How do I turn off the headphone mode if the phone doesn t have a smart line control, I didn t plug i

The headphone mode of the mobile phone needs to be turned off in the smart assistance of the mobile phone, and the specific operation steps are as follows:1Swipe down the screen to find the "Smart Assist" option and tap to enter 2

There is a smart wire remote in this, you can see that this option is now open, click to open the smart wire control. 3.A variety of functions can be achieved by using the smart remote control, click on the "smart remote control" to close the option.

If the phone is not plugged into the headset to display the headphone mode, it is generally caused by the dampness of the mobile phone or the water entering the headphone jack, in this case, if it is not serious, just turn off the battery and remove the battery (iPhone) without it, and then throw out the water in the earpiece, and then use a cotton swab to gently screw in the water, and then use the hair dryer to turn on the hot air on low gear and slowly dry the remaining moisture, and restart the mobile phone.

The status bar above the phone will display a headphone icon when the headphones are plugged in, indicating that the headphones are in headphone mode, so how to turn this mode off?

Turn on step-by-step reading mode. How it works:

The first way is to take the earphones off the phone directly, and you can directly turn off the headphone mode.

If the first option doesn't work, just find the profile mode in your phone's settings and turn off headphone mode.

If the phone is not plugged into the headphones, it becomes the headphone mode, it is likely that the headphone hole has entered something, then you need to clean the headphone hole, and you can use a needle to pick out the debris.

If the previous methods do not work, it is likely that the motherboard of the mobile phone is broken and needs to be repaired by a special staff.

1. Android phones.

Take a Huawei phone.

For example) What are the cancellation methods for headphone mode?

1.Click Settings & Applications on your desktop.

Swipe down and tap Clear defaults;

2.Phone Settings, Privacy & Security, tap Backup & Reset, tap Factory Reset.

4.It is very likely that there is a short circuit problem in the headphone jack hardware, and it is recommended to go to your local Huawei for authorization.

Service center, please engineer to solve it.

2. What are the cancellation methods for the headset mode of the Apple mobile phone (taking the Apple 5 as an example)?

Method 1. Unplug the headphones and we blow them on a hair dryer (remember to turn it to the cold air) for a few minutes. If you find this method troublesome, you can put it in the sun at the right temperature and bask it for a while (too high the temperature of the sun) These methods are to dry the earphone port.

Method two. We can simulate the action of listening to **, but this time when unplugging the headphones, don't be too fast, and gently rotate and unplug them. Sometimes unplug it too quickly, and the phone's program doesn't respond. So keep the headphone mode all the time.

Method three. We unplug the earphones, find a needle, gently poke the earphone hole twice, it may be that when the earphones are unplugged, the bouncing device inside does not return to its original position, we poke it and wrap the toilet paper with the needle.

Wipe the inner wall of the headphone jack to wipe off the dust that covers it.

Method four. If none of the above methods work, we can try to restore the factory settings, but this step, you need to back up the data on your phone. (You can also press and hold the home button and the power on button for a few seconds to force the shutdown and then restart).

Method five. If you have tried all the above methods and cannot help you solve the problem, you can directly take the phone to Apple's after-sales service personnel for repair, which is also the best solution.

The steps to turn off the headphone mode displayed when the headphones are not plugged in on the Huawei phone are as follows:

1. Unplug your earphones to cancel the headphone mode. (as shown in the image below).

2. Press and hold the power button until you pop up the bright page of the phone to restart and shut down, click the restart button, and then turn off the earphone mode. (as shown in the image below).

The reason why the Huawei phone does not plug in the headphones and shows the headphone mode:

1. If the Huawei phone does not plug in the headphones but the earphone mark is displayed, it means that the Huawei phone has been put into the headphone mode.

2. It should be caused by the failure of the micro switch of the headphone jack, that is, the earphone has been pulled out of the spine, but the switch has not been disconnected in time.

3. You can try to quickly plug in the earphones several times to see if you can make the earphone logo disappear, or restart the phone.

4. If it still doesn't work, you have to get a new headphone jack at the after-sales outlet of the Huawei mobile phone.

5. The headphone mode is automatically switched, when the earphone is inserted into the earphone logo, it will come out, and the earphone logo will disappear automatically when the earphone is pulled out. <>

2. In the pop-up settings dialog box, scroll down the screen and find "Smart Assist".

3. Click on the "Smart Assist" option.

4. The intelligent wire control can see that this option is turned on now, click to open the intelligent wire control.

5. Click "Smart Line Remote" to close the option.

6. The earphone remote control will be turned off, and you can check whether the earphone mode is turned off after exiting the setting.

Summary. Here's how to turn off the smart remote on your Huawei phone: 1

To avoid misoperation caused by key reuse, remove the smart remote function starting from EMUI. Huawei phone cancellation.

My Huawei phone doesn't have an intelligent remote How can I cancel the headphone mode?

Huawei phone cancellation.

There is no intelligent assistance.

settings. No, I don't.

Accessibility.

Here's how to turn off the smart remote on your Huawei phone:2. : Settings >> >> >> >> >> >> >> >> >> >> >

Summary. 1.Try plugging and unplugging the earbuds once to see if the earbuds icon display is back to normal. 2.If the headset icon still appears after plugging and unplugging the headphones, please restart the phone to try whether it is back to normal.

1.Please try plugging and unplugging the earbuds once to confirm that the earphone icon is back to normal. 2.If there is still a headset icon displayed after plugging and unplugging the earphone, please restart the phone to try whether it is back to normal.

3.If you try to plug in and unplug the earphones and restart them, the earphone icon is still displayed: (1) Please check whether there is liquid, moisture, dust, etc. near the earphone jack, and the hand posture may affect the function of the earphone jack.

2) Please confirm whether you are using a non-standard one-turn multi-charge cable or earphone adapter cable, the use of non-standard one-turn multi-charging cable or earphone adapter cable may not be compatible with the mobile phone, resulting in the abnormal display of the earphone icon, it is recommended that you use the standard charging cable or earphone Bi Peiyuan adapter cable.

If the problem cannot be solved by the method of accompaniment in the elderly, please back up your data in advance (third-party applications such as QQ and WeChat need to be backed up separately), and bring the purchase voucher to a nearby Huawei customer service center for testing.

Summary. For example, if the phone does not have an inline control, the headphone mode should be able to be turned off in the settings, and you can go to the settings to flip through the settings, and probably the place is in more settings or accessibility functions, etc.

For example, if the phone does not have a wire control, the headphone mode should be able to be turned off in the settings, and you can go to the settings without flipping vertically, probably in more settings or accessibility functions and so on.

What's going on with the teacher's black screen.

1. You can try to force a factory reset as follows (please make sure your phone is turned off): Step 1: Press and hold the "Wuzhou Power Button" and the "Volume Up Button" to vibrate and display the selection interface.

Step 2: Confirm by operating the up and down volume keys, select "Factory Reset", and press the "Power Key".

Step 3: In the page that appears, select "Factory Reset". Step 4: Select "Restart Phone" once the restore is complete

2. If the above methods do not work, it is recommended to bring the purchase invoice to the local after-sales service center for inspection and maintenance.

If your phone is not plugged into the headphones interface and the headphone icon is displayed, there are many reasons for this phenomenon, such as liquid, moisture, dust, etc., or whether the earphones are standard or not, which may affect the function of the headphone jack. Here's how you can try to solve it:

1. Please try to plug in and unplug the earphones once or restart the phone to try.

2. If there is liquid or dust in the earphone jack, please try to clean it.

3. If the display of your mobile phone is still abnormal, Yu Zhao asks you to back up your data in advance (QQ, WeChat and other third-party applications need to be backed up separately), bring the relevant purchase voucher, and go to the nearby Huawei Customer Service Center for more help.

The customer rents a service center.

Boarding service. Repair spare parts** inquiry.

The steps to turn off the smart remote on a Huawei phone are as follows:

Enter the mobile phone [Settings] - [Intelligent Assistance];

Uncheck [Smart Line Control].

Turn on the smart remote function first, plug in the earphones, and then unplug them, the remote function icon may disappear automatically, and then turn it off.

Disable the "smart by-wire" function.