hair dryer can make the water inside the mobile phone volatilize quickly, and professional mobile phone repair masters know that exposing the mobile phone to the hair dryer, using the hot air setting, blow slowly and carefully. If the power of the hair dryer is high, blow far away. Be sure to make sure that the moisture is thoroughly dried.

Don't be in a hurry.

5. Put the mobile phone into the rice bowl.

There are many things that have a strong ability to absorb water, but rice is a relatively common thing that every household has. It is recommended that if the phone is too wet, you can put the phone into the rice jar and then seal it. Take it out overnight and see if the phone can be used normally.

6. Send the mobile phone to the after-sales service.

If none of the above methods can be put on your solution, then you can only send the phone to the repair shop for repair, even then the phone may not be completely repaired, the mobile phone that has been in the water more or less has a watermark, or some keys are not working, so we should take care of our mobile phones in our daily life.

After the mobile phone enters the water, do not operate the mobile phone and buttons, control the water, use a hair dryer to dry, and then take it to the sun to dry, and it can be turned on after 30min.

1.Please try to place your phone in a dry and ventilated place and use a paper towel to blot water stains on the surface of your phone.

2.If the phone is powered on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3.Please remove the SIM card and microSD card.

4.Please bring your mobile phone to the mobile phone customer service center for testing and processing as soon as possible to avoid unnecessary losses.

If there is not much water intake.

1.Wipe your phone dry with a napkin.

2.Put the phone in the rice, and after a while the rice will absorb the water in the phone.

Be careful not to turn your phone on or off when it is wet.

Vivo mobile phone liquid inlet treatment method:

1. Don't force it on, it is likely to cause a short circuit in the phone;

2. Don't shake the phone hard;

3. Don't heat up your phone;

4. Blot the liquid on the mobile phone, you can use toilet paper and other tools to absorb the water in the gap of the mobile phone, and absorb the water in the mobile phone as much as possible. When absorbing water, try not to move your phone;

5. Place the mobile phone in a ventilated and dry place, and let the excess moisture on the surface of the mobile phone air dry naturally;

6. Customer service center processing, customer service center address: enter vivo official website vivo**app--my-service outlets or vivo official website web version--bottom of the slide--service support--service outlets query--select provinces and cities to query the address of the customer service center. It is recommended to contact ** in advance before going to avoid empty running, plan the itinerary reasonably, and travel safely.

The first trick: "paper towel + cotton swab" water absorption method.

After the mobile phone enters the water, the most direct and effective way is to use the paper towel and cotton swab to absorb water, the paper towel is responsible for a large area, and the cotton swab is responsible for a small area. Start by wrapping your phone in a paper towel and quickly blot the water on the surface. After that, use a thin cotton swab to clean the earphone hole, charging wiring hole and other parts to avoid external moisture penetration.

The second trick: rice water absorption method.

Rice may seem common and inconspicuous, but it also has a powerful dehumidification and water absorption function! Stuff the watered mobile phone into a bag with rice, seal and store it for more than 24 hours, as long as the mobile phone is not in water for a long time, it can be restored to use and turned on normally.

The third trick: desiccant water absorption method.

Usually, you can prepare some desiccant or drying box in case of emergency. There will be some small packets of desiccant in some of the goods I usually buy, which can be used, collect these small packets of desiccant, and then seal the soaked mobile phone with them, the effect is very good

If the mobile phone is flooded, the first time is to wipe the water on the surface of the mobile phone, and then put it in the ventilation to dry, and then check whether the mobile phone can be used normally after a few hours!

1. Don't force it on, it is likely to cause a short circuit in the phone;

2. Don't shake the phone hard;

3. Don't heat up your phone;

4. Blot the liquid on the mobile phone, you can use toilet paper and other tools to absorb the water in the gap of the mobile phone, and absorb the water in the mobile phone as much as possible. When absorbing water, try not to move your phone;

5. Place the mobile phone in a ventilated and dry place, and let the excess moisture on the surface of the mobile phone air dry naturally;

6. Customer service center processing: enter the vivo official website vivo**app--my--service outlets, after-sales outlets--select provinces and cities to inquire about service center information.

**Link.

Fish out the phone that accidentally fell into the water first, and use a paper towel to absorb the surface moistureNote that the earphone jack and charging socket part are used with a cotton swab or a thin strip of toilet paper rolled into a thin strip of paper to suck up the water, it is recommended to use a hair dryer to blow for more than 15 minutes, and it is best to leave the phone for more than 5 hours after drying it before trying to turn it onCons:

Due to the different parts of the water ingress, this method is risky and may cause damage to the motherboard of the mobile phone, so be cautious!Notes:Do not use the hot air function of the hair dryer, the conductivity of the water and the high temperature of the hot air may cause the battery interface to leak or the internal circuit to short circuit and burn the phone

If the water ingress of the mobile phone is serious, you can clean the water on the surface of the mobile phone first, and then send it to the after-sales service for repair.

First of all, if it is a local water ingress, you can wipe it with alcohol paper, prepare a bag, put the mobile phone in it, put it in the rice bag, and leave it overnight. It is better to cover the phone. If this method does not work, it is recommended to go to a mobile phone store for repair.

If the phone is flooded, don't turn it on, first dry the water on the phone with a hair dryer, the best way is to put it in the sun for a day, and then turn it on.

Change the kitchen knife, change the pot, change the hanger.

Let's take a look at the methods that we usually use, after many people's mobile phones fall into the water, the first time is to take out the mobile phone and blow it with a hair dryer, and it is blowing on the opening of the mobile phone, thinking that it can be dry by blowing, in fact, the mobile phone itself is waterproof, under normal circumstances, a short period of soaking in water, it will not penetrate into the motherboard, since it will not go to the motherboard, there is no big problem.

However, if you use a hair dryer to blow it, it will cause water droplets to be forced to the motherboard, which is full of hardware and various wiring, and once it encounters water, it will definitely cause a series of problems such as short circuits. But it's not that you can't use a hair dryer, it's that you haven't mastered the method.

The correct way is to first place the hole of the mobile phone, that is, the place where the mobile phone enters the water, vertically downward, so that the water comes in from the **, after fixing the mobile phone, use a hair dryer to blow from the non-porous place to the place with the hole, so as to avoid bringing water droplets to the motherboard, and you can also heat the mobile phone to a certain extent to accelerate the evaporation of the water inside, but the temperature should be controlled well, and the mobile phone should not be excessively high. In addition, the phone is turned off during the whole process.

This is just an indoor practice, if the outdoor sun is very good, it is easier to do, wipe it with paper, and then fix the phone vertically according to the above method, and put it in the sun to expose it, but this process does not need to be turned off, but the whole process is turned on, and the speaker is turned on to the maximum. Wait 15 minutes to 30 minutes.

The principle of this is very simple,Vertical placement of the mobile phone will not let the water droplets flow to the inside of the mobile phone,Exposure to the sun is to accelerate the evaporation of internal moisture,The last speaker is more important,Although the sound of the speaker is not as good as the sound,But we are not for listening**,But in order to bounce the moisture away from the speaker through the speaker vibration,You can also accelerate the flow of air through sound waves,So as to take away the moisture。