Will a steam trap continue to drain without pressure?

Updated on society 2024-08-12
12 answers
  1. Anonymous users2024-02-16

    The work of the trap is mainly based on the pressure difference, and in principle it cannot work without pressure. If the drop of the head is artificially raised, a certain pressure difference can be formed, so that the trap can work.

    If the inlet pressure of the trap is less than the outlet pressure (i.e., the negative pressure state), the ordinary trap will not work, and a pump trap needs to be used to drive steam to make the trap work.

  2. Anonymous users2024-02-15

    This is determined according to different equipment and different use conditions, such as discs, inverted barrels, float traps, condensate can not be excluded without pressure, if the float trap is selected, only the installation position is relatively low, it is possible to discharge, the best choice is the thermostatic trap, this series of traps is saturated water supercooled discharge, only below the saturation temperature of 7-10 degrees, the trap is opened, if there is no steam pressure, when the condensate temperature drops to the trap opening condition, The trap is fully open and is suitable for continuous drainage without pressure.

  3. Anonymous users2024-02-14

    Here are some of the well-known brands recognized in the valve industry, which are widely recognized and have a high reputation. While rankings may vary depending on time and market conditions, the following brands are generally considered to be among the top brands in the valve industry:

    The following are the top ten domestic first-line valve brand manufacturers in 2022-2023, but for reference only: Suzhou Neway Valve Co., Ltd., Shanghai Guanlong Valve Machinery, Shanghai Qizhong Valve Manufacturing, Sanhua, Su Yan, Shentong, Su Valve, Nanfang, Jiang.

    First, the word Yao. The above manufacturers are only estimates and references, and the specific situation may vary or fluctuate at any time due to changes in a series of factors such as changes in the market, the size of the competition pattern, and the stability of product quality. As an indispensable key device in industrial production and civil facilities, the quality and reputation of the valve brand directly affect the satisfaction and trust of users.

    These brands are known in the valve industry for their innovative technology, high-quality products and reliability. It is important to note that the market and industry are evolving rapidly, and different rankings may vary depending on time and region. For the most up-to-date ranking information, it is recommended to refer to industry reports, professional organizations or market research data for more detailed and accurate information.

  4. Anonymous users2024-02-13

    Without pressure, the medium will not flow in the pipe, so it won't.

  5. Anonymous users2024-02-12

    Hello, it is a pleasure to serve you and give you the following answer: the steam pressure of the trap is greater than the water pressure. Causes of the problem:

    1.Improper design of the trap results in a steam pressure greater than the water pressure. 2.

    The drain of the trap is blocked, causing the steam pressure to be greater than the water pressure. 3.The drain of the trap is clogged, causing the steam pressure to be greater than the water pressure.

    Workaround:1Check the design of the trap to ensure that the steam pressure is less than the water pressure.

    2.Clean the drain of the trap to ensure that the steam pressure is less than the water pressure. 3.

    Check the drain of the trap to make sure the steam pressure is less than the water pressure. Steps:1

    Check the design of the trap to ensure that the steam pressure is less than the water pressure. 2.Clean the drain of the trap to ensure that the steam pressure is less than the water pressure.

    3.Check the drain of the trap to make sure that the vapor pressure is less than the water pressure. 4.

    Check the drain of the trap to make sure the steam pressure is less than the water pressure. 5.Check the drain of the trap to make sure the steam pressure is less than the water pressure.

    Personal Tips:1When installing a trap, attention should be paid to the magnitude of the steam pressure and water pressure to ensure that the steam pressure is less than the water pressure.

    2.Regularly inspect the drain of the trap to ensure that the vapor pressure is less than the water pressure. 3.

    If you find that the steam pressure is greater than the water pressure, the drain port of the trap should be cleaned in time to ensure that the steam pressure is less than the water pressure. Related knowledge: A steam trap is a device used to control steam pressure, and its role is to control the steam pressure so that it is less than the water pressure to prevent it.

  6. Anonymous users2024-02-11

    Summary. The main reasons for steam discharge from traps: 1. Product quality problems, poor sealing of the disc seat.

    2. Installation problems, when using, you should understand how the trap you choose should be installed, if it is not installed according to the regulations, then there will be problems, such as: the horizontal installation is installed vertically. 3. There may be impurities in the trap, just disassemble and clean it.

    The main reasons for the steam discharge from the trap are: 1. Product quality problems, and the valve disc makes the valve seat poorly sealed. 2. Installation problems, when using, you should understand how to install the trap you choose, if it is not installed according to the regulations, then there will be problems, such as:

    The horizontal installation is vertically installed. 3. There may be impurities in the trap, so it will be good to disassemble and clean it.

    Other reasons for this failure are: 1There is garbage in the valve body, which affects the closure of the float; 2.The sealing surface of the valve seat has been worn and the seal has failed; 3.Seat gasket damage; 4.float deformation; 5.The automatic cooling and excitation device fails.

  7. Anonymous users2024-02-10

    Summary. The main purpose of a trap is to control the flow of steam, so while your system is running, the trap will always be venting steam to keep the system in balance.

    The main function of the trap is to control the flow of steam, so when your system is running, the steam will be discharged all the time to keep the system balanced.

    In addition, if there is abnormal exhaust, you need to pay attention.

    The main function of the trap is to discharge the condensed water in time in the steam transfer system to keep the steam in the pipeline unblocked. If the trap keeps venting steam, it could be due to the fact that the trap is not installed correctly

    There are certain requirements for the installation position, direction and height of the trap, and if it does not meet the requirements, it will affect its normal operation. If not installed properly, the trap may not be able to drain the condensated water, and the tenant can only discharge the steam continuously. Damage to the inside of the trap:

    The internal parts of the trap include the valve core, valve seat, spring, etc., if these parts are damaged or worn, the trap will not work properly and will continue to discharge steam. Blockages in pipes: If there is significant fouling, sediment, or material blockage inside the pipes, it can prevent the trap from draining water, causing the trap to only discharge steam.

    System pressure is too high: If the pressure in the steam transfer system is too high, the trap will not open and the water will be discharged, and only steam will be discharged.

    What is the normal temperature of the condensate after hydrophobicity.

    Under normal circumstances, the temperature of the condensate discharged after the trap is drained should be similar to the ambient temperature, generally around 20.

    This is because in the steam dry and vertical transmission system, due to the high temperature and high pressure inside the pipe, part of the water evaporates into steam, while the other part of the water is condensed into condensate. When the trap discharges condensate, the temperature should be close to the ambient temperature, as the main function of the trap is to remove the condensed water, not to reduce the steam temperature.

  8. Anonymous users2024-02-09

    The large disc is a trap. Essential.

    The function of DU is to discharge the DAO condensate, air and carbon dioxide gas in the steam system as soon as possible. At the same time, it automatically prevents the leakage of steam to the greatest extent.

    The pipeline connected next to it is called a bypass pipe, and a shut-off valve is generally installed on the top, which is generally opened manually at the initial stage of steam supply, and the pressure storage and condensate in the pipeline are quickly discharged as soon as possible, and the steam is discharged in large quantities, so that the condensate is discharged through the trap. Another function of the bypass pipeline is that when the trap fails, the shut-off valve can be opened slightly when the steam is temporarily stopped, which can be used for drainage, which can temporarily ensure the operation of the system.

  9. Anonymous users2024-02-08

    Your drawings are not very graphic.

  10. Anonymous users2024-02-07

    Hello dear! We're happy to answer for you! <>

    Can steam traps automatically pressurize water to convey: A: Yes, steam traps can automatically pressurize water to convey.

    Steam traps can control temperature and pressure, so that the water transfer force is stable and the flow rate is adjustable. When the water pressure becomes high, the trap closes, preventing steam from passing through the trap and reducing the amount of water transported. When the water pressure decreases, the trap opens to stabilize the steam flow and effectively maintain the pressure in the line. In addition, the air steam trap can also control the amount of steam discharged and prevent steam overload.

  11. Anonymous users2024-02-06

    Summary. Hello dear, steam traps are allowed to leak. According to the requirements of the national standard, the air leakage rate of the trap must be less than 3%, and about 80% of the domestic products do not meet the allowable air leakage rate of 3% stipulated in the standard.

    When steam leaks, a large amount of white steam comes out, accompanied by a strong noise, which causes a large increase in the steam indicated in the boiler room and a drop in pressure.

    Hello, dear, the steam trap is allowed to leak. According to the requirements of the national standard, the air leakage rate of the trap must be less than 3%, and about 80% of the domestic products do not meet the allowable air leakage rate of 3% stipulated in the standard. When steam leaks, a large number of white vapor steam comes out of the leaking plexus, accompanied by a strong noise, which causes a large increase in the steam indicated in the boiler room and a drop in pressure.

    Dear, <>

    Raw steam is often colorless, and when a steam trap leaks, the colorless gas becomes visible at a distance from the outlet pipe, and has a high velocity and force. But if the gas produced appears to be at a lower velocity and can be seen at the outlet of the pipe, then it is very likely that the gas is "flashing steam".

  12. Anonymous users2024-02-05

    Summary. <>

    Hello, dear, I'm glad to have your question, is the steam trap allowed to leak, help you find out, no, there is no trap suitable for all working conditions, the type and working principle of the trap should match the steam use and condensate discharge characteristics as much as possible, the wrong selection of the trap type is an important cause of trap leakage. Hope mine can help you. Wishing you good health and a happy mood!

    Do steam traps allow water leakage.

    Hello, dear, I'm glad to have your question, is the steam trap allowed to leak, help you find out, not quietly allowed, there is no trap suitable for all working conditions, the type and working principle of the trap should match the steam use and condensate discharge characteristics as much as possible, the type of trap is an important reason for the leakage of the trap Pure Sakura. Hope mine can help you. Wishing you good health and a happy mood!

    Pro, steam is also known as "water vapor". According to the pressure and temperature, the various types of steam are classified as: saturated steam, trapped superheated steam grinding wide. The main uses of steam are: heating and humidification; It can also generate power; as a machine drive, etc. Shoot the wandering thoughts.

Related questions
16 answers2024-08-12

There are three ways to spread it.

In addition to sexual transmission, there are blood-borne and mother-to-child transmission. >>>More

10 answers2024-08-12

The swelling is due to the rupture of a large number of capillaries inside the tissue of the injured part, and the blood quickly oozes out, forming local congestion and swelling, and cold compresses can be applied within 24 hours of injury to promote local blood vessel constriction, reduce the congestion and swelling of the affected area, and block the bleeding port as soon as possible; The cold compress cools the local area, dulls the sensory nerve response, and has the effect of relieving pain. 24 hours after the injury, massage or warm compress can be applied to the affected area to promote blood circulation, speed up the absorption and subside of congestion, and help the injured tissue repair and heal. **Can use plaster**Suggestion: >>>More

31 answers2024-08-12

Even without a head, the cockroach's body controls its normal activities. Without a head and a mouth, if you don't eat, you'll always die, right? Actually, no, cockroaches can still survive for a long time without eating or drinking, because they don't need much nutritional support, as long as they eat for a day, even if they don't eat or drink for the next few weeks, they still live full of energy. >>>More

12 answers2024-08-12

Shrimp preservation method:

1. If the fresh shrimp is not stored in the refrigerator, it is best to make dried shrimp, the dried shrimp will be stored for a long time, and it can be used for cooking and soup; >>>More

5 answers2024-08-12

Balzac. When Balzac was young, he ate only a small amount of bread because of poverty; To satisfy his hunger, he drew many dishes with chalk on the table and put love. >>>More