There is a small hole at the bottom of the freezer except for running water, can you gamble when the

Can be blocked.

The drain hole at the bottom of the freezer is used to drain the ice water that melts inside the freezer. It should be blocked when used to avoid air leakage from the air conditioner and contamination of the food in the freezer. It should only be opened when the refrigerator is clean or when the frost is melting.

In order to drain water from the refrigerator, it is recommended to plug the drain hole with a rubber plug during normal use.

If the freezer has the function of automatic defrosting and ice melting, it is recommended not to block it to avoid that the melted water cannot be discharged smoothly out of the freezer during the process of defrosting and deicing, resulting in freezing and contamination of the food at the bottom of the freezer.

The refrigeration principle of the freezer

Vaporization (the transformation of a liquid into a vapor) is the absorption of heat; Liquefaction (vapor into water) is the release of heat, and it works on the same principle in both refrigerators and air conditioners: (low temperature and low pressure) refrigerants.

Gas) Compressor (liquefied) Liquid refrigerant (high temperature and high pressure) Radiator (heat is released from the surface of the refrigerator) Liquid refrigerant (low temperature and high pressure).

Capillary evaporator inside the refrigerator.

The copper tube around the inner wall of the box) gasification, that is, heat absorption, the temperature in the refrigerator will drop (gasification), refrigerant (low temperature and low pressure), and the compressor will move the heat in the box out at the price of refrigerant.

I am a professional repairer of refrigeration equipment, the original hole was originally blocked, no need to open, the running time is long, there is too much ice in the box, manual defrosting, after the ice turns into water, you can release the water out, and it is blocked when you use it.

The drain hole is blocked.

The drain at the bottom of the freezer is used for defrosting and is closed with a sealed lid for daily use. Once there is water in the freezer, you can pull out the lid and drain the internal water to avoid water freezing and affecting use.

Therefore, the drainage hole must not be blocked, otherwise it will affect the use, and it will also cause the ice in the drainage pipe to melt in time, affecting the refrigeration problem.

Consequences of clogged drain holes in the refrigerator.

1. Overflow. In general, the refrigerator drainage hole may be because when the food is refrigerated, the food residue enters the refrigerator drainage hole, resulting in the blockage of the refrigerator drainage, so that the water in the refrigerator can not be discharged smoothly, and the phenomenon of overflow will occur inside, affecting the normal use, and there will be different degrees of water accumulation on the ground.

2. Affect the freshness of food.

When the drain hole of the refrigerator is blocked, then the inside of the refrigerator cannot drain smoothly, so the gas inside cannot be exchanged normally, the whole refrigerator is in an abnormal working state, and the freshness of the food cannot be guaranteed. The consequence of the blockage of the refrigerator drain hole is that the refrigerator loses its original function, and the freshness of the food is greatly reduced.

Yes, the drainage hole should not be blocked, and it should be opened for a long time. Turn off the power when the drain hole is blocked, and wait for the drain hole ice to melt and clean up the foreign matter. First take out all the food in the refrigerator and then turn off the power to make it easier to handle.

When the ice blocking the drain hole melts, clean up all the debris in the drain hole. The ice of the drainage hole must wait for it to melt naturally, and cannot be pried with a hard object to avoid injuring the internal insulation. Turn the refrigerator thermostat to Variable 2 or Variable 3 to avoid the refrigerator temperature being too low and the drain holes from freezing again.

Ask how to use the drain hole in the freezer.

Turn off the power and wait for the drain hole ice to melt to clean up the foreign matter. First take out all the food in the refrigerator and then turn off the power to make it easier to handle. When the ice blocking the drain hole melts, clean up all the debris in the drain hole.

The ice of the drainage hole must wait for it to melt naturally, and cannot be pried with a hard object to avoid injuring the internal insulation. Turn the refrigerator thermostat to Variable 2 or Variable 3 to avoid the refrigerator temperature being too low and the drain holes from freezing again.

Ask <>

1. Generally, freezers are designed with drainage pipes for refrigeration and freezing. The refrigerator is generally opened, and the small amount of water generated during the use process is convenient to be discharged in time to prevent soaking food. The freezer is generally not opened, and is drained when the freezer is cleaned, and is blocked after cleaning.

2. The head return hole at the bottom of the freezer cannot be blocked, otherwise it will affect the use, and will also cause the water in the drain pipe to not melt in time, affecting the refrigeration effect. 3. If the drainage hole of the freezer is blocked, it is necessary to clean up the foreign object. Recommended action:

1. First take out all the things in the freezer, and then turn off the power, which is more convenient to deal with. 2. After the ice blocking the drainage hole melts, clean up all the debris in the drainage hole. It should be noted that the ice inside the drainage hole must melt naturally, and cannot be pried with hard objects to prevent damage to the internal insulation layer.

3. After cleaning, it is recommended to put the freezer thermostat.

Turn to Variable 2 or Variable 3 to avoid the freezer temperature being too low and causing the drain hole to freeze again. Usually, when the food is refrigerated, the food residue enters the freezer drain hole, so the freezer drain is blocked. At the same time, there is also the reason why the ice in the freezer drain pipe cannot melt in time, which will also cause the phenomenon of blockage of the water hole of the drainage.

Hello Kiss is happy to answer this question for you. There are water droplets outside the freezer Solution: 1. The temperature adjustment should be slightly increased by two degrees as much as possible to reduce the temperature difference between the surface and the inside of the room, which can reduce the phenomenon of water droplets.

2. Frequently use a soft cloth to clean the surface of the glass door and other water beads, which can reduce the phenomenon of water droplets. 3. Place the glass door freezer in a well-ventilated position, which can also reduce the phenomenon of water droplets. A freezer, also known as a freezer, is a device that preserves food and other items at low temperatures.

There are two kinds of distinction between household and commercial, and commercial freezers are used in restaurants, water bars, food processing and supermarkets. The discovery of American Jacobi Perkins in 1834 led to the invention of the refrigerator. Scotsman John Harrison discovered the cooling effect, and by 1862 his first refrigerators were on the market.

The German engineer Carl von Linde built the first household refrigerator in 1879. But before the invention of the electric refrigerator in the 1920s, refrigerators did not make their way into homes on a large scale. And the popularity was in the United States in 1920.

Household refrigeration equipment appeared in 1910, in 1913 Larsen manufactured the first manually operated household refrigerator, in 1918 the United States Kelvinator Company sold refrigerators on the market for the first time, 67 units were sold that year, in 1926 the United States Strange Company manufactured the world's first sealed refrigeration system refrigerator, in 1927 the first household absorption refrigerator appeared in the American market, in the 1930s gradually popularized, in 1939, The double compartment was introduced into commercial use by General Electric.

You can use a thin soft wire to dredge or find a pump to dredge.

The drain hole under the back of the refrigerator is used to drain the condensate in the refrigerator, if the condensate drain hole is blocked, the condensate generated by the refrigerator will not be effectively discharged, and it will overflow everywhere.

If the drain hole is blocked, one of the easiest and easiest ways to dredge it is to use a thin soft wire to dredge the drain hole. You can also use a pump, align the outlet of the pump with the condensate drain and stick it tightly, hit the pump a few times, and dredge it by the pressure of the pump.

When the refrigerator is in use, the simple plastic filter that was originally equipped with the condensate drain should be installed to prevent solids such as vegetable leaves from clogging the drain holes.

.There is a drainage hole in the back wall of the refrigerator room, where the melted water can be discharged during normal shutdown, and after a long time, it is blocked by a small amount of debris (or slightly), causing the water to not be discharged out of the box, and the fresh-keeping layer will accumulate water (leakage). You can try to dredge it with something like a wire or wire, and if you can't solve it with something, you can open the back cover of the refrigerator, remove the water tray, and you can see the drain pipe, and blow hard (or blow with a gas bag) against the pipe to blow the debris out!