How to clean the air conditioner filter, how to clean the air conditioner filter

The first step of cleaning the air conditioner filter is to first open the front cover of the air conditioner, grasp both ends of the panel with both hands at the same time, and then gently push the panel open at a certain angle. The second step of cleaning the air conditioner filter is to remove the filter. Different models have different air conditioner mounts, but there are no screws, so it is easy to remove.

Air Conditioner Filter CleaningThe third step of air conditioner filter cleaning is to clean the filter. Using a vacuum cleaner, blow air or water to clean the aircon filter. Do not use too much force to prevent damage.

If there is oil on the air conditioner, wash it with warm water (below 45) dissolved in a neutral detergent and place it in a cool place to dry. Note: Do not wash with hot water above 45 to avoid damage, fading, or deformation of the paired cartridges.

It cannot be treated with an open flame, and the filter is easy to burn or deform. Step 4 of the aircon filter cleaning install the filter. Please be careful when installing the filter.

Do not install the filter in the wrong direction. It is very important to install it correctly according to the above bayonet position. After installing the filter, cover the panel, press hard, and hear a "click" sound, and the installation is successful.

Air Conditioner Filter Cleaning Air Conditioner Filter Cleaning Tips The operating environment of the air conditioner determines the number of times the filter is cleaned. In dusty environments, filters should be cleaned more often, but in the case of clean air, it is not necessary to do so. But generally once every six months, two or three times a year.

Also, when removing the filter, be careful not to touch the parts inside the air conditioner with your fingers. Some are very sharp and prevent scratching your fingers.

Here's how to clean the air conditioner filter:

First, turn off the power of the air conditioner, pull the left and right sides of the lid upward, and pull upwards to remove the filter from the card slot.

Wipe the dust off the air conditioner enclosure, as well as the air outlet. When doing all this, it's better to be slow and not to kick up the dust, which is not good for our body either. Then you can take out the filter.

The next step is to clean the filter. We can just rinse it at the faucet, dry it and put it in the air conditioner.

Note that first, do not use a brush to brush hard when rinsing the filter, which will damage the filter. The second is not to expose the filter screen to the sun, as the filter may be deformed in the case of exposure.

Clean the condensing evaporator. When cleaning the condensing evaporator, it cannot be removed and cleaned like a filter, we can use a professional disinfectant to clean it. When using the detoxifier, shake it first to shake the liquid inside.

Then a 15cm distance from the condensing evaporator can be sprayed. When spraying, it is best to spray from top to bottom, so that the effect will be better. After all this is done, we have to leave it to dry for about 15 minutes, by which time the disinfectant has completely dissolved the dirt inside.

The air conditioner shows that the dust is full, indicating that the filter needs to be cleaned and dismantled, and the solution is as follows:

Equipment: Haier Air Closure Adjustment.

1. Buckle the grooves on both sides with both hands at the same time and lift the lid of the traveling state Hu Kai, as shown in the figure below

2. Take out the two filters downward, as shown in the figure below

3. After that, the filter screen was successfully removed, as shown in the figure below

4. Rinse the filter screen with clean water and dry it naturally, as shown in the figure below

5. Reinstall the filter screen, as shown in the figure below

6. After the filter screen is installed, cover the lid, as shown in the figure below

The operation steps for cleaning the air conditioner filter are as follows:Material preparation: an air conditioner, a soft brush, appropriate amount of water, etc.

1. Find the air inlet grille on both sides of the air conditioner and pull the filter out with a little force.

2. Rinse with water.

3. Gently brush with a soft brush.

4. Shake the strainer to semi-dry.

5. Put the filter in a ventilated place to dry and cultivate rotten plums.

Cleaning Method:1First, unplug the air conditioner.

This is very important. Appliances must be safe. 2.

Remove the front panel of the air conditioner, dig it up directly, and lift it up. You will see two filters. 3.

Remove the strainer, take the water pipe, and rinse with tap water. Don't use dish soap or anything like that, just rinse it and you're good to go. 4.

Please dry in a cool place, not in the sun. The filter screen is generally plastic and resistant to high temperatures. 5.

Put the cleaned filter back into the air conditioner. If the air conditioner is dirty, clean it in advance. In this way, the air conditioner will be much cleaner and fresher when it is used again.

Precautions: When cleaning, you must not use a brush or something like that, which will make the filter eye of the filter screen larger, damage the filter, and affect the use effect of the air conditioner.

Here's how to clean the air conditioner filter:1. Find the air inlet grille on both sides of the air conditioner and pull out the filter screen with a little force, and rinse it with water below 40 degrees.

2. If it is dirty, you can use a soft brush to gently scrub it, wash the filter screen, shake the water dry first, and then put it in a ventilated and cool place to dry naturally.

3. During the drying process of the filter screen, you can wipe the air conditioner with a rag, which is conducive to the use of the cleaned filter screen in a clean environment, and finally the cleaned filter screen can be installed.

When installing the filter, you should first pay attention to its up and down direction, generally the filter screen has an upward arrow logo, and we place the filter screen according to the arrow logo. Then we insert the small button above the filter into the card slot at the upper end of the air conditioner, and then lift the filter slightly upward, and stuff the lower button under the filter into the card slot. Finally, we press the filter down gently, so that the filter does not arch.

1. After the filter is completely plugged in, make sure that the inside side is stuck in the slot and does not fall off. Then press the filter screen, do not arch it, and then stick the protruding buckle in the card slot.

2. When cleaning the filter screen, first cut off the power supply, then open the panel, and take out the filter screen. Dust the filter with a brush vacuum cleaner and then rinse it with clean water. When it is too dirty and oily, it can be cleaned with detergent or neutral soapy water, rinsed with water and dried.

3. It should be noted that it must not be cleaned with hot water above 40. Do not use laundry detergent, dish soap, gasoline, banana water, etc., to avoid deformation of the filter.

4. In addition, after rinsing with water, wipe dry with a soft cloth or blow dry in a cool place, and never expose it to the sun or dry it in an open flame such as a stove to avoid deformation of the filter. After installing the filter, plug in the power 3 5, set the remote control in the refrigeration mode, set the temperature to a low condition, and start running.

5. After the test machine is checked for hidden dangers, the wind speed switch of the remote control is set to run in different gears to observe whether there is abnormal noise in the internal machine. After about 15 start-up operations, observe whether the fan of the external unit is running normally, and whether there is any abnormal noise of the external unit. After about 30 hours of operation, observe whether there is a cold air sensation in the air outlet of the indoor unit, whether there is condensate flowing out of the outlet pipe of the outdoor unit, and whether the flowing water is smooth.

The principle of the air conditioner filter

The air conditioner filter can be said to be the core component of the entire air purification system, and the performance of the air conditioner filter directly determines the cleanliness level of the air conditioning system and the effect of air purification. According to the different filtration effects, it can be divided into primary air conditioning filters, medium air conditioning filters and high-efficiency air conditioning filters.

The main material of the air conditioner filter is non-woven fiber felt, which is an economical and affordable filter device that folds the filter material to increase the contact area with the air.

It can be seen that the installation of the air conditioner through the wheel cover filter needs to pay attention to the steps and methods, such as the installation method compared with the disassembly, the installation of the filter screen to be troublesome, during the installation, to plug the filter along the card slot, be sure to look at the front and back, there is a protrusion in the back. It is recommended that people must pay attention to the correct method when actually operating.