-
Upstairs is very complete, the top one
-
The pattern designer is a professional who plans the pieces of the clothing on the paper according to the style and size requirements designed by the clothing designer, through professional calculations, and plans the pieces that make up the garment, so that the pattern designer can ensure that the clothing is easy to modify and cut in the production process. Paper Pattern No Clan Master 1 has always had a high social status.
-
I'll help you organize and refine it so that you can learn and improve.
1. Analyze the structure of the piece according to the renderings of the design department;
The "designer" of some small factories is a rookie, and even if he can produce a structural drawing, only he can understand it) 2. Even if there is a sample, when peeling the plate, we should pay attention to the texture, elasticity, hot and cold scale of the fabric.
3. Start plate making and plane data correction.
4. Cut the sample cloth according to the paper pattern (necessary style).
5. The master is on the stage and makes detailed corrections.
6. Remove the sample and compare it with the cardboard, and correct the cardboard.
7. The fabrics and accessories used in accordance with the revised cardboard cutting plan.
8. Go to the stage and real person style, and ask about comfort.
9. There should be no big problem at this time, but there must be details that need to be adjusted.
10. According to the actual results, write the precautions for cutting the room with the sample worker, and then report to the person in charge of the technical department with the foundation board, sample clothing and report.
It should be noted that the scale, product structure, and management requirements of each enterprise are different, and may increase or decrease links, you can use your discretion!
-
The pattern maker is also called a pattern maker, and the name is slightly different depending on the region. The most direct job of the pattern maker is to make the corresponding paper pattern according to the design style drawing, of course, from the basic blank to the sample paper pattern and finally adjust it to the production paper pattern, transfer to the next program, to the plate pusher for grading, and then enter the production department, processing and production. In the meantime, the pattern maker should be responsible for communicating with the designer, completing the design intent, and achieving the unity of style, paper pattern, surface, and accessories (the so-called unification is the comprehensive adjustment of the three aspects, that is, the design defects, the paper pattern to complete, the surface, the characteristics of the accessories, and the paper pattern should be reflected), and then there is to follow up the completion of the sample and formulate the corresponding process requirements (some companies are another person to complete the process design, and most of them are formulated by the pattern maker).
The follow-up of the sample is completed, so as to adjust the details of the paper pattern to meet the requirements of the paper pattern that can be mass-produced. The next step is to hand over the plate pusher for grading, and then check the paper pattern after grading, and after checking that it is correct, it will be handed over to the production department for mass production.
-
The pattern designer must also understand the production method of the garment, and the board-making and sewing process must be closely coordinated, mainly the following points:
Seam structure, such as back seam, side seam, sleeve seam, upper collar seam, etc. The crotch seam, waist seam, side seam, etc. of the bottoms, as well as the expression method of sewing, there are split seams and inverted seams. The backseam can be divided into the backseam of the lock edge, the backseam of the hemming, the backseam of the open pressure line, the seam of the tube, the concealment of the concealment, the concealment of the concealment, etc., which should be left in the seam head when making the board to make different differences.
Sewing structure, the edge of each part or part of the garment should have a single fold or another single form of difference, such as hem, cuffs, trouser cuffs, stops, armholes, necklines, etc., these structural treatments should be reflected in the board making.
The difference in internal structure, including the structural relationship between the surface of the garment and the lining and other accessories, such as whether the jacket is hung in the whole or half mile, or not in the lining, its lining and production process must be changed, and different forms of changes should be made in the making of the board.
The purpose of the plastic surgery process is to shorten or elongate some parts to achieve the convex or concave on the surface, including manual pulling or shrinking, plus the fixation of the strip and the arch line contraction of the hand needle, etc., as well as the shaping of professional equipment, crotch pulling, breast ironing, etc., the treatment of these technological means must be properly processed and adjusted when making the board.
The actuary exam is going to be reformed in 11 years, adding some other subjects, more comprehensive, it can be said that it is more difficult to take the exam, the actuary exam takes a long time, you must have the stamina to persevere, if you want to say that it does not conflict with the postgraduate entrance examination, it depends on your own learning ability and time arrangement, there have been students who have taken the actuary certificate in the undergraduate examination, it seems that they have been prepared since the sophomore year, if you just want to take the postgraduate exam in this area, then it must be no problem, you can take a few of them during the university, I'll take the rest down during graduate school. >>>More
I am also facing a choice now, the registration in Tianjin has begun, my company is in Jiangsu, but I have been working on a business trip in Tianjin, and I haven't thought about going to the ** exam yet. Here's a ** for you. >>>More
It's all black (p fly me).
The earliest is Zuo Zuomu, Ono Xidaisi, and in the last 10 years, Wang Xingman's technology ranks in front of China. Leaders exist.
If you are blind, you can find a professional management agency for people with disabilities to help you with ideas!