How to remove and wash the Midea hanging air conditioner filter

Before disassembling the cabin air filter, carefully open the cabin air conditioner case. Generally, there are two small slots in the air conditioner shell, and the outer cover can be gently pulled outward. After opening the air conditioner cover, there are often two buttons inside, which need to be gently opened to allow the cover to be fully opened.

Then take the filter. The filter is easy to hold, but it gets stuck in a couple of card slots. Filter it first...

After the filter screen is removed, some air conditioners have black particles, and the filtration is enhanced, so they should be removed separately for cleaning and drying. Then carefully rinse the filter with clean water a few times, brush it a few times with a soft brush, and finally ventilate...Remove the strainer, take the water pipe, and rinse with tap water.

Don't use dish soap or anything like that, just rinse it and you're good to go. Please dry in a cool place, not in the sun. The filter screen is generally plastic and resistant to high temperatures.

<>1. Before disassembling the air conditioning filter, carefully open the air conditioning shell, generally the air conditioning shell is stuck with two small card slots, and gently pull the outer cover outward.

2. After opening the outer cover of the air conditioner, there are often two buckles inside, and it is necessary to gently open the outer cover to fully open. Then it is to take the filter, the filter is relatively easy to take, but it is stuck by a few card slots, first push the filter up, and after the lower end is out of the card slot, then gently drag the filter down and take it out.

3. After removing the filter, some air conditioners have black particles that strengthen the filtration, which should be taken off separately for cleaning and drying. Then carefully rinse the filter with clean water several times, you can scrub it with a soft brush several times, and finally dry it in a ventilated place until it is dry. Be sure not to bend the filter when cleaning, although it is elastic, but the plastic one can not withstand bending.

4. Remove the filter, take the water pipe and rinse it with tap water, don't use things like dish soap, just flush it directly. Put it in a cool place to air dry, do not expose it to the sun, the filter is generally plastic, and it cannot withstand high temperatures. Install the cleaned filter back inside the air conditioner, and if there are dirty places inside the air conditioner, wipe them clean in advance.

In this way, the air conditioner will be much cleaner and fresher when you use it again. When cleaning, you must not use anything like a brush, which will make the filter eye of the filter larger, which is a damage to the filter and also affects the use of the air conditioner.

5. Compared with disassembly, it is troublesome to install the filter screen, it takes a lot of effort, during installation, it is necessary to plug the filter screen into it along the card slot, and you must look at the front and back, and there is a protrusion in the back. Once you've put the filter in completely, make sure that the inside side gets stuck in the slot and doesn't fall off. Then press the filter without arching, and finally clamp the protruding buckle in the card slot.

This answer is applicable to most of the air conditioner models of brands such as Midea KFR-26GW N8MJA3&.

Summary. The operation method of Midea air conditioner dismantling and cleaning filter is as follows:

1. Turn off the air conditioner and unplug it.

2. Pick out the two card slots on the air conditioner shell by hand, open the outer cover after picking it open, and then gently pick open the two buckles in the outer cover.

3. Gently push the filter up with your hand and take it out.

4. Put the filter screen under flowing clean water and wash it several times, rinse it and put it in a ventilated place to dry.

How to disassemble and wash the filter of the Midea air conditioner.

The operation method of Midea air conditioner to remove and clean the filter is as follows: 1. Turn off the air conditioner, and then unplug it. 2. Pick out the two card slots on the air conditioner shell by hand, open the outer cover after picking it open, and then gently pick open the two buckles in the outer cover.

3. Gently push the filter up with your hand and take it out. 4. Put the filter screen under flowing clean water and wash it several times, rinse it and put it in a ventilated place to dry.

Product model: Midea KFR-35GW1, turn off the air conditioner, and then unplug it, which can prevent electric shock in the process of removing the filter. 2. Gently pick out the two card slots on the air conditioner shell with your hands, open the outer cover after picking it open, and then gently pick open the two buckles in the outer cover, and the air conditioner shell can be completely opened at this time.

3. When the shell is fully opened, find the filter, and gently push the filter up with your hand, and it will be detached from the air conditioner card slot. 4. Put the filter screen under the flowing water and wash it several times, clean the dust on the filter screen, rinse it and put it in a ventilated place to dry. Summary 1: Turn off the air conditioner and unplug it.

2. Pick out the two card slots on the air conditioner shell by hand, open the outer cover after picking it open, and then gently pick open the two buckles in the outer cover. 3. Gently push the filter up with your hand and take it out. 4. Put the filter screen under flowing clean water and wash it several times, rinse it and put it in a ventilated place to dry.

Do you have any other questions? I'm glad to continue to answer for you The above is all my reply, I hope it can help you, I wish you a happy life Remember to like it! Thanks for your support!

In the summer, everyone has turned on the air conditioner! However, if the air conditioner is not used for a long time and the filter is not cleaned, it will emit Zen oranges, and the wind blowing from the air conditioner smells of dust, and there may be many bacteria in it. Endangering our physical health.

So, how to remove the Midea air conditioner filter to wash the hang-up machine? Here we will bring you the Midea air conditioner filter removal method.

How to remove the Midea air conditioner filter to wash the hang-up machine?

Midea air conditioner filter disassembly** method

1. First of all, open the shell of the air conditioner, and then you can see the filter screen of the air conditioner, generally there are two card slots outside the air conditioner, and you can open it by gently pulling the card slot outward.

2. After the outer cover is opened, it is easy to take off the filter, as long as the lower part of the filter is grasped, and then gently dragged down, generally speaking, the air conditioner has two filters.

3. After taking it off, use a fine-haired toothbrush to clean the dust on it.

4. After cleaning, be sure to dry the filter.

5. Because there is a card slot on the top of the filter screen, generally speaking, the card slot is facing down.

6. Stuff the filter screen into the host along the card slot, and lay the filter screen flat.

7. After the filter is installed, buckle the shell and it's OK.

The above is about how to remove the Midea air conditioning filter car net to wash the hang-up machine, and the introduction of the Midea air conditioning filter disassembly. Midea air conditioner filter is very simple to disassemble, you can refer to the above methods. It is necessary to disassemble and clean the air conditioner filter regularly to avoid the filter accumulating too much dust and dirt, which will affect the air conditioner refrigeration.

1.Before disassembling the cabin air filter, carefully open the cabin air conditioner case. Generally, there are two small card slots stuck on the air conditioner shell, and the outer cover can be gently pulled outward.

2.After opening the outer cover of the air conditioner, there are often two buckles inside, which need to be opened gently to make the outer cover fully open. Then take the filter.

The filter is easy to hold, but it gets stuck in a couple of slots. Start by pushing the filter upwards, then gently pull the filter down and take it out. 3.

After removing the filter, some air conditioners will have black particles with enhanced filtration, which should be removed separately for cleaning and drying. Then carefully rinse the strainer several times with clean water, brush it several times with a soft brush, and finally leave it in a ventilated place to dry until it is completely dry. Do not bend the bright dust filter when cleaning the beard.

Although elastic, the plastic ones do not stand up to bending. How to clean the air conditioner filter? Remove the strainer, take the water pipe, and rinse with tap water.

Don't use dish soap or anything like that, just rinse it and you're good to go. Please dry in a cool place, not in the sun. The filter screen is generally plastic and resistant to high temperatures.

Put the cleaned filter back into the air conditioner. If the air conditioner is dirty, clean it in advance. In this way, the air conditioner will be much cleaner and fresher when it is used again.

When cleaning, you must not use anything like a brush, which will make the filter eye of the filter larger, damage the filter, and affect the use effect of the air conditioner.

Midea's air chop shouted that Fang Chun of the hanging machine dismantled and washed the filter screen as follows:

Tool Material: Midea air conditioner hang-up.

1. First pull outward and remove the Midea air conditioner hanging mask.

2. Then see the filter inside the Midea air conditioner.

3. After that, gently push upwards to push the filter screen of the Midea air conditioner from the lower card slot.

4. Then pull down the filter of the Midea air conditioner.

5. Finally, the filter of Midea's air conditioner was taken out.

The method of hanging and dismantling the filter screen of Midea air conditioner is as follows:

Tools Material: Air conditioner, filter.

1. First of all, pull outward, and take off the mask of the Midea air conditioner hanging cultivation and infiltrating machine with the group ridge.

2. Then see the filter inside the Midea air conditioner.

3. After the noise, gently push upwards to push the filter screen of the Midea air conditioner out of the lower card slot.

4. Then pull down the filter of the Midea air conditioner.

5. Finally, the filter of the Midea air conditioner was taken out for cleaning.

Precautions for disassembling and washing the air conditioner filter

1. Power failure: Before disassembling and washing the air conditioner filter, be sure to power off the air conditioner to avoid the risk of electric shock.

2. Confirm the location: Before removing the filter, confirm the position and disassembly method of the filter. Different models of air conditioner filters may have different installation methods, you can refer to the air conditioner's instruction manual or consult a professional.

3. Gentle handling: When removing the filter, it should be handled gently, and avoid using too much force or twisting the filter. Excessive force may cause the filter to be deformed or damaged, affecting its filtration effectiveness.

4. Cleaning method: You can use clean water to rinse the filter screen, or use mild detergent to clean. Avoid using aggressive or acidic cleaners that can damage the filter material. Use a soft-bristled brush to gently scrub the surface of the filter to remove dust and dirt.

5. Fully drying: After cleaning the filter, make sure that the filter is completely dry before installing it in the air conditioner. Moist filters are prone to bacteria and mold, which can affect the effectiveness of air conditioners and air quality.