The electric kettle light is on and not heating, what s going on?

Reasons why the kettle does not heat up when it is energized:

1. Most of them are the problem of temperature control, because temperature control is the heart of the entire electric kettle, and its main function has been to control the water to automatically disconnect from the power supply, or connect the power supply, and accept the corrosion of steam for a long time, resulting in the deformation and rust of the temperature control spring steel sheet, so that the power failure or power on can not be normal;

2. If the electric kettle is energized and the heating plate is not heated, this fault should consider what material the electric kettle is. If it is a plastic kettle, it is generally enough to replace the heating plate directly; However, if it is a stainless steel kettle, it is estimated that the entire steel kettle body of the electric kettle will be scrapped, because the heating plate of the stainless steel body is welded and there is no way to replace it. How to buy an electric kettle:

1. The electric kettle is an electrical appliance with water, and special attention should be paid to its electrical performance when purchasing to ensure that there is no leakage.

2. The interface between the heater and the body of the pot should be installed firmly, sealed well, and there should be no water leakage. It can be purchased with a light hand.

Gently toggle the heater to check whether the assembly is firm and there should be no loosening.

3. The connection between the power lead connector and the body of the pot should be reliable, the tightness should be appropriate, and the assembly and disassembly should be flexible.

When purchasing a fully automatic electric kettle with an air pressure water supply device, you should check whether the boiling water ** buckle pin switch is flexible;

The pressure of the boiling water ** button should not be too large; The assembly and disassembly of the outer cover, inner cover, and inner tank should be flexible and convenient, and the sealing performance should be good.

What to do if the kettle light is not on and does not heat, teach you how to repair the electric kettle.

Summary. 1. If the heating pipe is damaged, it cannot be replaced. Because the heating pipe and base of the electric kettle are formed at one time and cannot be repaired, the terminal of the heating pipe can be reconnected by virtual connection, and if the wire is broken, it can be repaired by spot welding machine welding method.

2. If the terminal plug-in is damaged, the plug-in can be replaced directly, if the terminal on the coupler is damaged, only need to replace the coupler according to the original model.

The electric kettle light is on and not heating, what's going on?

Hello, I have seen your question and am sorting out the answer, please wait a while.

Generally speaking, the problem should not be very big, first of all, in the case of excluding the power socket without a problem, according to the pure stupid test, the most likely problem is that the contact between the Zen pants open kettle and the base has poor contact;

1. If the socks are damaged, they cannot be replaced. Because the heating pipe and the base pin of the electric kettle are formed at one time and cannot be repaired, the terminal of the heating pipe can be reconnected, such as the broken wire and the douyan, which can be repaired by the welding method of the spot welding machine. 2. If the terminal plug-in is damaged, the plug-in can be replaced directly, if the terminal on the coupler is damaged, only need to replace the coupler according to the original model.

The working principle of the electric kettle is that the water vapor generated when the water boils deforms the bimetal sheet of the steam temperature sensing element, and this deformation pushes the power switch to power off through the lever principle. Its power failure is not self-reset, so the kettle will not automatically reheat after the power is off, so what is the matter if the electric kettle light is not heated?

1. The indicator light of the electric kettle is on, indicating that the power cord is good, either the metal sheet in the base of the electric kettle is in poor contact with the electric heater, or the electric heater is damaged.

2. But generally it is a fault caused by poor internal contact, you can tear off the self-adhesive outside the indicator light, expose the screws, remove it with a driver, you can open the base panel, and then unscrew the fixing screws inside the base, and remove the small screw in the middle of the dismantled base, you can see the contact surface between the metal sheet and the electric heater.

3. Generally, the metal sheet will change color when in contact with bad contact, if it is normal, you can use a multimeter to measure whether the electric heater is good, if it is damaged, you can buy a set of electrical appliances in the market and reinstall it.

That's it for the introduction of the contents of the electric kettle light when it is not heated.

<> If the electric kettle light is on, it means that it is a good base, but most of the heat is not heated because the base in the kettle is in poor contact with the heating metal sheet, or the electric heater is damaged, or it may be caused by the damage to the thermostat, at this time, it is best to remove the base, tighten the small screws, to ensure that the contact is normal, if the heater or the temperature is damaged early to let the controller be damaged, it is advisable to change the new one.