What should I pay attention to when reversing into storage, or what are the skills?

There are seven things that must be mastered:

1. Visually check the width of the parking space, whether there are obstacles behind it, whether there are cars parked on both sides, and whether the length is in line with its own model.

2. If conditions permit, try to choose to pour from the left side when reversing.

3. The speed in reversing is mainly idling, and the body is corrected in time.

4. Pay attention to the lateral distance from adjacent cars when pouring.

5. It is best to have someone to command when reversing.

6. When reversing, try to turn the front of the car towards a place with an open line of sight and room for maneuver to facilitate the observation of dynamic people or cars.

7. Do not reverse in places where reversing is not allowed in traffic rules to prevent accidents.

Note: 1. When you can't see clearly at night, it is best to come down and observe the exact position before falling, so as to avoid collisions or accidents.

2. The left side is convenient for the reversing person to observe, in the process of reversing, you should first look at the back, and then pay attention to the rearview mirrors on both sides. The lateral distance on the right side is greater than on the left. Because the turning radius of the front wheels is larger than that of the rear wheels, the front of the car will be thrown outward when reversing, and it is easy to scratch the right side if you do not pay attention to this.

3. The speed of hitting the direction in the process of reversing should be fast, so as to put the body right in a short time. Sometimes, the body may not be properly aligned when moving forward and backward at once, and it takes several times to park the car.

4. From the rearview mirror, when you see the rear of the car almost to the shoulder, quickly turn the direction enough, and wait for the body to return to the direction as soon as possible, and don't forget the distance from the car behind when reversing. If you can't grasp the distance between the cars, you can go down and take a look before reversing.

5. Sometimes it will stop in a straight line along the shoulder, and often have to reverse into the position between the two cars that have been parked.

The perspective in the car is more intuitive, see more, learn more, remember more.

Don't stick your head out and look behind you.

1. Although the car is reversing backwards, the eyes have to look forward, and if you don't pay attention to the front of the car, it is likely to rub against the left and right.

2. If the place is very small and there are obstacles on both sides of the car, when you fall back to the left, try to make the body stick to the left, and vice versa.

3. Observe the terrain before reversing, and pay attention to whether there are obstacles around the vacant space when driving over.

4. If it is not a spacious place, you don't need to pour too much when reversing, and you can walk in front of it.

5. When parking and reversing, it is just the opposite, the more you pour when you reverse backwards, and the more you go up when you go forward, the easier it is to park the car.

6. Don't play wheels on the spot, it will damage the car and the power will also sink. If you need to move the car a few times, pay attention to the car before each up and down action, when the car is about to stop and not stop, return a wheel in the opposite direction, so that the next action is more labor-saving.

7. You can ask the people around you to help command the reversing (remember not to command blindly). Always remember to roll down the windows or you may not be able to hear.

Back-up skills: control the driving speed, use the first gear or reverse gear to idle the whole process, and drive at whatever speed you start; It is necessary to carefully observe and grasp the key points of steering, and turn at the right time. In the test of controlling the driving route, the driving path of the car is mainly determined by the speed at which the steering wheel is turned and the driving speed.

When reversing, look at the sideline, correct the direction in time, and let the car stand upright and put it into storage.

Reversal operation points:

1. Enter the garage from the starting point:

1. After getting into the car, the driver first adjusts the seat and rearview mirror and fastens the seat belt. He then put the car into reverse gear, released the parking brake lever, and reversed after idling after auto-start. The driver observes the garage through the right rear window.

Second, when the black edge of the right rear window is aligned with the right line of the garage, turn the steering wheel to the right at a constant speed to the limit position.

Third, after the car is in the garage, the driver looks back at the left rearview mirror, sees the left edge of the entire garage, and immediately straightens the steering wheel.

When you see the left door handle level with the bottom line of the garage from the left rearview mirror, stop immediately.

2.Drive from the garage to the return point: Drive out of the garage before the car hits 1st gear. When you see the hood approaching the curb, turn the steering wheel to the left to the limit and stop straight behind.

3.Dump into the garage from the return point:

The first car engages in reverse gear, keeping the leftmost position of the steering wheel unchanged and reverses.

The second driver pays attention to the left rearview mirror, corrects the direction, and allows the rear end of the car to reverse into the garage.

After the third car enters the garage, the driver pays attention to the right rearview mirror, and when he sees the right line of the entire garage, he immediately straightens the steering wheel.

The fourth driver turned his gaze to the left rearview mirror and saw that the left door handle was level with the bottom line of the garage and immediately stopped.

Starting point from the garage: Drive out of the garage before the car hits 1st gear. When you see the hood approaching the curb, turn the steering wheel to the right to the limit and stop straight behind.

1. All novices must be useful to learn to drive, and the first stage of learning to drive is practiced.

Steps: 1. Start, 1. The clutch is taken to the end and hung in first gear.

2。Turn on the left turn signal.

3。Honk your horn.

4。Release the brakes.

5. Lift the clutch with your left foot. (Turn off the left turn signal when second gear is engaged).

2. Parking. Turn on the right turn signal, step on the brakes, step on the speed of 10 to 20 yards, then press the clutch, and wait for the car to stop and do the following:

1。Pull hand brake.

2。Neutralization.

3。Turn off the right turn signal. Lift the clutch first, then release the brakes.

The second stage is to experience the start and stop on the road.

The third stage is to learn to reverse the library and move the library.

1. Straight line advance and retreat.

Second, the library: from the right side of the down, in the right side of the triangle window to see the middle pile rod, the steering wheel to the right rotation of a circle, see the right side of the two pile rod overlap, the steering wheel to the right turn to die, see the first pile of the left library exposed 20 centimeters, the steering wheel to the left back a circle, after the car straight, the steering wheel to the left back a circle, the eyes see the left library in front of the line after parking.

Three transfer library: the left library moves the right library, 1. Hang in first gear, turn the steering wheel to the right and die, 2. Loosen the clutch, turn the front of the car to the middle pile 20 cm, the steering wheel immediately turns to the left, the car is straight, back one or two turns.

3。Hang the reverse gear, the steering wheel turns to the right, and after seeing the left pile in front of the left garage and the meridian line in front of the car, the steering wheel goes back to the left, and the car goes straight back to a circle, stops, 4. Hang a gear, the steering wheel turns to the right, the front side of the car is about 20 cm with the middle pile, the steering wheel turns back to the left twice, and the car goes straight back to a circle to stop, 5. Engage reverse gear, turn the steering wheel to the right, 6. Look at the right side of the back of the pile car blocked, the steering wheel to the left back two times, the car straight back to the right steering wheel back a circle, 7. The steering wheel turns to the left, the corner is aligned with the front two rods of the left library, the steering wheel turns back to the right, after leaving the library, when you see that the front line and the side line of the car coincide by about half, the steering wheel turns to the left, and the car stops straight behind, 8. Hang up reverse gear. The steering wheel turns to the right, reversing and seeing that the two rods on the left side of the library coincide, and the steering wheel turns to the left to die, 9. Look at the right mirror, the right library side pole is open 20 cm, the steering wheel is turned to the right, the car is straight, and then the right is rounded, and the appropriate seat is parked, 10. When leaving the warehouse, the front of the car covered the front line sideways, and the steering wheel was killed to the right, 11. The front of the car turns the steering wheel about 45 degrees and turns the steering wheel back once. Stop the car.

Newbies revisit the standard starting movements taught by the instructor. Hehe. If you have just opened it, the part with * can be omitted. Start by getting in the car:

1. Adjust the position. The distance between the front and back, the manual gear mainly adjusts the left foot, and after the ball of the foot steps on the clutch to the end, the foot has a slight margin. Automatic throttle adjustment.

If the feet are adjusted, the hands will generally not have much problem, and the hands will be convenient to operate the steering wheel. The backrest is based on comfort, and everyone's requirements are different, but from a safety point of view, try not to put it too low, driving while lying down will affect the function of the seat belt.

1. The right plays four, 2 times is positive, 3 is left, and the left plays four.

The most important thing is to control the speed of the car

Be sure to know how to repair the direction and pay attention to finding the right point.

Reversing into the garage is actually a difficult point for many drivers, indeed, reversing is called reversing piles during the test.

Before reversing, first see the situation behind the car, estimate the route of reversing, determine whether the front of the car will hit obstacles, try not to step on the accelerator when reversing, and control the speed not too fast.

Turn the steering wheel with your left hand according to the direction of travel at the rear of the car: if the rear of the car needs to travel to the rear right, turn the steering wheel to the right; Otherwise, turn the steering wheel to the left.

Do not keep looking at the back of the car during reversing, and on the premise of confirming the safety of the rear of the car, you need to observe the left and right rearview mirrors from time to time, pay attention to the distance between obstacles and the body, and use the steering wheel to correct the position of the car when the car is retreating.

If you feel that the front of the car may hit an obstacle during reversing, you also need to look at the front of the car at the right time. Especially in the case of a large rotation amplitude of the steering wheel, because the turning radius of the steering wheel is greater than the turning radius of the rear wheel during the steering process, and the head of the car is thrown outward when reversing, so it is necessary to pay attention to the front of the car to avoid rubbing.

Finally, we remind everyone to pay attention to the fact that when reversing, you should pay attention to the surrounding environment of the vehicle, do not focus on the rear of the car, especially when there are vehicles on the left and right, and from time to time take into account whether the front bumper of your vehicle will hit the vehicles on both sides. When passing by the parking space before parking, you should also pay attention to whether there are obstacles around the parking space, whether the terrain is flat, whether there are small animals in the parking space, etc.

If there are obstacles on both sides when parking, try to keep the vehicle to the left when reversing to the left and to the right when reversing to the right. This is more conducive to hitting the steering wheel back to the correct position earlier and shortening the reversing distance. Before the car stops, you have to go back to the steering wheel, or even play the steering wheel in the opposite direction, so that the vehicle can save a lot of trouble when it leaves the garage.

The above is the reversing and warehousing skills and some precautions introduced by Zhongyue.com for the students. Finally, Zhongyue hopes that all students will pass the driving school test as soon as possible.

Get your driver's license.

Pay attention to the distance between the car and the line, find the right point, and look at the rearview mirror.

One. Uphill stop, start.

Exam requirements: It is required to stop at a fixed position on a ramp with a slope of 10% and a length of 30 meters, and the coordination of direction, braking and clutch is examined.

Two. Side parking.

Exam requirements: Compulsory items for C and Z photos. The vehicle is required to move the vehicle into the right storage position without touching and wiping the pile rod of the storage position, and the wheels do not touch the lane edge line and the storage location sideline.

Reference method: 30 cm forward on the right side of the car, stop when the No. 1 pole is seen in the rear window, and there is a horizontal end line at the close distance in front of the car. Be sure to see the boom before and when reversing, the slower the reversing, the better, but you can't stop.

When reversing, hit the left turn signal, when the rear window of the car can not see the No. 1 lever, hit the direction to the right for one and a half circles, look at the left rearview mirror to see the No. 4 lever to the left for one and a half circles, look at the right rearview mirror of the front and see the No. 4 lever to the left for one and a half circles, look at the front of the right rearview mirror and the No. 1 pole overlap the direction to the left to the end of the body to stop at the right time, and then go forward to hit the right turn signal. Pay attention to the situation behind the road, and use the semi-linkage to move forward without the curb line in the direction of turning.

Three. Positive and negative library skills.

Exam Operational Requirements:

Reverse from starting point A to garage B stopping, advance to the return area of starting point C, then reverse into garage B to stop right, advance to end point A (starting point), and the test is completed.

Exam Judging Criteria:

1.The body shall not be out of the red line, otherwise the "body out of the line" is unqualified;

2.Do not stop when reversing or moving forward;

3.After pouring into the warehouse, it needs to be stopped;

4.After the test is completed, hang neutral and get out of the car and exit the test room.

First, the key points of reversing and warehousing.

1) Warehousing on the right.

1. The second and third dotted lines on the left are aligned with the steering wheel.

2. The left small reflector sees the dotted line to stop, step on the brake, step on the clutch, return to neutral gear in first gear, and hang up the reverse gear.

3. Release the brake, loosen the clutch, reverse, see the left red line (the red line is level with the window line), and the steering wheel is killed to the right, look (right rearview mirror).

4. The body overwhelms two-thirds of the dotted line in the garage, back to half a circle, reverses back to the garage, the car is parallel to the red line and back to a circle, see the red line of the garage is parallel to the shoulder, and stop.

2) Warehousing on the left.

1. Step on the brake, step on the clutch, and hang the first gear.

2. Loosen the brakes, slowly loosen the clutch, the window (a little more than a centimeter) intersects with the right-angle parallel line of the storage, and the steering wheel makes a circle and a quarter.

3. Look at the front of the left car small reflector front line pressing, step on the brake, press the clutch to the end, return to neutral gear in first gear, and press to change the reverse gear.

4. The tail of the car intersects at right angles to the left of the storage, and the steering wheel is killed to the left. (Look in the left rearview mirror).

5. Continue to reverse, the third dotted line presses two-thirds, and the steering wheel returns half a circle.

6. The car is parallel to the red line, and the steering wheel is turned around.

7. The storage shoulder is parallel to the red line, step on the brake, and press the clutch to the end.

8. Step on the clutch to the end, reverse gear back to neutral gear, and hang one gear.

9. Look at the angle of the left front door and intersect with the right-angle parallel line of the warehouse, the steering wheel is killed to the right, after going out, go back to half a circle, and then go back to a circle, and drive out.

Adjust the direction according to the rearview mirror and find the right point in the rearview mirror.

The speed of the vehicle should be slow, the direction of play should be fast, and the selection of storage reference materials should be paid attention to.

Secondly, understand the reversing into the storage of a few deductions, not according to the prescribed route, stop, reverse storage not in, out of the line, any one is fatal, which requires the usual practice of speed control, these are skills can not be said, not according to the prescribed route is human error, must pay attention to this aspect of the matter where to stop, need to hold down which line and their own coach to verify good.

Third, the right reverse, after the car drives to the stop point of the reversing, the front wheel of the car should cross the line, the rear wheel must not cross the line, stop reversing, when the lower edge of the left rearview mirror just blocked the second **, to the right to kill the direction, immediately look at the right rearview mirror, when the rear wheel just blocked the end of the long line in the middle of the library, back to a circle, continue to look at the right rearview mirror, when the wheel is parallel to the right line back to the right direction, reversing into the warehouse.

Fourth, if the car is too far to the right after encountering the first lap back to the right, it needs to be corrected, pay attention to the slow speed, which is to play the direction to the left after the direction is right, the amplitude should be small, and then look at the left and right rearview mirrors for fine-tuning, when the lower edge of the left rearview mirror just blocks the library horizontal line, while stepping on the clutch and brake to stop.

Fifth, do not start the left to the library immediately, to pause for a few seconds, one is to wait for positioning, and then to give yourself some time to sober up the nervous mood, recall the essentials of the left library, everything is ready, check the distance between the left and right sides of the body, the narrow side of the side to the direction of the direction and wait until the shoulder and the line out of the library alignment, and then look at the left rear wheel after the line to the left two laps to kill.