How to install the air conditioner filter How to install the air conditioner filter

1.Before cleaning or replacing the car air conditioning filter, you should first know the installation location of the car air conditioning filter, generally the air conditioning filter of Japanese cars is installed behind the glove box of the passenger seat, so you need to disassemble the air conditioning filter, first of all, you need to open the cover of the passenger glove box.

2.As shown in the figure above, first determine the fixing method of the cover plate of the glove box in the passenger seat, the cover plate of the general glove box is fixed through the fixing buckle on the right side, so after finding the fixing buckle on the right side, press it down with your hand and pull it out forcefully.

3.Then remove the cover by removing the fixing clip on the right side of the glove box cover.

4.Then we need to remove the entire glove box, first hold down both sides of the glove box with both hands and squeeze it in the middle to remove the glove box.

5.When you remove the glove box in the passenger seat, you can see the air conditioning filter cover behind you (the position pointed by the arrow in the picture above), and then press the fixed buckles on both sides of the air conditioning filter cover with your hand in the middle to remove the air conditioning filter cover.

6.Behind the cabin air filter cover is the car air filter that we need to replace, and you can remove it by grasping the exposed end of the old air conditioner filter with your hand and pulling it outward. If the air conditioning filter is still very clean, you don't need to replace it, just blow it clean with a hair dryer, if it is too dirty, you need to replace the car air conditioning filter in time.

7.If you need to replace the car air conditioning filter, you only need to install and disassemble the new air conditioning filter in reverse, and then install the front passenger glove box in reverse and install it back in the order of disassembly.

When installing the air conditioner filter, you first need to open the glove compartment and pull down the small hook on the right side. Then pinch the sides of the glove box and press it inside, and you can take it off. After loosening the clips on both sides, you can drag the air conditioner filter compartment out.

Finally, pull out the filter compartment, install a new filter element, and put it back into the glove compartment.

Hello, open the lid of the indoor unit of the air conditioner and install it in alignment with the buckle position.

Hope! Thank you!

Here's how:1. Open the front panel of the air conditioner. The specific method is shown in the following figure:

2. Slowly push the air conditioner filter inward along the frame. The specific method is shown in the following figure:

3. Insert the lower edge of the filter into the card slot. The specific method is shown in the following figure:

4. The same method is used for the filter on the other side. The specific method is shown in the following figure:

5. Finally, close the lid of the air conditioner. The specific method is shown in the following figure:

The air conditioner filter is one of the most important components of the air conditioner, which can effectively isolate the dust in the air. In winter, every household will turn on the air conditioner to heat, and it is essential to keep the air conditioner clean, so today I will teach you how to disassemble, clean and install the air conditioner filter.

Disassembly: 1. Disassemble the shell, the shell is stuck with two small card slots, and gently open the outer cover.

Second, disassemble the filter, it is stuck by several card slots, first push the filter up, the lower end is out of the card slot, and then gently drag the filter down and take it out.

3. After removing the filter, some air conditioners have black particles that strengthen the filtration, which should be taken off separately for cleaning and drying. Then rinse the filter with clean water several times, you can scrub it with a soft brush several times, and finally dry it in a ventilated place until it dries through. Note:

Be sure not to bend the filter when cleaning, although it is elastic, but the plastic one can not withstand bending.

Installation: First, during installation, the filter screen should be stuffed along the card slot, and the front and back must be looked at, and the protruding small buckle is the back.

Second, after the filter is completely put in, make sure that the inside side is stuck in the slot and does not fall.

3. Press the filter screen, don't arch it, and finally stick the protruding buckle in the card slot.

Pay attention to the cleaning of the filter screen.

When cleaning the filter, first cut off the power supply, then open the panel and take out the filter. Dust the filter with a brush vacuum cleaner and then wash it with clean water. When it is too dirty and oily, it can be cleaned with detergent or neutral soapy water, rinsed with water and dried.

It should be noted that it must not be washed with hot water above 40 degrees. Do not use laundry detergent, dish soap, gasoline, banana water, etc., to avoid deformation of the filter. In addition, after rinsing with clean water, wipe dry with a soft cloth or blow dry in a cool place, and never expose to the sun or dry in an open flame such as a stove to avoid deformation of the filter.

After installing the filter, plug in the power and wait for 3-5 minutes, set the remote control to the refrigeration mode, set the temperature to the lowest condition, and turn on the machine.

The above are the steps for dismantling, cleaning and installing the air conditioner filter.

What air conditioning filter do you need to install, generally air conditioners have their own filters, you don't need to reinstall them yourself, if you remove them and don't know how to install them, look at the manual, it is written, because I don't know what air conditioning filters you are talking about, there are many kinds of air conditioners.

Stepping into the summer, the air conditioning on the car is the only driving force that can make people drive out in the hot summer, and everyone can't help but feel that the air conditioning is the world's most outstanding invention. **There is a very important component inside the air conditioner that is often forgotten by everyone, that is, the air conditioning filter, which can also worry about the dust and dirt in the air code and some harmful substances, and can give faster and more comfortable extracellular fluid. However, after a long time, the air conditioner filter will also be dirty, and it must be disassembled and installed immediately.

So how to install the air conditioner filter?

The air conditioner filter element is divided into front and back, and must have a reasonable installation direction, and the front face is installed in the direction of the airflow. The airflow inside the car is blown from top to top, and there is an arrow sign on the dust macro on the general air conditioning filter, and the arrow symbol is facing the direction of the airflow and the installation direction. In addition, the double-sided surface of the air conditioning filter is completely eliminated, the general rough surface is the front face, facing the direction of the airflow, and the surface with the support structure is the back, facing the direction of the airflow; The grayish-black side with activated carbon is facing the front face in the direction of the airflow, and the white flour is facing the back side facing the direction of the airflow.

Does it matter if the air conditioner filter is reversed?

The air filter element will be harmful to the actual effect, ** the air conditioning exhaust volume is likely to be reduced, but the harm is not very large, some air filters have strict requirements on the front and back of the regulations, the opposite direction is not installed, pay attention to the arrow sign on the air filter, according to the front and back of the installation, the front face to the direction of the airflow can be installed.

1. When installing the air conditioner filter, you first need to open the glove box and pull down the small hook on the right side to tremble. Then pinch the sides of the glove box and press it inside, and you can take it off.

2. After loosening the clips on both sides, you can drag out the air conditioner filter grid.

3. Finally, pull out the filter grid, install a new filter element, and put it back into the sundries box.

<> to install the air conditioner filter, you first need to open the glove compartment and pull down the small hook on the right side. Then pinch the sides of the glove box and press it inside, and you can take it off. After loosening the clips on both sides, you can drag the air conditioner filter compartment out.

Finally, pull out the filter compartment, install a new filter element, and put it back in the glove compartment and you're done.

This answer is applicable to most brands of air conditioners such as Gree, Midea, and Haier.

The correct installation method of the air conditioner filter element is as follows:Tools: ix25, air conditioner filter.

1. Before operation, the vehicle needs to be parked to a safe position, and the position of the ix25 air conditioning filter is in front of the co-pilot.

2. After entering the passenger seat, open the glove box and remove it.

3. After opening the glove box, you noticed that there are buckles, buckles and limits on both sides.

4. Take the buckle out of the snap ring to remove the glove box.

5. Press and hold the card slots on both sides to remove the cover of the air conditioner filter.

6. After removing the cover, you can see the air conditioner filter, take out the old air conditioner filter and throw it away.

7. Replace the new air conditioner filter, and finally install the cover and glove box back according to the disassembly method, but complete the replacement of the air conditioner filter.