Excuse me: T410i 2G can t boot 10 when increasing memory

Dear Lenovo users, hello!

For the problem you said, first of all, it may be because of compatibility problems that lead to such problems, it is recommended that you send your computer to the nearest Lenovo service station for memory testing and then install memory modules, Lenovo engineers will provide you with better service, to provide you with a service station query ** link.

As for the memory you said can be displayed in 32-bit mode, it is recommended that you reinstall the pure version of the 64-bit operating system because the memory can only be reached due to the word length limitation in the 32-bit system. For your convenience, we provide you with a driver link.

IDEA Forum.

Think Forum.

Lenovo Community.

Are you OK with your 4G Kingston? You try to use only 4G boot to see if there is also memory, try not to mix clothes, easy to get up!

The ThinkPad T410i can be equipped with DDR3 1600MHz notebook copy sticks, but the capacity of a single slip cannot exceed 4GB.

The computer comes with a 2GB DDR3 1066MHz memory module and two SO-DIMM slots. The maximum memory capacity supported by this computer is 8GB, that is, the maximum capacity of a single bar is 4GB.

The original memory is underneath the keyboard and needs to be disassembled to see it.

To add new memory, simply open the memory cover on the back of the computer and you can add it.

First of all, it is definitely possible to expand the memory, and there are two memory card slots on the T410i motherboard, which can increase the memory according to the machine-back system configuration. Answer: I am the memory module that I bought myself in Zhongguancun, and it was OK when I started to use it, but then there was an incompatibility problem after a period of time, and it is recommended to buy it after careful inspection when choosing.

Dear Lenovo users, you can try to use only the original memory, whether it can boot normally, if it can, it may be a compatibility problem with the current memory; If it doesn't work, replace the current memory test, it is possible that the original memory has not been used for a long time, and there is a failure problem.

If you need it, you can contact your local service station for the following relevant testing and processing.

Think service station information inquiry:

Sincerely serve you! Wishing you good health!

You don't need to set anything, just add it.

If you feel that the extra nearly 1G memory is not being used, the next RAMdisk and SuperCache SuperVolume and the like, it is troublesome, but you can use this memory as a hard disk or buffer disk.

Actually, there's no need to add.,I've been 2G memory.,And installed the pure version of 32-bit win7,It's very smooth.。

I thought about adding it when I didn't add it.,After adding it, I suddenly found that there was no need to add it.。。。

Compatible only ADATA 1333 Jingdong is now on 2 g69 yuan,A total of 4g,After installation, you can only read out3g,Install it yourself,It's very convenient,Go to the store10Yuan,Lenovo after-sales service80Yuan,Don't set it。

Dear Lenovo users, hello!

The number of memory slots configured for you is 2, and the memory specification is: 1066MHz DDR3. The maximum memory capacity of a single memory slot is 4 Gbit, and the maximum memory capacity of a whole machine is 8 Gbit.

Installation suggestions: 1. It is best to maintain the same specifications as the standard memory, and there are not too many requirements for the brand, so it is recommended that you install regular manufacturers to produce memory, such as Kingston, Samsung, etc. In order to eliminate compatibility problems, it is recommended that you bring the machine with you when you buy the stool, and then add it after the actual test can be used normally.

2. If it is a memory with different specifications of the installed and pre-installed memory models, it may be used at a reduced frequency after installation, and there may be incompatibility problems, if you want to install a memory that is different from the pre-installed model, you need to carry out the actual installation test, if the system can be identified normally, it is recommended that you buy again.

3. In addition, it should be noted that the operating system will also have restrictions on memory recognition: if it is a Windows 32-bit operating system, it can generally only recognize about 3G memory size due to system limitations. If you need to identify 4GB or more of RAM, it is recommended to replace the 64-bit operating system.

If you're still using 32-bit, just add 2G.

If you change to a 64-bit one, add a 4G one. In addition, the 64-bit compatibility is very good, I have always used the 64-bit one, and many people also use the 64-bit one, no problem.

It's okay, 2g is fine, it's just in pairs, it's more wasteful. Because the CPU is i3, it's useless to have more. This is enough for a total of 4G.

The best, of course, is to use two 4G, a total of 8G, generally used, two 2G, a total of 4G will be better. The compatibility of the 64-bit system is also relatively good now.,There's no problem.,As for whether to use 64-bit,It's not about the amount of memory.,But it's what you like.,Anyway, with this kind of machine configuration,Use 64-bit,Personal feeling is more appropriate。 Of course, there is no problem with Samsung's memory module, which is better than the memory module of memory technology, but Samsung's is easy to buy fakes, so if you buy it yourself, be careful!

It's better to add a 2G memory module.,It's best to buy this model.,Because the frequency is not the same, there will be problems.,If you don't change the 64-bit system, you can only play the available memory.,64-bit has been in use.,I don't feel like there's any incompatibility problem.。

More than 3G memory, only 64-bit can play a performance