If you feel too monotonous when decorating, is it better to use wallpaper or paint on the wall?

When decorating the home, I feel particularly monotonous, and the best choice of wallpaper on the wall is a wallpaper with rich colors and various patterns will be better than painting.

When the room is decorated, the most noticeable thing is the wallpaper on the wall, because the area of the wall is a relatively large area of the house. To make the room look better, you can choose wallpaper, which usually has wood fiber and mica sheets.

Wallpaper that is already made of paper, it is best to choose wallpaper with a variety of colors and rich patterns to make the whole room more warm. Some people also like latex paint.

Mainly synthetic resin, emulsion is the basic raw material, and the layer medium is dispersed through water and finally added filler and pigment to become a paint.

Both of these have some advantages of their own, which can be judged from many aspects, and there will be differences in the charges, so when talking about the **, be sure to use the most preferential ** to get the goods. Latex paint is generally 5 liters of a barrel, ** generally around 200 yuan to 300 yuan, at this time the labor cost is also relatively high, so the cost of latex paint is generally high. Wallpaper will be cheaper than dozens of yuan, the most expensive wallpaper is also around 300 yuan to 800 yuan, because the quality is not the same, if you choose imported wallpaper, this time ** will be higher, labor costs are also different, generally more expensive.

It can also be distinguished from the years of use, the general use of wallpaper ** will be higher than latex paint, but the use time of good wallpaper is generally 4 to 10 years, as long as the home is often ventilated, there will be no cracking problem, the use time is relatively long. From these aspects, you can choose the right wallpaper, because the wallpaper has to move more, and you can choose different wallpapers according to different rooms, which can make the whole family more warm.

The choice of wallpaper or paint, according to the actual needs, such as pay attention to the economy, afraid of trouble, choose paint, such as pay attention to the decoration effect, you can choose wallpaper. In addition, when decorating, the two can also be used together, in the bedroom with high air quality requirements, you can use paint and paint with low odor and less input; Wallpaper can be used in the living room and dining room to look beautiful.

I think it's better to paint it, because the color will look better when you paint it, and then there is another one that is more environmentally friendly.

When decorating, I feel that it is too monotonous, and the use of wallpaper or paint on the wall actually depends entirely on personal preference. Paint** will be a little cheaper. Wallpaper is more environmentally friendly and has fewer harmful substances.

What kind of paint to use for home decoration depends on what style of decoration you want to carry out and which functional area to use, because the characteristics of each paint are different, and only if they fit each other, the effect of decoration will be satisfactory.

1) Wood paint: Wood paint can be divided into three categories according to the gloss: matte, semi-matte, and high-gloss, which is mostly used on flooring and furniture.

Relatively speaking, wood paint is easy to apply and is not prone to bubbles and other problems, not only excellent water resistance, but also rust prevention. At the same time, it has very little pollution, and it can be regarded as an environmentally friendly home decoration paint material. However, it also has a disadvantage, that is, it is low hardness, and it will leave marks if it is scratched.

2) Latex paint: Latex paint is a kind of water-dispersible home decoration paint material, with synthetic resin as the base material, fast drying speed, good alkali resistance, hard paint film, smooth surface, and strong decorative effect. Moreover, the color adhesion function of latex paint is very strong, and it is perfect for painting walls or ceilings.

3) Exterior wall paint: As the name suggests, exterior wall paint is a home decoration paint material used on exterior walls, but it can sometimes be used in bathrooms because it is very waterproof, stain-resistant and self-cleaning.

4) Fireproof paint: fireproof paint is a kind of flame retardant coating, the main components are film-forming agent, flame retardant and foaming agent. Using it in home renovation can reduce fire hazards and protect family property.

There are three important categories of this type of paint and coating: decorative fireproof paint, wood fireproof paint and steel structure fireproof paint.

Paint picking tips.

1. Try to choose to buy in specialty stores or large shopping malls, before buying, you must learn to shop around, learn more about the details of the goods, such as origin, net weight, environmental protection standards, etc., for the same product, from its quality, quality and other aspects of comprehensive consideration.

2. To buy the least consumption, when purchasing, you should consult the merchant about the number of times the paint is painted and the area of the paint, and calculate the amount and cost of materials per square meter.

3. Look at the packaging, to see whether the outer packaging of the paint is standardized, whether there is an instruction manual and certificate (international inspection report and 3C quality certification), and the address of the manufacturer.

4. Smell the smell, the quality of the paint can be identified by the smell, the general environmental protection paint has a faint aromatic smell, and the inferior paint will emit a pungent smell, some people will say that the odorless one must be the best, this is not necessarily.

5. Look at the effect of opening the can. After the paint is opened, if the appearance is uniform and it is in a flowing state when stirred, it is a good paint, if it is layered, thickened, and smelly, it is of poor quality or deterioration.

We need to carry out the base treatment of the wall before painting, which is a key link to ensure the quality of construction, and must not be sloppy. If the wall is uneven, you also need to do a good job of leveling, to ensure that the wall base is smooth and clean.

After the base layer of the wall is treated, we first evenly paint the interface agent on the wall, which can enhance the adhesion of the base layer and prevent the coating from cracking and peeling to a certain extent. In addition, we also need to paste mesh fiber cloth and kraft paper in places such as water and electricity slotting places to prevent cracking.

Next, we started to paint the wall putty, and the putty needed to be brushed twice. The first time is to brush the exterior wall putty, because the exterior wall putty has a good viscosity and has strong resistance to the appearance of micro-cracks in the wall. After the exterior putty is completely dry, we are brushing the interior putty.

After the putty is dry, we sand the wall putty with sandpaper to make the wall surface smooth.

Finally, we can paint the wall with primer and topcoat, usually the primer needs to be brushed once, and the topcoat needs to be brushed twice. After the primer is brushed and dried, it is best to smooth it with sandpaper before brushing the topcoat. Be careful not to add too much brush when painting the topcoat.

We should pay attention to uniformity when painting, generally after the roller is painted, we need to use a brush to repair the missing places such as the corners of the wall.

Summary: What are the decoration painting processes, here is a brief introduction. I hope that after reading this article, you will be able to understand the process steps of painting. After you finish painting, you also need to protect the wall.

1. Deal with the base layer of the wall.

The base treatment of the wall is very important in the painting step, sloppy, you must know that the base treatment of the wall is not done, it will affect the subsequent process, so we must level the base before painting, in addition, because most of the rough houses are not flat, so it is necessary to carry out the leveling and cleaning process, when painting the wall, the old paint should be removed, if it is an old house of more than five years, the putty must be removed.

2. Apply the interface agent.

After the wall base layer is treated, it is time to select the brush interface agent. Since the interface agent can strengthen the adhesion to the base layer, it must be brushed evenly when brushing the interface agent.

3. Waterproof treatment.

For the kitchen and bathroom, which is prone to moisture, the space is waterproof, which requires the use of waterproof coatings, which are generally two-component, and some are three-component. Therefore, it is necessary to understand how to deploy before this construction.

Fourth, anti-crack treatment.

If there are cracks in the house, you need to paste kraft paper and mesh fiber cloth on the cracks and the connection between the light wall and the load-bearing wall to fill the gaps, otherwise the effect of brushing out is definitely not ideal.

Fifth, scrape putty.

After all the above wall problems are solved, you can enter the painting step, the first step is to brush putty, to mix the purchased putty powder evenly, it is best to place it for more than ten or twenty minutes.

6. Sandpaper sanding.

After the putty is dry, you will find that some places are not very evenly scraped, so it should be sanded with paper. The grinding method is to move closer to the center from the periphery.

7. Brush the primer.

Pay attention to symmetry when brushing the primer, to ensure that every corner of the wall can be brushed, of course, if the wall eats too much paint, it is best to add a little more water when brushing the primer, so that you can brush evenly.

8. Paint the topcoat.

After drying, use sandpaper to smooth it again, and finally brush the topcoat, remember not to put too much water in the topcoat, otherwise it will affect the thickness and feel, of course, the topcoat should be brushed twice.

1.Material acquisition.

Wall paints emit a lot of harmful gases, and the human body can damage the respiratory system if inhaled. Therefore, when the owner chooses decoration materials, he must find green and pollution-free materials. It should be noted that wall decoration materials are flammable and explosive objects, and it is best to place them in a cool area.

2.Shovel insulation.

The function of the insulation layer is to stabilize the indoor air temperature and reduce the impact of thermal expansion and contraction of the wall. Therefore, the clear water room will be laid with a layer of insulation. When the owner is decorating, the first thing he needs to do is remove the insulation layer. If the construction is directly in the insulation layer, it is easy to peel off in the later stage.

3.The walls are leveled.

The first step of the painter entering the site is to level the wall, eliminate and repair the cracks, sand and unevenness of the wall.

4.Grassroots treatment.

Painters apply adhesive and hang mesh cloth on the walls. Both of these steps are designed to extend the life of the wall and ensure the quality of the wall.

5.Brush the putty three times.

Prepare putty with putty powder and paint it on the wall. The painter needs to paint the wall three times, each time after the putty has completely solidified, and then apply it a second time. After painting, the workers also need to use sanding paper to break the wall flat.

The most common wall treatment method in daily life - painting large white walls, you only need to brush putty three times.

6.Paint up.

The construction master first needs to make a color adjustment. If the color of the latex paint is not well adjusted, it will affect the finished product. Painting needs to be done at least twice, and when brushing once, you can add 5% more water to allow the paint to absorb better on the wall.

After the painting is completed, the painter still needs to polish and smooth it.

Nowadays, many homeowners like to paint their walls with latex paint. Sometimes, they think that painting the walls is simple and can be done on their own. So how do you make your own paint? Next, let's take a look at the basic steps of painting a wall.

The first is how to prepare for the paint, and paste the color separation paper on the doors, window frames, and the connection with the paint to play a protective role. In addition, it is necessary to seal the finished wooden cabinets, partitions and other furniture with newspapers to prevent paint dripping and staining the furniture.

How to paint evenly is to clean up the items that need to be painted. Carefully sand with sandpaper and then wipe clean with a slightly damp cloth.

This is the official start of how to do the paint job. When staining the paint, we should pay attention to the method, not random. First of all, don't get too much paint on the brush. Then, dip the paint on the wall a few times as the brush starts to brush, and apply the paint from the brush to the surface from top to bottom.

When painting, you can't just brush it, so pay attention to the method. First, start with the last dip and brush upwards and return to the place where you started. Then, brush down in the direction you just went to where there is paint.

Finally, go back to the brush so that even if the brush is finished, the paint on the brush has been evenly brushed on the wall. Generally, it is brushed 3 times, and each time it is slightly dried before continuing. In the process of brushing, you should not be impatient, and you should brush slowly in order to prevent the generation of bubbles.

This is the key to how to make paint.

There are a few things to keep in mind when considering how to make paint. First of all, you must be slow when brushing, look at the place where you brush to see if there are bubbles, and if there are bubbles, you will burst them immediately. Secondly, be sure to wear a mask and glasses, masks can properly reduce the inhalation of harmful gases, and glasses can prevent paint from dripping into the eyes.

The above are the specific steps and related precautions on how to make paint.