How to paste the curved screen, how to paste the tempered film of the curved screen

The curved screen mobile phone comes with a layer of film, and there is no need to re-paste it.

"Curved surface" is not only a subversion of the appearance of the TV,It is a significant improvement in the comfort of the first,It is a major advance in the development of the appearance of the TV。 At the same time, it is also a test and challenge for the manufacturer's technology.

As a pioneer of curved TV, LG Electronics.

After repeated practice, the most suitable ergonomics were established.

The curvature of the human eye equalizes the distance from the human eye to each point on the screen, providing a wider field of view and a stronger sense of presence. On top of this, LG has combined curved surface technology with the most cutting-edge OLED technology and 4K technology to create excellent TV products.

Curved screens:

The curved screen is based on non-rigid glass, which has better elasticity and is not easy to break. Reduced the chance of screen wear, especially on mobile phones with a high chance of being touched.

When used in mobile phones, the curved design of the curved screen as a whole is conducive to holding, and the curvature of the palm fits better, reducing the distance between the thumb touching the screen when operating with one hand, which theoretically helps to improve the experience of horizontal cross-screen operation under large-size screens; Seemingly subtle curves can allow phone owners to have better privacy of information, such as the person sitting next to them not being able to see what is displayed on the phone's screen.

The result is a thinner, lighter, and lower power consumption. The curved screen increases the viewing angle, so it works well even at off-center angles**.

After the TV is equipped with a curved screen, users can also enjoy a viewing experience similar to IMAX in the living room.

What 3d 4d is a lie, the merchant is not honest with his own name, and now it is out of 9d, you don't believe it to buy it back and compare it, you are absolutely stunned for a moment.

Don't be greedy for cheap when you buy tempered film, always remember that cheap is definitely not good, I used a mobile phone with mate20pro, and it was the first time to use a curved surface, hydrocondensate film large film uv film dot tempered film full rubber tempered film has been used, a batch of garbage, of course, are within 50 yuan, paste on the white edge bubble top mobile phone case warped edge into the ash, fingerprint residue fingerprint recognition is not sensitive to various problems, and then I tried the Japanese sapphire crystal coating film ruthlessly, but also the most expensive I have ever used, 89 two, The first sticker is scrapped, the second sticker is pasted, let's see the effect.

There is nothing to say about the curved surface effect and the fitting effect, the main thing is the feel, the slippery skin, which is comparable to that of the bare metal.

I have done tempered film on an e-commerce before, and now the tempered film of the curved screen is generally divided into so many types, one is not fully pasted, that is, it only covers the flat area, and the other is fully pasted, but the frame will be added, and the effect of the curved screen will be gone after pasting. Another one is soft, saying that it can be explosion-proof. However, it loses a lot of light transmittance, and the surface is soft, and the nails are uneven after scratching, which affects the eyesight very much.

The last one is the hard tempered film that is also made into a curved screen, which tests the quality control of manufacturers. And it's expensive. Basically, they are all sold for more than 100 yuan.

Otherwise, don't stick the film to buy a broken screen insurance, if you don't feel at ease, buy a better one.

How to apply film to curved screen mobile phones? It takes 2 minutes to learn, and the method is very simple, there are no bubbles at all.

The method of curved screen film is as follows:

Tools: dust removal tape, scissors, film, scraper, dust removal sticker, cleaning cloth, film artifact, wet wipes, non-slip mat, mobile phone.

1. Put the mobile phone on the non-slip mat, after tearing off the previous mobile phone film, if there is dirt on the screen, you can wipe it with a wet towel first, and then wipe it with a cleaning cloth when it is dry.

2. Next, the first thing to do is to install the film artifact, the size and shape of the artifact may be slightly different, but the function is the same, it is used to fix the film.

3. If dust and fluff float on the screen at this time, then put on the dust removal tape, different from the general tape, the dust removal tape has weak viscosity, which is more suitable for sticking dust and fluff, and will not leave glue on the screen.

4. First of all, the upper part of the film, remember not to tear the protective layer of the lower layer of the film, but to uncover the protective layer from the opening a little bit upwards, and use the scraper to slowly push the upper part of the film upwards, so that the lower protective layer will gradually detach itself with the push, and when the upper part is pasted, the lower protective layer is also completely detached.

5. After fixing the upper part of the film, start to paste the lower half, then you can remove the artifact, and clean up the screen with a dust removal sticker by the way. In order to prevent the film from having a horizontal stripe in the middle of the corresponding lower protective layer after pasting, uncover the upper part that has been pasted up a little, tighten it slightly, and then spread it on the screen and push the film from top to bottom with a scraper, and the operation steps are the same as when pasting the upper half.

6. The next step is to quickly press and smooth the film on both sides of the screen with your fingers to prevent dust. Finally, the upper layer of protection is removed. If there are scattered small bubbles, you can leave it alone, and it will basically disappear after a day.

If it is dusty, do not remedy it if it is not a big problem to use, and the remedy will get worse and worse.

The method steps of pasting the tempered film of the curved screen are:

Operating tools: tempered film, curved screen mobile phone.

1. Disassemble the alcohol swab and wipe the mobile phone screen clean, leaving no fingerprints at all.

2. Wipe the screen with a gray cloth to avoid alcohol moisture residue, and wipe off dust, and wipe the screen carefully. Don't leave a single layer of ash behind.

3. Tear off the release film of the tempered film, hold the edge around it, aim at the screen next to the manuscript, look at the edge around it, and the position of the home keyboard, put the tempered film down gently, and gently press the middle of the screen sticker.

Features of tempered film:

Tempered glass mobile phone film is a new mobile phone protective film launched in China in 2012, which is a high-end new product with the most enhanced protection for the protective screen.

The thickness of this protective layer is only millimeters, which can completely cover the original screen surface, prevent damage and scratches by external forces, and increase the rubber absorption of punching keys, which is 5 times higher than the standard of PET film. It does not affect the effect of the screen.

No, you don't. Curved screen mobile phones do not need film, because it is difficult to find a suitable screen for curved screens, and white edges will appear after a lot of tempered film is pasted. Over time, the problem of white edges can get worse and worse, causing dust to enter.

Of course, not only in terms of purchasing a simple film, but also people with disabilities who are suspected of having a disability will generally increase the input cost of mobile phones. When it leaves the factory, it is a layer of plastic protective film, and the curved screen has a tempered film of the curved screen, as well as a soft film. These membranes are protective.

Features of curved screens:

1. The material of the curved screen is not easy to be damaged. The existing information shows that the bendable screen uses a special plastic material instead of mainstream glass, so it is more elastic than ordinary mobile phones.

2. The curved screen is clearly displayed. Speaking of which, since there is no ready-made mobile phone data to support it, perhaps it can be seen from the curved TV screen. Samsung、LG,Sony,When the curved TV was launched at the IFA exhibition,The flag is that the screen of the curved TV is more in line with the curvature of the human retina,Improve the sensory experience。

3. The curved screen has low thickness, light weight and low power consumption. This has to do with the AMOLED organic light-emitting diode technology used in flexible screens. This diode is power-efficient, low-energy, and supports bent displays.

This is good for smartphones to continue to move towards lighter, thinner, and longer battery life. <>

Summary. The curved screen is a new type of display that is more effective than the traditional flat panel display, but it also has its own characteristics. The surface of the curved screen has a layer of arc, here, there may be the problem of glare, and because the curvature of the surface of the curved screen is large, it is easy to be affected by the external environment, if it is not protected, it is easy to cause damage to the surface of the screen.

So, it's about the film. The film can not only prevent the influence of the external environment, but also effectively inhibit the generation of glare, so that the display effect of the curved screen is better and the visual effect is better. So, do curved screens need to be filmed?

The answer is yes. The film can effectively protect the curved screen, reduce the influence of the external environment, prevent the screen from being damaged, and at the same time inhibit the occurrence of glare, making the display effect of the curved screen better. In short, the curved screen should be filmed in order to effectively protect the curved screen.

The film can inhibit the occurrence of glare and prevent the influence of the external environment, making the display effect of the curved screen better and the use more safe and reliable.

To be posted. The curved screen is a new type of display that is more effective than the traditional flat panel display, but it also has its own characteristics. The surface of the curved screen has a layer of arc, here, there may be the problem of glare, and because the curvature of the surface of the curved screen is large, it is easy to be affected by the external environment, if it is not protected, it is easy to cause damage to the surface of the screen.

So, it's about the film. The film can not only prevent the influence of the external environment, but also effectively inhibit the generation of glare, so that the display effect of the curved screen is better and the visual effect is better. So hungry and empty, do you want to film the curved screen?

The answer is yes. The film can effectively protect the curved screen, reduce the influence of the external environment, prevent the screen from being damaged, and at the same time inhibit the occurrence of glare, making the display effect of the curved screen better. In short, the curved screen should be filmed in order to effectively protect the curved screen.

The film can inhibit the occurrence of glare, prevent the external environment from ringing, make the display effect of the curved screen better, and use it more securely and reliably.

Can you still stick it after scratches?

I'm using an exit film now, do I still use a sticker?

Are you there? Yes, if you have an appearance, you don't need to post it.

It can be pasted. If you can't post it yourself, it's best to go to the store.

But I feel that the factory film is so brittle, I haven't used it for less than a day, and there are scratches, and I haven't been scratched by other things on the screen.

Then tear it off and go to the store to re-paste the good pro.

What kind of film to paste. I don't know if it's a scratch on the inside of the screen or if it's on the membrane.

Hydrocondensate is best pro.

The method of tempered film film for curved screen is as follows:Tools: Xiaomi 10, wet wipes, dry wipes, dust removal stickers, positioning frame, mobile phone film.

1. First of all, prepare the tempered film, wet wipes, dry wipes rental vertical, dust removal sticker, and family pure positioning frame.

2. Then wipe the screen with a wet towel 1 and wipe the screen with a dry towel 2.

3. Then use the positioning frame to put the phone up, as shown in the figure below.

4. Then align the tempered film in the middle and gently put it down.

5. Then use cardboard to push the tempered film to the side to push the bubbles out.

6. Finally, gently wipe the edge with a dust cloth to complete the film.

The hardness of the tempered film is high, the surface hardness of the general plastic film does not exceed 3h, while the hardness of the glass is 6h, and the treated tempered glass is higher, which can reach 7h.

Tempered film is scratch-proof and explosion-proof, tempered glass film can prevent the broken and scattered glass panel caused by accidental impact of the mobile phone, which greatly reduces the danger to people, and it also has better scratch resistance, and it will not leave scratches easily, while the ordinary plastic film will have a large number of scratches after a period of time, which greatly affects the aesthetics of the mobile phone.

Curved Tempered Film Wrapping Steps:

1.First prepare the tempered film, wipe the screen with a wet towel 1 first, and then wipe the screen with a dry towel 2 2If there is fine dust, you can use a dust strip to stick it off.

3.Buckle the positioning frame, then align the tempered film in the middle, and gently square down 4Finally, gently wipe the edges with a dust cloth. The film is finished. end 1 There are more steps for hydrocondensate film, first of all, curved tempered film film steps:

1.First prepare the tempered film, wipe the screen with a wet towel 1 first, and then wipe the screen with a dry towel 2 2If there is fine dust, you can use a dust strip to stick it off.

3.Buckle the positioning frame, then align the tempered film in the middle, and gently square down 4Finally, gently wipe the edges with a dust cloth. The film is finished. end 1 There are many steps for hydrogel filming, first of all.