Which is more cost effective in terms of decoration costs? Why?

The extent to which brick walls and floor pressures can save money on renovation costs depends on the specific situation and different factors. In general, a ground pressure wall may be relatively cheaper, and here are the reasons:

1.Construction difficulty: The construction difficulty of the ground pressure wall is relatively small and simple, and the construction and masonry process of the brick wall are omitted. The ground pressure wall is usually poured with concrete, and the construction speed is relatively fast, and the labor cost may be low.

2.Material cost: Ground pressure walls are usually constructed using concrete, which is a relatively cheap raw material.

In contrast, brick walls require the use of bricks and mortar, which can be more costly. In addition, the construction process of the ground pressure wall may reduce the waste of masonry waste, reducing the cost of material waste.

Here is a recommended decoration artifact, enter the city and area, and give the overall decoration budget according to the most affordable local market building materials and construction**: [Enter the area, 3 seconds to calculate it for free**].

No longer have to worry about being tricked by the decoration company, raising the price at will, omitting to increase the price.

However, it is important to note that the specific difference in renovation costs is also affected by other factors, such as the following:

1.Architectural design requirements: If the building design requires the use of brick walls, then ground pressure walls are not an option. In this case, it is important to choose the type of wall that meets the design requirements, not just the cost savings.

2.Decoration style: Floor-pressed walls may be more suitable for modern minimalist or industrial style decoration, while brick walls are more suitable for traditional or rustic style decoration. The choice of decoration style will also affect the choice and cost of building materials.

3.Floor requirements: If the ground condition is complex, uneven, or requires special treatment, then brick wall pressing may be a better option. Brick walls provide flatness and stability to the floor, while being aesthetically pleasing and functional.

In summary, a ground pressure wall may be relatively cost-effective because it is simple to construct and the cost of materials is lower. However, when decorating, you also need to consider factors such as architectural design requirements, decoration style, and ground conditions to choose the type of wall that best suits your needs. Before making a final decision, it is best to consult with a professional renovation company or designer to evaluate the specific situation and get accurate advice.

If you want to find a reliable company to help you, the best way is to let the company compete, Tuba Rabbit one-stop decoration platform intelligently matches 4 local companies, the company PK is more pressured, and naturally gives a good conscience plan: [Click here, free intelligent matching of 4 local companies].

Kunming - [Kunming Decoration Strategy Guide].

Suzhou - [Suzhou Decoration Strategy Guide].

Hefei - [Hefei Decoration Strategy Guide].

Fuzhou - [Fuzhou Decoration Strategy Guide].

Beijing - [Beijing Decoration Strategy Guide].

Dalian - [Dalian Decoration Strategy Book].

Hangzhou - [Hangzhou Decoration Strategy Guide].

Shanghai - [Shanghai Decoration Strategy Guide].

Tianjin——[Tianjin Decoration Strategy Guide].

The 1st. In terms of cost, the first one is more economical. Because if the color of your wall extends downward, it will be more cost-effective for your home decoration. In terms of color and color system, well, it is more compatible, from the strong pressure.

Ground pressed walls are more cost-effective because the loss is not as large. The way the wall is pressed will increase the chance of chrome damage to the tile.

A person's emotional changes before, during and after home improvement are quite large, from the curiosity at the beginning, to the collapse in the middle, and then to the relief in the later stage, which is varied and uncontrollable. But no matter how bad the emotional out-of-control, it can't stop us from absorbing decoration knowledge and learning more details about home decoration. For example, what we want to talk about today about the construction of ceramic tiles, in the end, when pasting tiles, should the wall press the ground or the ground press the wall?

Ground pressed walls. Advantages of ground pressure walls:

Generally speaking, the ground pressure wall is the wall tiles from the bottom to the top, so that the tiles are not easy to produce hollowing, and the overall appearance will be more beautiful.

Disadvantages of ground pressed walls:

After a long time, it is easier to accumulate dust, and the gap between the floor tiles and wall tiles is relatively large from the naked eye, which will affect the waterproof effect and the overall aesthetics.

The wall is pressed to the ground. Advantages of wall pressing:

It can ensure that the water on the wall can be left directly along the slope of the floor tile into the floor drain, and will not be left in the gap. If you use a floor-pressed wall, it will easily become trapped in the crevices and cause odors. And over time, the dry ash layer will also become moldy, and the moisture will be left along the dry ash layer to the door, which will cause the floor of other rooms to deform and arch.

In general, the overall aesthetics of the wall is better, and there will be no too large gaps with the naked eye.

Comparison of the two from the construction operation:

The construction of wall pressing bricks will be more troublesome to operate, and you can't start from the bottom brick, you have to start from the second one, and after the tiles are paved, the bottom wall bricks will be pasted, so that you can just press the floor tiles. If it is a ground pressure wall, the wall tiles can be pasted from the bottom, and after the wall is pasted, the floor tiles can be paved.

The wall is pressed to the ground. Little Rabbit Summary: Although the operation of the wall pressing the floor will be more troublesome, Little Rabbit suggests that you should not be afraid of trouble, do not be afraid of the consumption of the shirt bridge, insist on doing the wall and pressing the ground, or know that the waterproof performance is better, especially the bathroom.

If the bathroom is made of wall pressing, the water is not easy to penetrate into the corner of the wall, and the aesthetics are better, and the gap in the edge will not be visible.

You can get it for free

In the decoration, we should first paste the wall tiles, reserve enough distance at the bottom of the wall tiles, from the second row to the top, until the wall tiles are completed, and then lay the floor tiles from the inside to the outside, and finally cut the tiles of the appropriate size to the row at the bottom of the wall according to the reserved size. Toilet leakage has nothing to do with this toilet brush waterproofing, the main brick is before the toilet floor is a protective layer, our construction method first paste the wall, because the toilet floor has a slope first paste the wall tile can ensure the integrity of the wall tile and floor tile! It is also convenient for construction, more beautiful and more practical!

Bathroom decoration often considers pasting tiles, tile paste, beautiful, easy to maintain. But pasting tiles is a delicate drip. Be sure to paste the floor tiles first and press the floor with the wall, this is because the kitchen is a humid space, paste the floor tiles first, and then press the floor tiles with the wall tiles, which can avoid problems such as water flowing out with the gap between the floor tiles and breeding bacteria.

In the bathroom decoration, there are two construction methods for the connection between tiles and wall tiles, one is the wall tile pressing floor tile, and the other is the floor tile pressing wall tile. These two different methods have led to a lot of entanglements for many people who don't know which construction method is good. Shaw specifically consulted with the expert owner, only to know that there are many ways.

As you can see from the diagram, how to paste the wall tiles before laying the floor tiles so that the integrity of the paving method will be better. But some people think that there are gaps in the pressure wall, and water can easily seep in and may leak downstairs.

If the water seeps into the downstairs, in fact, the waterproofing is not good, and it has nothing to do with the wall pressure. As long as it's waterproof, it won't leak! Let's take a look at the construction method of pressing the wall.

The construction method of pressing wall bricks is to lay the bricks in good condition, and after the wall tiles are pasted, the bottom should be retained and the bricks should be pasted. This kind of brick will have cracks, and the overall feeling is not as good as pressing the wall. There is not much difference between the ground pressure wall or wall pressure construction and laying method, see which method you like, as for the waterproof effect, after laying the floor tiles, you need to do the waterproof construction of the floor tile beauty joints, the waterproof beauty joints are not handled well, and any method of laying tiles is useless, so whether the wall pressure or the ground pressure wall is the same.

Therefore, the most standard method for pasting tiles for bathroom decoration is wall tile pressure floor tile, that is, a row of tiles at the bottom of the wall tile, which should be pasted after the floor tile is pasted, and the final laying effect is the wall tile pressure floor tile instead of the floor tile pressure wall tile. The benefits will be obvious, not only will there be no joints, but they will also look good visually, the joints are tile glaze, and the waterproofing is good, but the disadvantage is that the requirements of the technicians will be very high.

Floor decoration is a very important part of the whole home decoration. Usually everyone chooses ceramic tiles as a material for decorating flooring! Tiling is a test of the master's technical level.

There are two main ways to apply tiles, pressing the wall and pressing the wall. A lot of people don't know which way is better. Let's hear what the Master has to say about it.

When decorating, you need to paste the wall tiles first, leave enough distance in the bottom row of wall tiles, and paste them from the second row to the top.

After the wall tiles are laid, the floor tiles are laid from the inside out. Finally, according to the reserved size, cut a tile of suitable size and spread it to the bottom row of the wall. Whether the bathroom leaks or not has little to do with this.

After the bathroom is waterproofed, the master should first make a protective layer for the bathroom floor, and then paste tiles. Our construction method here is to stick to the wall first and then to the floor, because if the bathroom floor has a slope, the wall tiles can ensure the integrity of the wall tiles and floor tiles! It is also convenient for construction, more beautiful and more practical!

Most workers prefer the decoration method of wall tiles and floor tiles, because it can not only save energy, but also shorten the decoration time. The most important thing is that it is not easy to make mistakes when decorating, but this kind of decoration master has very high technical requirements for workers. If you are not an experienced old decorator, then it is still very risky to choose this decoration method.

Tiles pasted with this method have a number of advantages. There is not much difference between how a ground pressure wall is laid and a ground pressure wall.

It's up to you to see which method you prefer. As for the waterproof effect, after the floor tiles are paved, it is necessary to do a good job in the waterproof construction of the floor tiles with beautiful joints. If the waterproof joints are not treated well, any method of laying tiles is useless, so it is the same whether it is a ground pressure wall or a ground pressure wall.

In fact, the practice of wall pressing the floor is more complicated, and the bottom row is not pasted. For the structure of wall tiles with floor tiles, first paste the tiles of the bathroom, and then the tiles at the bottom of the wall!In this way, the corners are seamed very tightly, which can be effectively waterproof and beautiful.

In fact, in other places, the effect of pressing the wall or pressing the wall is poor, but for the kitchen, bathroom and other places with more moisture, it is easy to enter the ground through the gap, and the advantages of pressing the wall are obvious.

I don't think it's a waste of money, this kind of decoration effect is better, it is a kind of planning for the house, it will make the house look more exquisite, and the gap is smaller, the water on the wall can flow down and directly into the floor drain, which will not lead to the hollowing of the wall.

I don't think it's a waste of money to press the wall, there are many advantages of this decoration, and it's not much more expensive, depending on personal preference.

I don't agree with this point of view, different decoration styles, different material choices, and different decoration methods are needed.

I don't think it's a waste of money, because the process of pressing the wall is better, which makes the room more durable.

Tile paving, choose the ground to press the wall or the wall to press the groundHow is the ground pressure wall constructed?Ground pressed walls. When the walls and pavement are to be tiled, the wall tiles should be laid first.

The main reason is that if the floor tiles are laid first, the whole process of waiting for the floor tiles to dry must consume a lot of time, resulting in an increase in the construction period - if the floor tiles are not dry, the tiles must be stepped on the floor tiles again, resulting in the deformation of the floor tiles, the wall is hollow, and the level is not leveled. Stick all the walls on and then til. In this way, the bottom of the wall tile can be blocked by the floor tile, which is called "ground pressure wall".

The wall is pressed to the ground. It is still to lay the wall first, but in the case of tiling, leaving the bottom row of floor tiles not pasted, and gradually pasting tiles. After all the floor tiles are pasted, the bottom row of tiles is pasted. In this way, the part of the floor tile close to the edge of the wall can be blocked by the wall brick, which is called "wall pressing the floor".

The benefits of wall pressing;The benefits of wall tiles and floor tiles can be described in two words: neat and beautiful. In order to avoid the thermal expansion caused by the drying of the mixed mortar, we should pre-bury a certain space here - in fact, it is a very wide gap.

If there were no wall tiles to block it, the gap between the child's fingers would be immediately exposed, which was very ugly. At the same time, the gap is filled with concrete, and the surface is uneven. After a long time, there will be traces of water and even mold here.

Needless to say, black and ugly are also very easy to breed bacteria.

the benefits of ground pressed walls; Floor tiles pressed against wall tiles are a favorite form of paving for the construction team, because the benefits are obvious: the construction is simple. In the above "construction method of wall pressing", we said that when the wall tiles are pressed tiles, the bottom row must be buried when the tiles are pasted, and then pasted after the tiles are pasted - this is concise and clear, but it is very difficult to make.

When pasting tiles, how much is more suitable for pre-embedding? The floor tiles have not yet been pasted, and we only have to estimate the thickness of the floor tiles, leaving an approximate value.

Ceramic tiles are paved with two ways of ground pressure and wall pressure, it is recommended to choose the wall to press the ground, the wall pressure to the ground looks, beautiful, concise, generous, the corner of the wall is small, not easy to leak, the ground pressure wall is paved first, the tile is fixed with a tool to prevent falling off, and finally the floor tiles are paved.

The wall is pressed up by wall tiles, and the gap between the two generally exists on the façade, which is not obvious from the plane. But if you press the painting against the wall, the gap is usually on the flat surface, so you can see the gap at will, which lowers the value of the space by several levels. If tiling is to press the wall against the ground, the gap between the two generally exists on the vertical plane, and there is no obvious gap from the plane.

However, if it is pressed against the wall, the gap will be more obvious. From the outside, it is definitely the former that looks better.