What should I do if my phone gets wet and keeps turning into headphone mode?

The headphone mode is equal to the switch of the jack without reset, forming an open circuit state, and the situation that you can solve by yourself is:

1. If there is dirt on the contact of the earphone socket, plug and unplug the socket several times to disconnect it and reconnect it.

2. If the dirt in the earphone jack causes poor contact, use the plug to dip the plug in anhydrous alcohol to clean the inside of the socket if possible.

3. If you can't solve the problem by yourself, please go to the maintenance point to replace the headphone jack.

It may be caused by a short circuit caused by moisture in the headphone jack of your mobile phone, or due to a foreign object that causes poor contact between the contacts in the headphone jack, which can be cleaned with a cotton swab or paper towel; If the problem still cannot be solved, it is recommended to check and repair at an after-sales service point. Here's a closer look:

1. In general, this is caused by the dampness of the mobile phone or the water entering the headphone jack, try to throw out the water in the earpiece, and then gently screw in the water with a cotton swab, and then use the hair dryer to turn on the hot air and slowly dry the remaining moisture, and restart the mobile phone;

2. It may also be due to poor contact in the headphone jack of the mobile phone, or it may be caused by foreign objects inside, use a cotton swab or paper towel to clean it up;

3. If it still can't be solved after cleaning, it may be caused by the failure of the headphone jack, and it is recommended to take the mobile phone to the after-sales maintenance point for inspection and repair.

In this case, the owner can use a hair dryer to blow on the mobile phone for a while, and the moisture in the mobile phone should be blown out, or directly blow the headphone jack. Let's see if that can be fixed. If you want to go to the after-sales service, you can replace a headphone jack.

It depends on what brand of mobile phone you have? And then do you turn on the headphone mode, sometimes the mode is wrong, and then you can't turn it off? What brand do you think this brand is? Then make the repair shop repair, and the brand of each mobile phone is not like ** and is also different.

The mobile phone enters headphone mode 1 for no reason, and there is no sound when the mobile phone is played, and the earphone icon is also displayed, indicating that the mobile phone has entered the headphone mode. Second, the reason and solution for the mobile phone to display the headset mode: 1. It is because of a foreign object in the earphone.

This situation is mostly related to the user's sloppiness and carelessness, and the solution is very simple, find a relatively thin thing, clean the headphone jack, and clean up the dirt inside. 2. Water ingress into the mobile phone causes a short circuit.

The phone appears in headphone mode for no reason.

Foreign body entering the earphones. In this case, find a relatively thin thing, clean the headphone jack, and clean up the dirt inside.

The sound of the mobile phone suddenly changes to headphone mode, which generally occurs because the phone is plugged into the headphones, and if you want to return to normal mode, you only need to unplug the headphones. If the earphones are still in headphone mode after unplugging the phone, you can turn off the phone and restart it, and this problem can be solved after restarting.

If the phone is still in headphone mode after shutting down and restarting, it means that the chip in the headphone jack of the phone has not bounced back, you can use the headset to plug in the phone repeatedly to try, and you can return to normal mode after the chip pops back. There is also a possibility that there is a foreign object in the headphone jack of the mobile phone, you need to check whether there is a foreign object in the earphone jack of the mobile phone, if there is a foreign body, you need to find a small tweezer to take it out. If it is caused by a lot of dust in the headphone jack of the mobile phone, you can use a cotton swab to clean it up, or cut the tape into thin strips and stuff it into it to stick the dust.

If it is the headphone mode caused by water ingress on the phone, you can wipe the phone clean, and put the phone in a cool and ventilated place for a longer time, and remember not to expose the phone to the sun after the phone is flooded.

If you are using a Huawei phone and the headset icon is displayed on the interface of the phone without plugging in the earphones, you can do the following:

1.If there is liquid or dust in the headphone jack, try to clean it.

2.Try plugging and unplugging the headphones once or restarting your phone.

3.If your phone still displays an abnormality, contact Huawei Consumer Service** (950800), back up your data in advance (third-party apps such as WeChat and QQ need to be backed up separately), and bring your proof of purchase to a Huawei Customer Service Center near you for further assistance.

Make an appointment for service. Repair spare parts** inquiry.

Boarding service.

The headphone mode is displayed because there is water in the headphone jack.

Induction thinks the headphones are plugged in.

Use a cotton swab or toilet paper bar to suck the water out of the headphone jack, or blow dry the water.

If the phone is in water, it is best not to move it first.

Blow with a blow blow.

Or put it in a rice bag.

Just wait a while.

<>1. When the earphones are damp, the cold air of the hair dryer should be blown far away, if they are very close, the components inside will be blown out of place, and the liquid will be damaged.

2. Another way is to place the earphones in a backlight, dry and ventilated place, and the moisture problem of the earphones will be significantly improved after a period of time.

3. Another way is to put the desiccant in the snack and the damp earphones in a sealed box, and after a period of time, the sound of the earphones will sound as crisp and durable as before.

1. After drying the damp place of the mobile phone, restart it after turning it off to see if you can remove the headphone mode.

2. Enter the mobile phone settings and modify the audio call method, taking the iPhone 7 mobile phone as an example, the specific method is as follows:

1. First click "Settings" on the desktop of your iPhone 7 phone.

2. After entering the settings, select the "General" option.

3. Then find the "Accessibility" item and click to enter.

4. After entering, find the "Audio Call Mode" item and click to enter.

5. After entering, select "Auto" or "Speaker", so that the phone will be released from the headphone mode.

1. If the earphones are plugged into the headphone jack of the mobile phone, unplug the earphones to cancel the earphone mode.

2. Restart the phone first, and when the main interface appears after restarting, press and hold the back touch button, as shown in the box in the figure, that is, exit mode.

3. If the headphone mode is still prompted, you can restore the factory settings to brighten up. 1.Enter the main interface of the phone, and then enter the "Settings").

2.Coming to the phone's settings interface, we select "Advanced Settings". 3.

Coming to the phone's advanced settings interface, we select "Backup & Reset". 4.Coming to the phone's advanced settings interface, we select "Backup & Reset".

5.Coming to the factory reset interface of the phone, we choose "Reset phone". 6.

Coming to the phone's reset phone field interface, we enter our lock screen password and click "Next". 7.Finally, we select "Reset Phone" again, and the phone will enter the reset stage.

4. If it still doesn't work, it may be that the internal parts of the mobile phone are faulty, and it is recommended to repair the mobile phone.